Browse by Journal or other publication

Article

Al-Sharabi, Mohammed and Markl, Daniel and Vivacqua, Vincenzino and Bawuah, Prince and MacLean, Natalie and York, Andrew P.E. and Zeitler, J. Axel (2024) Investigating the effect of sintering rate and solvent type on the liquid transport kinetics of α-alumina powder compacts. Chemical Engineering Science, 284. 119414. ISSN 0009-2509

Rajabi, Hamed and Rosario, Ruben and Grassia, Paul (2023) Transport of convected soluble surfactants on and within the foam film in the context of a foam fractionation process. Chemical Engineering Science, 281. 119100. ISSN 0009-2509

Grassia, Paul and Torres-Ulloa, Carlos (2023) A model for foam fractionation with spatially varying bubble size. Chemical Engineering Science, 281. 119163. ISSN 0009-2509

Singh, Deepshikha and Roy, Shantanu and Pant, Harish Jagat and Phirani, Jyoti (2023) Can fluid-solid contact area quantify wettability during flow? – a parametric study. Chemical Engineering Science, 280. 118992. ISSN 0009-2509

Grassia, Paul (2023) Quasistatic model for foam fractionation. Chemical Engineering Science, 275. 118721. ISSN 0009-2509

Rajabi, Hamed and Grassia, Paul (2023) Transport of soluble surfactant on and within a foam film in the context of a foam fractionation process. Chemical Engineering Science, 265. 118171. ISSN 0009-2509

Sheridan, Rachel and Cardona, Javier and Tachtatzis, Christos and Chen, Yi-Chieh and Cleary, Alison and Briggs, Naomi E. B. and Florence, Alastair and Atkinson, Robert and Michie, Craig and Andonovic, Ivan and Sefcik, Jan (2022) Effect of oscillatory flow conditions on crystalliser fouling investigated through non-invasive imaging. Chemical Engineering Science, 252. 117188. ISSN 0009-2509

Shojaei, Mohammad Javad and Méheust, Yves and Osman, Abdulkadir and Grassia, Paul and Shokri, Nima (2021) Combined effects of nanoparticles and surfactants upon foam stability. Chemical Engineering Science, 238. 116601. ISSN 0009-2509

Walsh, Erin and ter Horst, Joop H. and Markl, Daniel (2021) Development of 3D printed rapid tooling for micro-injection moulding. Chemical Engineering Science, 235. 116498. ISSN 0009-2509

Khadaroo, Sabeeha N.B.A. and Grassia, Paul and Gouwanda, Darwin and Poh, Phaik Eong (2019) Is the dewatering of Palm Oil Mill Effluent (POME) feasible? Effect of temperature on POME's rheological properties and compressive behavior. Chemical Engineering Science, 202. pp. 519-528. ISSN 0009-2509

Pei, Chunlei and Lin, Hungyen and Markl, Daniel and Shen, Yao-Chun and Zeitler, J. Axel and Elliott, James A. (2018) A quantitative comparison of in-line coating thickness distributions obtained from a pharmaceutical tablet mixing process using discrete element method and terahertz pulsed imaging. Chemical Engineering Science, 192. pp. 34-45. ISSN 0009-2509

Cardona, Javier and Ferreira, Carla and McGinty, John and Hamilton, Andrew and Agimelen, Okpeafoh S. and Cleary, Alison and Atkinson, Robert and Michie, Craig and Marshall, Stephen and Chen, Yi-Chieh and Sefcik, Jan and Andonovic, Ivan and Tachtatzis, Christos (2018) Image analysis framework with focus evaluation for in situ characterisation of particle size and shape attributes. Chemical Engineering Science, 191. pp. 208-231. ISSN 0009-2509

Grassia, Paul and Ubal, Sebastiàn (2018) Streamline-averaged mass transfer in a circulating drop. Chemical Engineering Science, 190. pp. 190-218. ISSN 0009-2509

Yu, Hui and Yue, Hong and Halling, Peter (2018) Comprehensive experimental design for chemical engineering processes : a two-layer iterative design approach. Chemical Engineering Science, 189. pp. 135-153. ISSN 0009-2509

Bacariza, M.C. and Graça, I. and Bebiano, S.S. and Lopes, J. M. and Henriques, C. (2018) Micro- and mesoporous supports for CO2 methanation catalysts : a comparison between SBA-15, MCM-41 and USY zeolite. Chemical Engineering Science, 175. pp. 72-83. ISSN 0009-2509

Agimelen, Okpeafoh S. and Mulholland, Anthony J. and Sefcik, Jan (2017) Modelling of artefacts in estimations of particle size of needle-like particles from laser diffraction measurements. Chemical Engineering Science, 158. pp. 445-452. ISSN 0009-2509

Jimenez, Melanie and Miller, Brian and Bridle, Helen L. (2017) Efficient separation of small microparticles at high flowrates using spiral channels : application to waterborne pathogens. Chemical Engineering Science, 157. pp. 247-254. ISSN 0009-2509

Powell, K.A. and Croker, D.M. and Rielly, C.D. and Nagy, Z.K. (2016) PAT-based design of agrochemical co-crystallization processes : a case-study for the selective crystallization of 1:1 and 3:2 co-crystals of p-toluenesulfonamide/triphenylphosphine oxide. Chemical Engineering Science, 152. pp. 95-108. ISSN 0009-2509

Stamatopoulos, Konstantinos and Alberini, Federico and Batchelor, Hannah and Simmons, Mark J.H. (2016) Use of PLIF to assess the mixing performance of small volume USP 2 apparatus in shear thinning media. Chemical Engineering Science, 145. pp. 1-9. ISSN 0009-2509

Agimelen, Okpeafoh S. and Jawor-Baczynska, Anna and McGinty, John and Dziewierz, Jerzy and Tachtatzis, Christos and Cleary, Alison and Haley, Ian and Michie, Craig and Andonovic, Ivan and Sefcik, Jan and Mulholland, Anthony J. (2016) Integration of in situ imaging and chord length distribution measurements for estimation of particle size and shape. Chemical Engineering Science, 144. pp. 87-100. ISSN 0009-2509

Grassia, Paul and Ubal, Sebastian and Giavedoni, Maria Delia and Vitasari, Denny and Martin, Peter James (2016) Surfactant flow between a Plateau border and a film during foam fractionation. Chemical Engineering Science, 143. pp. 139-165. ISSN 0009-2509

Zhang, Yi and Grassia, Paul and Martin, Alastair and Usher, Shane P. and Scales, Peter J. (2015) Designing thickeners by matching hindered settling and gelled suspension zones in the presence of aggregate densification. Chemical Engineering Science, 134. pp. 297-307. ISSN 0009-2509

Tachtatzis, Christos and Sheridan, Rachel and Michie, Craig and Atkinson, Robert C. and Cleary, Alison and Dziewierz, Jerzy and Andonovic, Ivan and Briggs, Naomi E.B. and Florence, Alastair J. and Sefcik, Jan (2015) Image-based monitoring for early detection of fouling in crystallisation processes. Chemical Engineering Science, 133. pp. 82-90. ISSN 0009-2509

Zhang, Yi and Grassia, Paul and Martin, Alastair and Usher, Shane P. and Scales, Peter J. (2015) Mathematical modelling of batch sedimentation subject to slow aggregate densification. Chemical Engineering Science, 128. pp. 54-63. ISSN 0009-2509

Agimelen, Okpeafoh S. and Hamilton, Peter and Haley, Ian and Nordon, Alison and Vasile, Massimiliano and Sefcik, Jan and Mulholland, Anthony J. (2015) Estimation of particle size distribution and aspect ratio of non-spherical particles from chord length distribution. Chemical Engineering Science, 123. pp. 629-640. ISSN 0009-2509

Coleman, S. and Roy, S. (2014) Effect of ultrasound on mass transfer during electrodeposition for electrodes separated by a narrow gap. Chemical Engineering Science, 113. pp. 35-44. ISSN 0009-2509

Grassia, Paul and Zhang, Yi and Martin, Alastair D. and Usher, Shane P. and Scales, Peter J. and Crust, Adam H. and Spehar, Rudolf (2014) Effects of aggregate densification upon thickening of Kynchian suspensions. Chemical Engineering Science, 111. pp. 56-72. ISSN 0009-2509

Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Internal mass transfer enhancement in flow-through catalytic membranes. Chemical Engineering Science, 104. pp. 1090-1106. ISSN 0009-2509

Vitasari, Denny and Grassia, Paul and Martin, Peter (2013) Surfactant transport onto a foam lamella. Chemical Engineering Science, 102. pp. 405-423. ISSN 0009-2509

Zhang, Yi and Martin, Alastair and Grassia, Paul (2013) Prediction of thickener performance with aggregate densification. Chemical Engineering Science, 101. pp. 346-358. ISSN 0009-2509

Hamilton, Peter and Littlejohn, David and Nordon, Alison and Sefcik, Jan and Slavin, Paul and Andrews, John and Dallin, Paul (2013) Investigation of factors affecting isolation of needle-shaped particles in a vacuum-agitated filter drier through non-invasive measurements by Raman spectrometry. Chemical Engineering Science, 101. pp. 878-885. ISSN 0009-2509

Jimenez, M. and Dietrich, N. and Hébrard, G. (2013) Mass transfer in the wake of non-spherical air bubbles quantified by quenching of fluorescence. Chemical Engineering Science, 100. pp. 160-171. ISSN 0009-2509

Kherbeche, A. and Milnes, J. and Jimenez, M. and Dietrich, N. and Hébrard, G. and Lekhlif, B. (2013) Multi-scale analysis of the influence of physicochemical parameters on the hydrodynamic and gas-liquid mass transfer in gas/liquid/solid reactors. Chemical Engineering Science, 100. pp. 515-528. ISSN 0009-2509

Zhang, Yi and Martin, Alastair and Grassia, Paul (2013) Mathematical modelling of time-dependent densified thickeners. Chemical Engineering Science, 99. pp. 103-112. ISSN 0009-2509

Lopes, J.P. and Alves, M.A. and Oliveira, Monica and Cardoso, S.S.S. and Rodrigues, A.E. (2013) Regime mapping and the role of the intermediate region in wall-coated microreactors. Chemical Engineering Science, 94. pp. 166-184. ISSN 0009-2509

Magueijo, Vitor and Anderson, Lynsey and Fletcher, Ashleigh and Shilton, Simon James (2013) Polysulfone mixed matrix gas separation hollow fibre membranes filled with polymer and carbon xerogels. Chemical Engineering Science, 92. pp. 13-20. ISSN 0009-2509

Grancic, Peter and Illeova, Viera and Polakovic, Milan and Sefcik, Jan (2012) Thermally induced inactivation and aggregation of urease : experiments and population balance modelling. Chemical Engineering Science, 70. 14–21. ISSN 0009-2509

Grassia, P. and Usher, S.P. and Scales, P.J. (2011) Closed-form solutions for batch settling height from model settling flux functions. Chemical Engineering Science, 66 (5). pp. 964-972. ISSN 0009-2509

Sousa, P.C. and Pinho, F.T. and Oliveira, Monica and Alves, M.A. (2011) Effect of the contraction ratio upon viscoelastic fluid flow in three-dimensional square-square contractions. Chemical Engineering Science, 66 (5). pp. 998-1009. ISSN 0009-2509

Sweatman, Martin B. (2010) Equilibrium behaviour of a novel gas separation process, with application to carbon capture. Chemical Engineering Science, 65 (13). pp. 3907-3913. ISSN 0009-2509

Ubal, S. and Harrison, C.H. and Grassia, P. and Korchinsky, W.J. (2010) Numerical simulation of mass transfer in circulating drops. Chemical Engineering Science, 65 (10). pp. 2934-2956. ISSN 0009-2509

Granato, Miguel A. and Jorge, Miguel and Vlugt, Thijs J. H. and Rodrigues, Alirio E. (2010) Diffusion of propane, propylene and isobutane in 13X zeolite by molecular dynamics. Chemical Engineering Science, 65 (9). pp. 2656-2663. ISSN 0009-2509

Lamia, Nabil and Jorge, Miguel and Granato, Miguel A. and Almeida Paz, Filipe A. and Chevreau, Hubert and Rodrigues, Alirio E. (2009) Adsorption of propane, propylene and isobutane on a metal–organic framework : molecular simulation and experiment. Chemical Engineering Science, 64 (14). pp. 3246-3259. ISSN 0009-2509

Korchinsky, W.J. and Grassia, P. and Harrison, C.H. (2009) Multicomponent mass transfer in films and rigid drops : the influence of concentration-variable diffusivity. Chemical Engineering Science, 64 (3). pp. 433-442. ISSN 0009-2509

Puxty, G. and Neuhold, Y.M. and Jecklin, M. and Ehly, M. and Gemperline, P. and Nordon, A. and Littlejohn, D. and Basford, J.K. (2008) Multivariate kinetic hard-modelling of spectroscopic data: a comparison of the esterification of butanol by acetic anhydride on different scales and with different instruments. Chemical Engineering Science, 63 (19). pp. 4800-4809. ISSN 0009-2509

Grassia, P. and Usher, S.P. and Scales, P.J. (2008) A simplified parameter extraction technique using batch settling data to estimate suspension material properties in dewatering applications. Chemical Engineering Science, 63 (7). pp. 1971-1986. ISSN 0009-2509

Curtis, R.A. and Lue, L. (2006) A molecular approach to bioseparations : protein-protein and protein-salt interactions. Chemical Engineering Science, 61 (3). pp. 907-923. ISSN 0009-2509

Soos, M. and Sefcik, J. and Morbidelli, M. (2006) Investigation of aggregation, breakage and restructuring kinetics of colloidal dispersions in turbulent flows by population balance modeling and static light scattering. Chemical Engineering Science, 61 (8). pp. 2349-2363. ISSN 0009-2509

Grassia, P. and Neethling, S.J. (2004) Iterative approach to weir drainage. Chemical Engineering Science, 59 (20). pp. 4349-4359. ISSN 0009-2509

Lattuada, M and Wu, H and Sandkuhler, P and Sefcik, J and Morbidelli, M (2004) Modelling of aggregation kinetics of colloidal systems and its validation by light scattering measurements. Chemical Engineering Science, 59 (8-9). pp. 1783-1798. ISSN 0009-2509

Curran, S.J. and Black, R.A. (2004) Quantitative experimental study of shear stress and mixing in progressive flow regimes within annular flow bioreactors. Chemical Engineering Science, 59 (24). pp. 5859-5868. ISSN 0009-2509

Zhang, Y.H. and Reese, J.M. (2003) The drag force in two-fluid models of gas-solid flows. Chemical Engineering Science, 58 (8). pp. 1641-1644. ISSN 0009-2509

Buffham, B.A. and Hellgardt, K. and Heslop, M. and Mason, G. and Richardson, D.J. (2002) Modelling and simulation of the flux responses of a gas-solid catalytic micro-reactor. Chemical Engineering Science, 57 (6). pp. 953-966. ISSN 0009-2509

Oliveira, Monica and Ni, X. (2001) Gas hold-up and bubble diameters in a gassed oscillatory baffled column. Chemical Engineering Science, 56 (21-22). pp. 6143-6148. ISSN 0009-2509

Sefcik, J and McCormick, A V (1999) Prediction of crystallization diagrams for synthesis of zeolites. Chemical Engineering Science, 54 (15-16). pp. 3513-3519. ISSN 0009-2509