Browse by Journal or other publication

Article

Li, Qiang and Wang, Xiaotong and Qin, Yi and Huang, Kunlan and Wang, Jie (2024) Improvement of the fatigue life of an electron-beam welded Ti2AlNb joint subjected to an electromagnetic coupling treatment. Materials Science and Engineering: A, 909. 146848. ISSN 0921-5093

Tamimi, Saeed and He, Youliang and Sanjari, Mehdi and Pirgazi, Hadi and Kockelmann, Winfried and Robinson, Fiona and Mohammadi, Mohsen and Kestens, Leo (2022) Mechanical properties and crystallographic texture of non-oriented electrical steel processed by repetitive bending under tension. Materials Science and Engineering: A, 835. 142665. ISSN 0921-5093

Vyas, Hardik D. and Mehta, Kush P. and Badheka, Vishvesh and Doshi, Bharat (2022) Microstructure evolution and mechanical properties of continuous drive friction welded dissimilar copper-stainless steel pipe joints. Materials Science and Engineering: A, 832. 142444. ISSN 0921-5093

da Silva, L. and Sivaswamy, G. and Sun, L. and Rahimi, S. (2021) Effect of texture and mechanical anisotropy on flow behaviour in Ti-6Al-4V alloy under superplastic forming conditions. Materials Science and Engineering: A, 819. 141367. ISSN 0921-5093

Zheng, Jing-Hua and Pruncu, Catalin and Zhang, Kai and Zheng, Kailun and Jiang, Jun (2021) Quantifying geometrically necessary dislocation density during hot deformation in AA6082 Al alloy. Materials Science and Engineering: A, 814. 141158. ISSN 0921-5093

Song, Yuxuan and Ma, Yi and Chen, Haofeng and He, Zhibo and Chen, Hu and Zhang, Taihua and Gao, Zengliang (2021) The effects of tensile and compressive dwells on creep-fatigue behavior and fracture mechanism in welded joint of P92 steel. Materials Science and Engineering: A, 813. 141129. ISSN 0921-5093

Vysotskiy, Igor and Malopheyev, Sergey and Rahimi, Salaheddin and Mironov, Sergey and Kaibyshev, Rustam (2019) Unusual fatigue behavior of friction-stir welded Al-Mg-Si alloy. Materials Science and Engineering: A, 760 (7). pp. 277-286. ISSN 0921-5093

Whiteman, G. and Case, S. and Millett, J.C.F. and Cox, M.J. and Avraam, P. and Dear, J.P. and Sancho, A. and Hooper, P.A. (2019) Uniaxial compression of single crystal and polycrystalline tantalum. Materials Science and Engineering: A, 759. pp. 70-77. ISSN 0921-5093

Aletdinov, Ainur and Mironov, S. and Korznikova, G. and Konkova, Tatyana and Zaripova, Rida and Myshlyaev, Michail and Lee Semiatin, S. (2019) EBSD investigation of microstructure evolution during cryogenic rolling of type 321 metastable austenitic steel. Materials Science and Engineering: A, 745. pp. 460-473. ISSN 0921-5093

Yang, R. and Rahman, K.M. and Rakhymberdiyev, A.N. and Dye, D. and Vorontsov, V.A. (2018) Mechanical behaviour of Ti-Nb-Hf alloys. Materials Science and Engineering: A. ISSN 0921-5093

Yakushina, E. and Reshetov, A. and Semenova, I. and Polyakova, V. and Rosochowski, A. and Valiev, R. (2018) The influence of the microstructure morphology of two phase Ti-6Al-4V alloy on the mechanical properties of diffusion bonded joints. Materials Science and Engineering: A, 726. pp. 251-258. ISSN 0921-5093

Rahimi, Salaheddin and King, Michael and Dumont, Christian (2017) Stress relaxation behaviour in IN718 nickel based superalloy during ageing heat treatments. Materials Science and Engineering: A, 708. pp. 563-573. ISSN 0921-5093

Khayatzadeh, Saber and Flewitt, Peter E.J. and Smith, David and Tanner, David W.J. and Truman, C. E. (2017) Influence of thermal ageing on the creep behaviour of a P92 martensitic steel. Materials Science and Engineering: A, 708. pp. 544-555. ISSN 0921-5093

Mikhaylovskaya, A.V and Mosleh, A.O and Kotov, A.D and Kwame, J.S. and Pourcelot, T. and Golovin, I.S and Portnoy, V.K (2017) Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy. Materials Science and Engineering: A, 708. pp. 469-477. ISSN 0921-5093

Pérez, Marcos (2017) Impact of annealing treatments on the softening and work hardening behaviour of Jethete M152 alloy for subsequent cold forming processes. Materials Science and Engineering: A, 690. pp. 303-312. ISSN 0921-5093

Zare Chavoshi, Saeed and Gallo, Santiago Corujeira and Dong, Hanshan and Luo, Xichun (2017) High temperature nanoscratching of single crystal silicon under reduced oxygen condition. Materials Science and Engineering: A, 684. pp. 385-293. ISSN 0921-5093

Zare Chavoshi, Saeed and Luo, Xichun (2016) Molecular dynamics simulation study of deformation mechanisms in 3C-SiC during nanometric cutting at elevated temperatures. Materials Science and Engineering: A, 654. pp. 400-417. ISSN 0921-5093

Gzyl, Michal and Rosochowski, Andrzej and Boczkal, Sonia and Olejnik, Lech (2015) The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP. Materials Science and Engineering: A, 638. pp. 20-29. ISSN 0921-5093

Chrominski, W. and Olejnik, L. and Rosochowski, A. and Lewandowska, M. (2015) Grain refinement in technically pure aluminium plates using incremental ECAP processing. Materials Science and Engineering: A, 636. pp. 172-180. ISSN 0921-5093

Rosochowski, Andrzej and Olejnik, Lech and Richert, Jan and Rosochowska, Malgorzata and Richert, Maria (2013) Equal channel angular pressing with converging billets—experiment. Materials Science and Engineering: A, 560. pp. 358-364. ISSN 0921-5093

Konkova, T. and Mironov, S. and Korznikov, A. and Semiatin, S. L. (2011) On the room-temperature annealing of cryogenically rolled copper. Materials Science and Engineering: A, 528 (24). pp. 7432-7443. ISSN 0921-5093

Dai, X. and Yang, X. and Campbell, J. and Wood, J. (2003) Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings. Materials Science and Engineering: A, 354 (1-2). pp. 315-325. ISSN 0921-5093

Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093