Browse by Author or creator

Liu, Haixu and Li, Zhipeng and Zhang, Ping and Zuo, Dunwen and Xie, Wenkun (2024) Study of damage mechanism on single crystal 4H-SiC surface layer by picosecond laser modification (PLM). Applied Surface Science, 672. 160722. ISSN 0169-4332

Wang, Zhengjian and Luo, Xichun and Sun, Jining and Seib, Philipp and Phuagkhaopong, Suttinee and Xie, Wenkun and Chang, Wenlong and Liu, Qi and Chen, Xiuyuan (2024) Chip breakage in silk microfibre production using elliptical vibration turning. International Journal of Mechanical Sciences, 277. 109418. ISSN 0020-7403

Gao, Jian and Xie, Wenkun and Luo, Xichun and Qin, Yi and Zhao, Zhiyong (2024) Anisotropic effects in local anodic oxidation nanolithography on silicon surfaces : insights from ReaxFF molecular dynamics. Langmuir, 40 (30). 15530−15540. ISSN 0743-7463

Luo, Xichun and Liu, Qi and Puthanveettil Madathil, Abhilash and Xie, Wenkun (2024) Predictive digital twin-driven dynamic error control for slow-tool-servo ultraprecision diamond turning. CIRP Annals - Manufacturing Technology, 73 (1). pp. 377-380. ISSN 0007-8506

Wang, Zhengjian and Luo, Xichun and Hasan, Rashed Md Murad and Xie, Wenkun and Chang, Wenlong and Liu, Qi (2024) Design of a low-cost, high-precision rolling nanoelectrode lithography machine for manufacturing nanoscale products. In: 24th Euspen International Conference & Exhibition, 2024-06-10 - 2024-06-14, University College Dublin.

Gao, Jian and Xie, Wenkun and Luo, Xichun (2024) In-situ transient current detection in local anodic oxidation nanolithography using conductive diamond-coated probes. In: 24th International Conference & Exhibition, 2024-06-10 - 2024-06-14, University College Dublin.

Li, Zhipeng and Jin, Mengmeng and Liu, Haixu and Zuo, Dunwen and Xie, Wenkun (2024) The ablation behavior and modification mechanism of SiC under different laser energy. Journal of Materials Research and Technology, 30. pp. 8080-8091. ISSN 2238-7854

Hafeez, Hifza and Xie, Wenkun and Luo, Xichun (2023) Atomic and close-to-atomic scale manufacturing : status and challenges. In: 28th International Conference on Automation and Computing (ICAC2023), 2023-08-30 - 2023-09-01, Aston University.

Gao, Jian and Luo, Xichun and Xie, Wenkun and Qin, Yi and Hasan, Rashed Md. Murad and Fan, Pengfei (2023) Atomistic insights into bias-induced oxidation on passivated silicon surface through ReaxFF MD simulation. Applied Surface Science, 626. 157253. ISSN 0169-4332

Luo, Xichun and Gao, Jian and Xie, Wenkun and Hasan, Rashed Md. Murad and Qin, Yi (2023) Flexible single-step fabrication of programmable 3D nanostructures by pulse-modulated local anodic oxidation. CIRP Annals - Manufacturing Technology, 72 (1). pp. 177-180. ISSN 0007-8506

Shi, Xiaoquan and Sun, Yazhou and Li, Dekai and Liu, Haitao and Xie, Wenkun and Luo, Xichun (2023) Advances in wearable flexible piezoelectric energy harvesters : materials, structures and fabrication. Journal of Materials Science: Materials in Electronics, 34. 220. ISSN 0957-4522

Zhang, Jingran and Lu, Siwei and Shi, Guangfeng and Xie, Wenkun and Geng, Yanquan and Wang, Zuobin (2023) A study on a hybrid SERS substrates based on arrayed gold nanoparticle/graphene/copper cone cavities fabricated by a conical tip indentation. Journal of Materials Research and Technology, 22. pp. 1558-1571. ISSN 2238-7854

Shi, Xiaoquan and Sun, Yazhou and Li, Dekai and Liu, Haitao and Xie, Wenkun and Luo, Xichun; Yang, Chenguang and Xu, Yuchun, eds. (2022) Energy conversion model and extrusion 3D printing of piezoelectric composite energy harvesters. In: 2022 27th International Conference on Automation and Computing (ICAC). 2022 27th International Conference on Automation and Computing: Smart Systems and Manufacturing, ICAC 2022 . IEEE, GBR, pp. 1-6. ISBN 9781665498074

Gao, Jian and Luo, Xichun and Chang, Wenlong and Qin, Yi and Xie, Wenkun and Fan, Pengfei and Hasan, Rashed Md. Murad and Geng, Yanquan and Yan, Yongda (2022) Three-dimensional nanostructures enabled by customised voltage waveform-induced local anodic oxidation lithography. In: 22nd EUSPEN International Conference and Exhibition, 2022-05-30 - 2022-06-03, Hilton Geneva Hotel.

Zhang, Jingran and Wang, Yu and Zhang, Xinming and Xie, Wenkun and Li, Jing and Wang, Zuobin (2022) Study of the fabrication of gold nanoparticle–graphene-arrayed micro/nanocavities as SERS substrates compared to two different angles of triangular pyramid tips. Langmuir, 38 (16). pp. 4894-4905. ISSN 0743-7463

Xie, Wenkun and Fang, Fengzhou (2020) Rake angle effect in cutting-based single atomic layer removal. Journal of Manufacturing Processes, 56 (Part A). pp. 280-294. ISSN 1526-6125

Xie, Wenkun and Fang, Fengzhou (2019) Cutting-based single atomic layer removal mechanism of monocrystalline copper : edge radius effect. Nanoscale Research Letters, 14 (1). pp. 1-18. 370. ISSN 1931-7573

Chen, Wanqun and Zheng, Lu and Xie, Wenkun and Yang, Kai and Huo, Dehong (2019) Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling. Journal of Materials Processing Technology, 266. pp. 339-350. ISSN 0924-0136

Chen, Wanqun and Xie, Wenkun and Huo, Dehong and Yang, Kai (2018) A novel 3D surface generation model for micro milling based on homogeneous matrix transformation and dynamic regenerative effect. International Journal of Mechanical Sciences, 144. pp. 146-157. ISSN 0020-7403

Chen, Wanqun and Teng, Xiangyu and Zheng, Lu and Xie, Wenkun and Huo, Dehong (2018) Burr reduction mechanism in vibration-assisted micro milling. Manufacturing Letters, 16. pp. 6-9. ISSN 2213-8463

Xie, W. K. and Sun, Y. Z. and Liu, H. T. and Zhang, F. H. (2017) Investigations on oil detachment from rough surfaces in an aqueous solution. RSC Advances, 7 (49). pp. 31049-31060. ISSN 2046-2069

Wang, Quanlong and Bai, Qingshun and Chen, Jiaxuan and Su, Hao and Wang, Zhiguo and Xie, Wenkun (2015) Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper. Nanoscale Research Letters, 10 (1). pp. 1-8. 396. ISSN 1931-7573

Chen, Wanqun and Liang, Yingchun and Luo, Xichun and Xie, Wenkun; Luo, Xichun and Cao, Yi and Tong, Zhen, eds. (2014) An integrated dynamic design system for aerostatic spindle development. In: ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing. ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing . IEEE, GBR, pp. 96-99. ISBN 9781909522022