In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe

Zimermann, Rastislav and Mohseni, Ehsan and Vasilev, Momchil and Loukas, Charalampos and Wathavana Vithanage, Randika Kosala and MacLeod, Charles Norman and Pierce, Gareth and Lines, David and Pimentel Espirindio E Silva, Misael and Fitzpatrick, Stephen and Rizwan, Muhammad Khalid and Williams, Stewart and Ding, Jialuo (2023) In-process non-destructive evaluation of wire + arc additive manufacture components using ultrasound high-temperature dry-coupled roller-probe. In: European Conference on Non-Destructive Testing 2023, 2023-07-03 - 2023-07-07, Lisbon.

[thumbnail of Zimermann-etal-ECNDT-2023-In-process-non-destructive-evaluation-of-wire-arc-additive-manufacture-components]
Preview
Text. Filename: Zimermann_etal_ECNDT_2023_In_process_non_destructive_evaluation_of_wire_arc_additive_manufacture_components.pdf
Accepted Author Manuscript
License: Strathprints license 1.0

Download (87kB)| Preview

Abstract

Additive Manufacturing plays a significant role in Industry 4.0, where the demand for smart factories capable of fabricating high-quality customized products cost-efficiently exists. Wire + Arc Additive Manufacturing (WAAM) is one such technique that enables automated, time and material-efficient production of high-value geometrically complex metal parts. To strengthen the benefits of WAAM, the demand for robotically deployed in-process Non-Destructive Evaluation (NDE) has risen, aiming to replace manually deployed inspection techniques deployed after the full part completion. This novel research presents a synchronized multi-robot WAAM deposition & ultrasound NDE cell aiming to achieve defect detection in-process, enable possible in-process repair, and prevent costly scrappage or rework. The full external control NDE approach is achieved by the real-time force/torque sensor-enabled adaptive kinematics control package. A novel high-temperature dry-coupled ultrasound roller-probe device is employed to assess the structural integrity of freshly deposited layers of WAAM components. The WAAM roller-probe is tailored to facilitate the in-process inspection by dry-coupling coupling with the hot (< 350 °C) non-flat surface of WAAM using a flexible outer silicone tyre and solid core delay-line at speed and at high coupling force [1]. The demonstration of the in-process inspection approach is performed on hot as-built Ti-6Al-4V WAAM samples. The defect detection capabilities are assessed on artificially produced defects embedded inside these WAAM builds. In this work the defect detection is accomplished using 1) layer-specific beamforming focusing imaging and 2) volumetric inspection using post-processing algorithms applied to collected Full Raw Data e.g. Full Matrix Capture. The analysis and results comparison show promising results with a sufficient Signal-to-Noise ratio (< 10 dB). Hence, the research directly supports the industrial benefits of the WAAM process intending to achieve the automated production of first-time-right parts.

ORCID iDs

Zimermann, Rastislav, Mohseni, Ehsan ORCID logoORCID: https://orcid.org/0000-0002-0819-6592, Vasilev, Momchil, Loukas, Charalampos ORCID logoORCID: https://orcid.org/0000-0002-3465-8076, Wathavana Vithanage, Randika Kosala ORCID logoORCID: https://orcid.org/0000-0002-1023-2564, MacLeod, Charles Norman ORCID logoORCID: https://orcid.org/0000-0003-4364-9769, Pierce, Gareth ORCID logoORCID: https://orcid.org/0000-0003-0312-8766, Lines, David ORCID logoORCID: https://orcid.org/0000-0001-8538-2914, Pimentel Espirindio E Silva, Misael ORCID logoORCID: https://orcid.org/0000-0001-5927-643X, Fitzpatrick, Stephen ORCID logoORCID: https://orcid.org/0000-0002-3669-3262, Rizwan, Muhammad Khalid, Williams, Stewart and Ding, Jialuo;