Browse by Author or creator

Article

Herbert, Nicholas and Simpson, David and Spence, William D. and Ion, William (2005) A preliminary investigation into the development of 3D printing of prosthetic sockets. Journal of Rehabilitiation Research and Development, 42 (2). pp. 141-146. ISSN 0748-7711

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M. (2004) A simple, low cost method of producing a prosthetic socket for trans-tibial amputees. IEE Colloquium (Digest), 4-10408 (33). pp. 133-137. ISSN 0963-3308

Douglas, T. and Solomonidis, S.E. and Sandham, W.A. and Spence, W.D. (2002) Ultrasound image matching using genetic algorithms. Medical and Biological Engineering and Computing, 40 (2). pp. 168-172. ISSN 0140-0118

Douglas, T. and Solomonidis, S.E. and Sandham, W.A. and Spence, W.D. (2002) Ultrasound imaging in lower limb prosthetics. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 10 (1). pp. 11-21. ISSN 1534-4320

Spence, W.D. and Fowler, N.K. and Nicol, A.C. and Murray, S.J. (2001) Reciprocating gait prosthesis for the bilateral hip disarticulation amputee. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 215 (3). pp. 309-314. ISSN 0954-4119

Book Section

Finney, L. and Spence, W.D. and Solomonidis, S.E.; Boone, D., ed. (2004) Comparing the load distribution between quadrilateral and IC trans-femoral sockets. In: Proceedings of the 11th World Congress of the International Society for Prosthetics and Orthotics. Hong Kong National Society of the International Society for Prosthetics and Orthotics, p. 304. ISBN 998-97974-1-0

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M.; (2004) Design and development of transducers for the measurment of trans-tibial stump/socket interface stresses. In: BIOMED 2004: Kuala Lumpur International Conference on Biomedical Engineering. IFMBE Proceedings, 7 . Department of Biomedical Engineering, University of Malaya, Kuala Lumpur, Malaysia, pp. 327-328. ISBN 983-2085-68-3

Finney, L. and Solomonidis, S.E. and Spence, W.D.; Boone, D., ed. (2004) FE model of a trans-femoral prosthetic socket. In: Proceedings of the 11th World Congress of the International Society for Prosthetics and Orthotics. Hong Kong National Society of the International Society for Prosthetics and Orthotics, p. 305. ISBN 988-97974-1-0

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M.; Boone, D., ed. (2004) Interface pressure measurement of hydrocast and PTB sockets. In: Proceedings of the 11th World Congress of the International Society for Prosthetics and Orthotics. Hong Kong National Society of the International Society for Prosthetics and Orthotics, Hong Kong, p. 33. ISBN 998-97974-1-0

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M.; Boone, D., ed. (2004) The patellar tendon bar - the case for or against. In: Proceedings of the 11th World Congress of the International Society for Prosthetics and Orthotics. Hong Kong National Society of the International Society for Prosthetics and Orthotics, Hong Kong, p. 32. ISBN 998-97974-1-0

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M.; (2004) A simplified method of producing trans-tibial prosthetic socket. In: BIOMED 2004: Kuala Lumpur International Conference on Biomedical Engineering. IFMBE Proceedings, 7 . Department of Biomedical Engineering, University of Malaya, Kuala Lumpur, Malaysia, pp. 315-318. ISBN 983-2085-68-3

Conference or Workshop Item

Grant, M.H. and Spence, W.D. (2004) Long-term monitoring of activity in the below knee amputee. In: American Academy of Orthotists and Prosthetists Annual Meeting, 2004-02-24 - 2004-02-27.

Solomonidis, S.E. and Spence, W.D. and Kapatos, C. (2004) Measurements of the interface pressure between the stump and the socket and its relevance to the prosthetic socket design. In: 12th Orthopadie + Reha-Technik, World Congress, 2004-05-19 - 2004-05-22.

Abu Osman, N.A. and Spence, W.D. and Solomonidis, S.E. and Weir, A.M. (2003) Pressure distribution in patellar tendon bearing and hydrocast prosthetic sockets. a preliminary study. In: UK scientific meeting of the International Society for Prosthetics and Orthotics, 2003-10-03 - 2003-10-04.

Solomonidis, S.E. and Spence, W.D. and Lee, P.V. (2002) Modelling of the residual limb of trans-femoral amputees using finite element analysis. In: Orthopadie + Reha-Technik, World Congress, 2002-05-08 - 2002-05-11.

Finney, L. and Spence, W.D. and Solomonidis, S.E. (2001) Comparison of different material properties in an idealised FEM of socket donning. In: 10th World Congress of the International Society for Prosthetics and Orthotics, 2001-07-01 - 2001-07-06.

Finney, L. and Solomonidis, S.E. and Spence, W.D. (2001) Load sharing capability of a quadrilateral socket for a trans-femoral amputee. In: 10th World Congress of the International Society for Prosthetics and Orthotics, 2001-07-01 - 2001-07-06.