Browse by Author or creator

Article

Domingo-Roca, R. and Feeney, A. and Windmill, J. F. C. and Jackson-Camargo, J. C. (2024) On the directionality of membrane coupled Helmholtz resonators under open air conditions. Scientific Reports, 14 (1). 27771. ISSN 2045-2322

Gardiner, Alicia and Domingo-Roca, Roger and Windmill, James F. C. and Feeney, Andrew (2024) An adjustable acoustic metamaterial cell using a magnetic membrane for tunable resonance. Scientific Reports, 14 (1). 15044. ISSN 2045-2322

Asciak, Lisa and Domingo-Roca, Roger and Dow, Jamie R. and Brodie, Robbie and Paterson, Niall and Riches, Philip E. and Shu, Wenmiao and McCormick, Christopher (2024) Exploiting light-based 3D-printing for the fabrication of mechanically enhanced, patient-specific aortic grafts. Journal of the Mechanical Behavior of Biomedical Materials, 154. 106531. ISSN 1751-6161

Domingo-Roca, Roger and Gilmour, Lauren and Dobre, Oana and Sarrigiannidis, Stylianos and Sandison, Mairi E. and O'Leary, Richard and Mulvana, Helen E. (2023) 3D printing of noncytotoxic high-resolution microchannels in Bisphenol-a ethoxylate dimethacrylate tissue-mimicking materials. 3D Printing and Additive Manufacturing, 10 (5). pp. 1101-1109. ISSN 2329-7670

Asciak, Lisa and Gilmour, Lauren and Williams, Jonathan A. and Foster, Euan and Díaz-García, Lara and McCormick, Christopher and Windmill, James F. C. and Mulvana, Helen E. and Jackson-Camargo, Joseph C. and Domingo-Roca, Roger (2023) Investigating multi-material hydrogel three-dimensional printing for in vitro representation of the neo-vasculature of solid tumours : a comprehensive mechanical analysis and assessment of nitric oxide release from human umbilical vein endothelial cells. Royal Society Open Science, 10 (8). 230929. ISSN 2054-5703

Domingo-Roca, R. and Lasserre, P. and Riordan, L. and Macdonald, A.R. and Dobrea, A. and Duncan, K.R. and Hannah, S. and Murphy, M. and Hoskisson, P.A. and Corrigan, D.K. (2023) Rapid assessment of antibiotic susceptibility using a fully 3D-printed impedance- based biosensor. Biosensors and Bioelectronics X, 13. 100308. ISSN 2590-1370

Hannah, Stuart and Domingo-Roca, Roger and Hoskisson, Paul A. and Murphy, Michael E. and Corrigan, Damion K. (2022) Electrochemical antibiotic susceptibility testing – an emerging approach for fast and accurate determination of antibiotic effect in complex samples. Current Opinion in Electrochemistry, 35. 101033. ISSN 2451-9103

Domingo-Roca, Roger and Macdonald, Alexander R. and Hannah, Stuart and Corrigan, Damion K. (2022) Integrated multi-material portable 3D-printed platform for electrochemical detection of dopamine and glucose. Analyst, 147 (20). pp. 4598-4606. ISSN 0003-2654

Domingo-Roca, R. and Asciak, L. and Windmill, J. F. C. and Mulvana, H. and Jackson-Camargo, J. C. (2022) Non-destructive analysis of the mechanical properties of 3D-printed materials. Journal of Nondestructive Evaluation, 41 (1). 22. ISSN 0195-9298

Domingo-Roca, Roger and Foster, Euan and Jackson-Camargo, Joseph C. (2021) Acoustic band gaps in polyatomic chains of 3D-printed resonators. AIP Advances, 11 (12). 125306. ISSN 2158-3226

Gardiner, Alicia and Daly, Paul and Domingo-Roca, Roger and Windmill, James and Feeney, Andrew and Jackson, Joseph (2021) Additive manufacture of small-scale metamaterial structures for acoustic and ultrasonic applications. Micromachines, 12 (6). 634. ISSN 2072-666X

Tiller, Benjamin and Reid, Andrew and Zhu, Botong and Guerreiro, Jose and Domingo-Roca, Roger and Jackson, Joseph Curt and Windmill, J.F.C. (2019) Piezoelectric microphone via a digital light processing 3D printing process. Materials & Design, 165. 107593. ISSN 0261-3069

Domingo-Roca, R. and Jackson, J.C. and Windmill, J.F.C. (2018) 3D-printing polymer-based permanent magnets. Materials & Design, 153. pp. 120-128. ISSN 0261-3069

Domingo-Roca, Roger and Tiller, Benjamin and Jackson, Joseph Curt and Windmill, James Frederick Charles (2018) Bio-inspired 3D-printed piezoelectric device for acoustic frequency selection. Sensors and Actuators A: Physical, 271. pp. 1-8. ISSN 0924-4247

Book Section

Martinelli, Samuele and Reid, Andrew and Domingo-Roca, Roger and Windmill, James F.C.; (2023) Additive manufacturing of an insect bio-inspired hair acoustic sensor. In: IEEE SENSORS 2023. Proceedings of IEEE Sensors . IEEE, AUT. ISBN 9798350303872

Domingo-Roca, Roger and Gilmour, Lauren and Asciak, Lisa and Sarrigiannidis, Stylianos and Dobre, Oana and Salmeron-Sanchez, Manuel and Sandison, Mairi and O'Leary, Richard and Jackson-Camargo, Joseph and Mulvana, Helen; (2022) 3D-printed high-resolution microchannels for contrast enhanced ultrasound research. In: 2021 IEEE International Ultrasonics Symposium (IUS). 2021 IEEE Ultrasonics Symposium (IUS), 2021-Janu . IEEE, CHN, pp. 1-4. ISBN 9781665403559

Domingo-Roca, Roger and Saltin, Brian and Windmill, James and Jackson, Joseph and Mulvana, Helen; (2019) Rapid prototyped microvessel flow phantom for controlled investigation of ultrasound-mediated targeted drug delivery. In: 2019 IEEE International Ultrasonics Symposium, IUS 2019. IEEE International Ultrasonics Symposium, IUS . IEEE Computer Society Press, GBR, pp. 2390-2393. ISBN 9781728145969

Conference or Workshop Item

Martinelli, Samuele and Reid, Andrew Baxter and Domingo-Roca, Roger and Windmill, James F.C. (2023) Additive manufacturing of an insect bio-inspired hair acoustic sensor. In: IEEE Sensors 2023, 2023-10-29 - 2023-11-01, Hilton Vienna Park.

Domingo-Roca, R and Jackson, J C and Windmill, J F C (2018) 3D-printing polymer-based permanent magnets. In: Magnetism 2018, 2018-04-09 - 2018-04-10, University of Manchester.

Domingo-Roca, R. and Jackson, J. C. and Windmill, J. F. C. (2017) Bioinspired 3D-printed piezoelectric device for acoustic frequency separation. In: IEEE SENSORS 2017, 2017-10-29 - 2017-11-01, Scottish Exhibition and Conference Centre.