Browse by Journal or other publication

Article

Chen, Can and Xia, Qinxiang and Zhou, Haoyang and Zhao, Jie and Qin, Yi and Xiao, Gangfeng (2024) Study of the microstructure evolution of alloy structural steel and inhomogeneity effect of the microscale pulsed currents during current-assisted plane strain compressions by modeling a novel cellular automata method. Materials Characterization, 212. 113983. ISSN 1044-5803

Sanjari, Mehdi and Mahmoudiniya, Mahdi and Pirgazi, Hadi and Tamimi, Saeed and Ghoncheh, Mohammad Hossein and Shahriairi, Ayda and Hadadzadeh, Amir and Amirkhiz, Babak Shalchi and Purdy, Mackenzie and de Araujo, Edgar Gomes and Kestens, Leo and Mohammadi, Mohsen (2022) Microstructure, texture, and anisotropic mechanical behavior of selective laser melted maraging stainless steels. Materials Characterization, 192. 112185. ISSN 1044-5803

Wadge, Matthew D. and Carrington, Matthew J. and Constantin, Hannah and Orange, Kieran and Greaves, Jason and Islam, Md Towhidul and Zakir Hossain, Kazi M. and Cooper, Timothy P. and Kudrynskyi, Zakhar R. and Felfel, Reda M. and Ahmed, Ifty and Grant, David M. (2022) Characterization of potential nanoporous sodium titanate film formation on Ti6Al4V and TiO2 microspherical substrates via wet-chemical alkaline conversion. Materials Characterization, 185. 111760. ISSN 1044-5803

Nolze, Gert and Winkelmann, Aimo and Cios, Grzegorz and Tokarski, Tomasz (2021) Tetragonality mapping of martensite in a high-carbon steel by EBSD. Materials Characterization, 175. 111040. ISSN 1044-5803

Hicks, C. and Konkova, T. and Blackwell, P. (2020) Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates. Materials Characterization, 170. 110675. ISSN 1044-5803

Shamir, Muhammad and Syed, Abdul Khadar and Janik, Vit and Biswal, Romali and Zhang, Xiang (2020) The role of microstructure and local crystallographic orientation near porosity defects on the high cycle fatigue life of an additive manufactured Ti-6Al-4V. Materials Characterization, 169. 110576. ISSN 1044-5803

Pérez, Marcos and Dumont, Christian and Nodin, Olivier and Nouveau, Sebastien (2018) Impact of forging direction on the recrystallization behaviour of nickel base superalloy AD730 billet material at subsolvus temperatures. Materials Characterization, 146. pp. 169-181. ISSN 1044-5803

Konkova, T. and Rahimi, S. and Mironov, S. and Baker, T.N. (2018) Effect of strain level on the evolution of microstructure in a recently developed AD730 nickel based superalloy during hot forging. Materials Characterization, 139. pp. 437-445. ISSN 1044-5803

Rae, William and Lomas, Zak and Jackson, Martin and Rahimi, Salah (2017) Measurements of residual stress and microstructural evolution in electron beam welded Ti-6Al-4V using multiple techniques. Materials Characterization, 132. pp. 10-19. ISSN 1044-5803

Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M.M. and Semiatin, S.L. (2015) An EBSD investigation of cryogenically-rolled Cu-30%Zn brass. Materials Characterization, 101. pp. 173-179. ISSN 1044-5803