Picture of industrial robot

Transforming automated inspection & non-destructive testing: world-leading Open Access research on robotics, sensors & ultrasonics

Strathprints makes available scholarly Open Access content by researchers within the Centre for Ultrasonic Engineering, based within Electronic & Electrical Engineering.

Research at CUE brings together next generation robotics with sensing technology to enable inspection of high value components, such as aerospace components, at the point of manufacture. Non-destructive testing techniques using ultrasound and other sensors can then be deployed to assess components for structural faults or damage and thereby ensure they are built correctly and more efficiently. Research at CUE is to be stimulated by the construction of a new £2.5 million state-of-the-art Robotically-Enabled Sensing (RES) hub within the Department of Electronic & Electrical Engineering (EEE).

Explore the Open Access research by EEE, or explore all of Strathclyde's Open Access research...

Browse by Author or creator

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Publication Date | Item type | No Grouping
Jump to: 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001
Number of items: 19.

2008

Cruden, A. and Houghton, T. and Gair, S. and Duerr, M. and Agnew, G.D. and Stewart, E.M. and Lutz, A. (2008) Fuel cells as distributed generation. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222 (A7). pp. 707-720. ISSN 0957-6509

2007

Duerr, M. and Gair, S. and Cruden, A.J. and McDonald, J.R. (2007) Dynamic electrochemical model of an alkaline fuel cell stack. Journal of Power Sources, 171 (2). pp. 1023-1032. ISSN 0378-7753

Duerr, M. and Gair, S. and Cruden, A.J. and McDonald, J.R. (2007) Hydrogen and electrical energy from organic waste treatment. International Journal of Hydrogen Energy, 32 (6). pp. 705-709. ISSN 0360-3199

2006

Gair, S. and Cruden, A.J. and McDonald, J.R. and Hegarty, T. and Chesshire, M. (2006) Fuel cells for power generation and waste treatment. Journal of Power Sources, 154 (2). pp. 472-478. ISSN 0378-7753

2005

Durr, M. and Gair, S. and Cruden, A.J. and McDonald, J.R. (2005) Electric equivalent circuit model of an alkaline fuel cell. WSEAS Transactions on Circuits and Systems, 4 (9). pp. 1-6. ISSN 1109-2734

Takoudis, G. and Ault, G.W. and Gair, S. and McDonald, J.R. (2005) Method for assessing offshore wind farm cable reliability incorporating cost effectiveness of redundancy. In: Fifth International Workshop on Large-Scale Integration of Wind Power and Transmission Networks for Offshore Wind Farms, 2005-04-07 - 2005-04-08.

Ault, G.W. and Gair, S. and McDonald, J.R. (2005) Electrical system designs for the proposed 1GW beatrice offshore windfarm. In: IEA Annex XXIII: Offshore wind energy technology and deployment: WORKSHOP ON WIND INTEGRATION OF OFFSHORE WIND POWER, 2005-09-12 - 2005-09-13.

Duerr, M. and Gair, S. and Cruden, A.J. and Mcdonald, James and Hegarty, T. and Chesshire, M. (2005) Fuel cells for power generation and organic waste treatment on the island of Mull. In: International Conference on Renewable Energy and Power Quality, 2005-03-16 - 2005-03-18.

Duerr, M. and Gair, S. and Cruden, A.J. and McDonald, J.R. (2005) The design of a hydrogen organic fuel source/fuel cell plant. In: International Hydrogen Energy Congress and Exhibition., 2005-07-13 - 2005-07-15.

Currie, R.A.F. and Duerr, M. and Gair, S. and Ault, G.W. and Cruden, A.J. and McDonald, J.R. (2005) A hydrogen and fuel cell system for the optimisation of a grid-connected oscillating water column wave generator. In: World Hydrogen Technologies Convention (WHTC 2005), 2005-10-03 - 2005-10-05.

2004

Gair, S. and Cruden, A.J. and Cruden, Andrew and McDonald, J. and Hredzak, B. (2004) Electronic differential with sliding mode controller for a direct wheel drive electric vehicle. In: IEEE International Conference on Mechatronics (ICM 2004), 2004-06-03 - 2004-06-05.

Cvetkovski, G. and Petkovska, L. and Gair, S. (2004) Multi objective genetic algorithm optimal design of a pM disc motor. In: 5th IEE International Conference on Computation in Electromagnetics - CEM 2004, 2004-04-19 - 2004-04-22.

Gair, S. and Cruden, A.J. and McDonald, J.R. and Hegarty, T. and Chesshire, M. (2004) Organic electricity via hydrogen. In: 15th Annual U.S. Hydrogen Conference and Hydrogen Expo, 2004-04-26 - 2004-04-30.

2003

Hain, J.J. and Ault, G.W. and Galloway, S.J. and Gair, S. and McDonald, J.R. (2003) Towards a community impact assessment of renewable energy systems : a case study in the isle of Islay. In: 38th International Universities Power Engineering Conference (UPEC 2003)., 2003-09-01 - 2003-09-03.

Cvetkovski, G. and Petkovska, L. and Gair, S. (2003) Performance analysis of PM disc motor for direct electric vehicle drive. Electromotion, 10 (3). pp. 353-358. ISSN 1223-057X

2002

Cvetkovski, G. and Petkovska, L. and Cundev, M. and Gair, S. (2002) Improved design of a novel PM disc motor by using soft magnetic composite material. IEEE Transactions on Magnetics, 38 (5). pp. 3165-3167. ISSN 0018-9464

Wilson, C. and Cruden, A.J. and Gair, S. and Cruden, Andrew and McDonald, J.R. and Armstrong, B. (2002) The Scottish fuel cell consortium - a review of the first year of operation. In: 2nd International Conference on the Sustainable City, 2002-01-01.

2001

Gair, S. and Hredzak, B. and Cruden, A.J. (2001) Control and mechanical component reduction in an EV direct wheel drive. In: 4th International Symposium on Advanced Electromechanical Motion Systems, 2001-06-19 - 2001-06-20.

Cvetkovski, G. and Petkovska, L. and Cundev, M. and Gair, S. (2001) Performance characteristics improvement of a PM disk motor by using soft magnetic composite material. International Journal of Applied Electromagnetics and Mechanics, 13 (1-4). pp. 451-456. ISSN 1383-5416

This list was generated on Mon Apr 6 07:32:59 2020 BST.