Suction drain as a low carbon ground improvement technique : proof-of-concept at the laboratory scale

Martini, Michela and Tarantino, Alessandro and Sloan, Andy (2020) Suction drain as a low carbon ground improvement technique : proof-of-concept at the laboratory scale. Tunnelling and Underground Space Technology, 99. 103361. ISSN 0886-7798 (https://doi.org/10.1016/j.tust.2020.103361)

[thumbnail of Martini-etal-TUST-2020-Suction-drain-as-a-low-carbon-ground-improvement]
Preview
Text. Filename: Martini_etal_TUST_2020_Suction_drain_as_a_low_carbon_ground_improvement.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo

Download (1MB)| Preview

Abstract

The most common soil reinforcement methods used in tunnelling, such as jet grouting, fiberglass reinforcement and ground freezing, leave spoils into the ground and have high costs of implementation. On the other hand, preloading methods for soils improvement require long construction periods and limit the enhancement of the undrained shear strength to the applied surcharge load or vacuum load. This paper presents the concept of suction drain as an innovative technique for temporary stabilisation of geostructures in soft clayey soils, which overcomes the inconvenience of current soil reinforcement techniques and the limitation of the preloading. Based on suction generated in the ground by the evaporation from pre-drilled holes, the suction drain enables the enhancement of the undrained shear strength in soft clayey soils. The concept and its validation at mock-up scale level are presented in this study. The experimental investigation assessed the capacity of the suction drain to reduce the soil water content via soil water evaporation induced by forced ventilation. The mock-up scale test was then validated numerically via FEM modelling. Finally, the suction drain modelling was extended to an ideal case of tunnelling for assessing the potential impact of the suction drain on undrained shear strength and, hence, on tunnel face stability.

ORCID iDs

Martini, Michela ORCID logoORCID: https://orcid.org/0000-0002-2122-5992, Tarantino, Alessandro ORCID logoORCID: https://orcid.org/0000-0001-6690-748X and Sloan, Andy;