Melting of multipass surface tracks in steel incorporating titanium carbide powders

Tools

Mridha, Shahjahan and Idriss, A.N. and Maleque, M.A. and Jaacob, I.L. and Baker, Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836 (https://doi.org/10.1179/1743284714Y.0000000712)

[thumbnail of Mridha-etal-Mats-Sci-Tech-2015-Multipass-surface-tracks-in-steel-incorporating-titanium-carbide-powders-30-Oct-2014]
Preview
 PDF. Filename: Mridha_etal_Mats_Sci_Tech_2015_Multipass_surface_tracks_in_steel_incorporating_titanium_carbide_powders_30_Oct_2014.pdf
Preprint
Download (950kB)| Preview

Abstract

Overlapping tracks were processed by melting preplaced titanium carbide (TiC) powder on steel surfaces using a tungsten inert gas torch. The tracks produced ~1.0 mm melt depth free from cracks, but occasional pores were observed. The microstructure consisted of unmelted and partially melted TiC particulates together with reprecipitated TiC particles, which were prominent in tracks processed in the initial stage. A greater number of reprecipitated globular and cubic TiC particles were observed in tracks processed in the later stages, indicating more dissolution of TiC particulates from the overlapping operation. Those multitracks processed in the initial stage developed a maximum hardness of 850-1000 HV, which was lower in most other tracks, although comparable hardness values were recorded in the last track.

CORE (COnnecting REpositories)