Parametric finite-element studies on the effect of tool shape in friction stir welding

Li, H. and Mackenzie, D. and Hamilton, R. (2010) Parametric finite-element studies on the effect of tool shape in friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (8). pp. 1161-1173. ISSN 2041-2975 (https://doi.org/10.1243/09544054JEM1810)

[thumbnail of strathprints027456.pdf]
Preview
 PDF. Filename: strathprints027456.pdf
Final Published Version
Download (1MB)| Preview

Abstract

The success of the Friction Stir Welding (FSW) process, and the weld quality produced, depends significantly on the design of the welding tool. In this paper the effect of variation in various tool geometry parameters on FSW process outcomes, during the plunge stage, were investigated. Specifically the tool shoulder surface angle and the ratio of the shoulder radius to pin radius on tool reaction force, tool torque, heat generation, temperature distribution and size of the weld zone were investigated. The studies were carried out numerically using the finite element method. The welding process used AA2024 aluminium alloy plates with a thickness of 3 mm. It was found that, in plunge stage, the larger the pin radius the higher force and torque the tool experiences and the greater heat generated. It is also found that the shoulder angle has very little effect on energy dissipation as well as little effect on temperature distribution.

ORCID iDs

Li, H., Mackenzie, D. ORCID logoORCID: https://orcid.org/0000-0002-1824-1684 and Hamilton, R. ORCID logoORCID: https://orcid.org/0000-0002-3504-9774;
CORE (COnnecting REpositories)