Browse by Journal or other publication

Article

Orfeo, Alessandra and Tubaldi, Enrico and Muhr, Alan H. (2023) Mechanical behaviour of rubber blocks. International Journal of Solids and Structures, 271-272. 112259. ISSN 0020-7683

Davey, Keith and Bylya, Olga and Krishnamurthy, Bhaskaran (2020) Exact and inexact scaled models for hot forging. International Journal of Solids and Structures, 203. pp. 110-130. ISSN 0020-7683

Sancho, A. and Cox, M.J. and Cartwright, T. and Davies, C.M. and Hooper, P.A. and Dear, J.P. (2019) An experimental methodology to characterise post-necking behaviour and quantify ductile damage accumulation in isotropic materials. International Journal of Solids and Structures, 176-177. pp. 191-206. ISSN 0020-7683

Quintero, Hanna and Mehmanparast, Ali (2016) Prediction of creep crack initiation behaviour in 316H stainless steel using stress dependent creep ductility. International Journal of Solids and Structures, 97-98. pp. 101-115. ISSN 0020-7683

Diyaroglu, C. and Oterkus, E. and Oterkus, S. and Madenci, E. (2015) Peridynamics for bending of beams and plates with transverse shear deformation. International Journal of Solids and Structures, 69-70. pp. 152-168. ISSN 0020-7683

Wheel, M.A. and Frame, J.C. and Riches, P.E. (2015) Is smaller always stiffer? On size effects in supposedly generalized continua. International Journal of Solids and Structures, 67-68. pp. 84-92. ISSN 0020-7683

Raju, Gangadharan and Wu, Zhangming and Weaver, Paul M. (2015) Buckling and postbuckling of variable angle tow composite plates under in-plane shear loading. International Journal of Solids and Structures, 58. pp. 270-287. ISSN 0020-7683

Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M. (2013) Postbuckling analysis of variable angle tow (VAT) composite plates. International Journal of Solids and Structures, 50 (10). pp. 1770-1780. ISSN 0020-7683

Beveridge, Andrew James and Wheel, Marcus and Nash, David (2013) The micropolar elastic behaviour of model macroscopically heterogeneous materials. International Journal of Solids and Structures, 50 (1). 246–255. ISSN 0020-7683

Yin, Zhen-Yu and Chang, Ching and Karstunen, Minna and Hicher, Pierre-Yves (2010) An anisotropic elastic-viscoplastic model for soft clays. International Journal of Solids and Structures, 47 (5). pp. 665-677. ISSN 0020-7683

You, I. H and Lutz, W. and Gerger, H. and Amir, Muhammad and Brendel, A. and Schmauder, Siegfried (2009) Dynamic fiber push-out study of a copper matrix composite: experiment and simulation based on cohesive finite elements. International Journal of Solids and Structures, 46. pp. 4277-4286. ISSN 0020-7683

Yin, X.C. and Qin, Y and Zhou, H (2007) Transient responses of repeated impact of a beam against a stop. International Journal of Solids and Structures, 44 (22-23). 7323–7339. ISSN 0020-7683

Chen, H. F. and Ponter, Alan R.S. and Specchia, G. and Ciavarella, M. (2006) Shakedown analysis for rolling and sliding contact problems. International Journal of Solids and Structures, 43 (14-15). pp. 4201-4219. ISSN 0020-7683

Abid, Muhammad and Nash, David (2006) Structural strength: gasketed Vs non-gasketed flange joint under bolt up and operating condition. International Journal of Solids and Structures, 43 (14-15). pp. 4616-4629. ISSN 0020-7683

Oterkus, Erkan and Barut, Atila and Madenci, Erdogan and Smeltzer, Stanley and Ambur, Damodar (2006) Bonded lap joints of composite laminates with tapered edges. International Journal of Solids and Structures, 43 (6). pp. 1459-1489. ISSN 0020-7683

Oterkus, Erkan and Barut, Atila and Madenci, Erdogan and Smeltzer, Stanley (2005) Nonlinear analysis of a composite panel with a cutout repaired by a bonded tapered composite patch. International Journal of Solids and Structures, 42 (18-19). pp. 5274-5306. ISSN 0020-7683