Browse by Journal or other publication

Sang, Guijie and Lunn, Rebecca J. and El Mountassir, Grainne and Minto, James M. and McLachlan, Erica and Bradley, David and Henderson, Kenneth (2024) Improving non-uniform gravelly sand using microbially induced carbonate precipitation : an outdoor cubic-meter scale trial by engineering contractors. Engineering Geology. 107791. ISSN 0013-7952

Coppola, Lucia and Reder, Alfredo and Rianna, Guido and Tarantino, Alessandro and Pagano, Luca (2024) Effects of Wooden Embers Cover on thermo-hydrological response of silty volcanic cover and implications to post-wildfire slope stability. Engineering Geology, 341. 107724. ISSN 0013-7952

Sang, Guijie and Lunn, Rebecca J. and El Mountassir, Grainne and Minto, James M. (2023) Meter-scale MICP improvement of medium graded very gravelly sands : lab measurement, transport modelling, mechanical and microstructural analysis. Engineering Geology, 324. 107275. ISSN 0013-7952

Coppola, L. and Reder, A. and Tarantino, A. and Mannara, G. and Pagano, L. (2022) Pre-failure suction-induced deformation to inform early warning of shallow landslides : proof of concept at slope model scale. Engineering Geology, 309. 106834. ISSN 0013-7952

de Oliveira Kühn, Vinícius and De Carvalho Faria Lima Lopes, Bruna and Caicedo, Bernardo and Porfirio Cordão-Neto, Manoel (2022) Mechanical behaviour of bimodal kaolin clay with aggregates. Engineering Geology, 297. 106490. ISSN 0013-7952

de Oliveira Kühn, Vinícius and De Carvalho Faria Lima Lopes, Bruna and Caicedo, Bernardo and Porfírio Cordão-Neto, Manoel (2021) Micro-structural and volumetric behaviour of bimodal artificial soils with aggregates. Engineering Geology, 288. 106139. ISSN 0013-7952

Yfantis, G. and Pytharouli, S. and Lunn, R.J. and Carvajal, H.E.M. (2021) Microseismic monitoring illuminates phases of slope failure in soft soils. Engineering Geology, 280. 105940. ISSN 0013-7952

Yfantis, G. and Pytharouli, S. and Lunn, R.J. and Carvajal, H.E.M. (2020) Determination of the seismic signatures of landslides in soft soils : a methodology based on a field scale shear box. Engineering Geology, 279. 105853. ISSN 0013-7952

Pedrotti, Matteo and Wong, Christopher and El Mountassir, Gráinne and Renshaw, Joanna C. and Lunn, Rebecca J. (2020) Desiccation behaviour of colloidal silica grouted sand : a new material for the creation of near surface hydraulic barriers. Engineering Geology, 270. 105579. ISSN 0013-7952

Wong, Christopher and Pedrotti, Matteo and El Mountassir, Grainne and Lunn, Rebecca J. (2018) A study on the mechanical interaction between soil and colloidal silica gel for ground improvement. Engineering Geology, 243. pp. 84-100. ISSN 0013-7952

Tziavou, O. and Pytharouli, S. and Souter, J. (2018) Unmanned Aerial Vehicle (UAV) based mapping in engineering geological surveys : considerations for optimum results. Engineering Geology, 232. pp. 12-21. ISSN 0013-7952

Oterkus, Selda and Madenci, Erdogan and Oterkus, Erkan (2017) Fully coupled poroelastic peridynamic formulation for fluid-filled fractures. Engineering Geology, 225. pp. 19-28. ISSN 0013-7952

Salifu, Emmanuel and MacLachlan, Erica and Iyer, Kannan R. and Knapp, Charles W. and Tarantino, Alessandro (2016) Application of microbially induced calcite precipitation in erosion mitigation and stabilization of sandy soil foreshore slopes : a preliminary investigation. Engineering Geology, 201. pp. 96-105. ISSN 0013-7952

Hall, Christopher and Hamilton, Andrea (2016) Discussion of "Predicting water permeability in sedimentary rocks from capillary imbibition and pore structure" by D. Benavente et al., Engineering Geology (2015) [doi: 10.1016/j.enggeo.2015.06.003]. Engineering Geology, 204. pp. 121-122. ISSN 0013-7952

D'Onza, F. and Wheeler, S. J. and Gallipoli, D. and Barrera Bucio, M. and Hofmann, M. and Lloret-Cabot, M. and Lloret Morancho, A. and Mancuso, C. and Pereira, J. M. and Romero Morales, E. and Sánchez, M. and Sołowski, W. and Tarantino, A. and Toll, D. G. and Vassallo, R. (2015) Benchmarking selection of parameter values for the Barcelona basic model. Engineering Geology, 196. pp. 99-118. ISSN 0013-7952

El Mountassir, Grainne and Sanchez, Marcelo and Romero, Enrique (2014) An experimental study on the compaction and collapsible behaviour of a flood defence embankment fill. Engineering Geology, 179. pp. 132-145. ISSN 0013-7952

Stanier, Samuel A and Tarantino, Alessandro (2013) An approach for predicting the stability of vertical cuts in cohesionless soils above the water table. Engineering Geology, 158. pp. 98-108. ISSN 0013-7952

Tarantino, Alessandro and El Mountassir, Grainne (2013) Making unsaturated soil mechanics accessible for engineers : preliminary hydraulic-mechanical characterisation and stability assessment. Engineering Geology, 165. pp. 89-104. ISSN 0013-7952

Weidmann, T. and Lenzen, M. and Barratt, P.J. and Turner, K. (2007) Examining the global impact of regional consumption activities - part 2: review of input-output models for the assessment of environmental impacts embodied in trade. Engineering Geology, 61 (1). pp. 15-26. ISSN 0013-7952

Dyer, M. (2006) Full-scale stimulation of reductive dechlorination using the LINER technique. Engineering Geology, 85 (1/2). pp. 39-45. ISSN 0013-7952

Dyer, M. (2003) Field investigation into the biodegradation of TCE and BTEX at a former metal plating works. Engineering Geology, 70 (3-4). pp. 321-329. ISSN 0013-7952

Dyer, M. and van Heiningen, E. and Gerritse, J. (2003) A field trial for in-situ bioremediation of 1,2-DCA. Engineering Geology, 70 (4). pp. 315-320. ISSN 0013-7952