An investigation on the potential of utilizing aluminum alloys in the production and storage of hydrogen gas
Reda, Reham and Ashraf, Amir and Magdy, Islam and Ragab, Mohamed and Eldabaa, Nada and Abo Elmagd, Manar and Abdelhafiz, Mohamed and El-Banna, Osama and Fouad, Amr and Aly, Hayam A. and Tlija, Mehdi and Soliman, Ahmed T. and Elsayed, Ahmed and Elshaghoul, Yousef G. Y. (2024) An investigation on the potential of utilizing aluminum alloys in the production and storage of hydrogen gas. Materials, 17 (16). 4032. ISSN 1996-1944 (https://doi.org/10.3390/ma17164032)
Preview |
Text.
Filename: Reda-etal-Materials-2024-An-investigation-on-the-potential-of-utilizing-aluminum-alloys.pdf
Final Published Version License: ![]() Download (6MB)| Preview |
Abstract
The interest in hydrogen is rapidly expanding because of rising greenhouse gas emissions and the depletion of fossil resources. The current work focuses on employing affordable Al alloys for hydrogen production and storage to identify the most efficient alloy that performs best in each situation. In the first part of this work, hydrogen was generated from water electrolysis. The Al alloys that are being examined as electrodes in a water electrolyzer are 1050-T0, 5052-T0, 6061-T0, 6061-T6, 7075-T0, 7075-T6, and 7075-T7. The flow rate of hydrogen produced, energy consumption, and electrolyzer efficiency were measured at a constant voltage of 9 volts to identify the Al alloy that produces a greater hydrogen flow rate at higher process efficiency. The influence of the electrode surface area and water electrolysis temperature were also studied. The second part of this study examines these Al alloys’ resistance to hydrogen embrittlement for applications involving compressed hydrogen gas storage, whether they are utilized as the primary vessel in Type 1 pressure vessels or as liners in Type 2 or Type 3 pressure vessels. Al alloys underwent electrochemical charging by hydrogen and Charpy impact testing, after which a scanning electron microscope (SEM) was used to investigate the fracture surfaces of both uncharged and H-charged specimens. The structural constituents of the studied alloys were examined using X-ray diffraction analysis and were correlated to the alloys’ performance. Sensitivity analysis revealed that the water electrolysis temperature, electrode surface area, and electrode material type ranked from the highest to lowest in terms of their influence on improving the efficiency of the hydrogen production process. The 6061-T0 Al alloy demonstrated the best performance in both hydrogen production and storage applications at a reasonable material cost.
-
-
Item type: Article ID code: 90330 Dates: DateEvent14 August 2024Published11 August 2024AcceptedSubjects:
Technology > ManufacturesDepartment: Faculty of Engineering > Design, Manufacture and Engineering Management > National Manufacturing Institute Scotland Depositing user: Pure Administrator Date deposited: 23 Aug 2024 12:10 Last modified: 27 Aug 2024 00:55 URI: https://strathprints.strath.ac.uk/id/eprint/90330