Flashover of smooth and knurled dielectric surfaces in dry air

Macpherson, R.W. and Wilson, M.P. and Timoshkin, I.V. and Given, M.J. and MacGregor, S.J. (2024) Flashover of smooth and knurled dielectric surfaces in dry air. IEEE Transactions on Dielectrics and Electrical Insulation, 31 (1). pp. 204-211. ISSN 1070-9878 (https://doi.org/10.1109/TDEI.2023.3313571)

[thumbnail of Macpherson-etal-IEEETDEI-2023-Flashover-of-smooth-and-knurled-dielectric-surfaces-in-dry-air]
Preview
 Text. Filename: Macpherson_etal_IEEETDEI_2023_Flashover_of_smooth_and_knurled_dielectric_surfaces_in_dry_air.pdf
Final Published Version
License: Strathprints license 1.0
Download (1MB)| Preview

Abstract

In pulsed power engineering, solid spacers are used to insulate high-voltage parts from extraneous metal parts, providing electrical insulation as well as mechanical support. The breakdown/flashover voltage, at which a discharge process initiates across the solid/air interface, is important in the design process, as it informs designers of specific threshold 'failure' voltages of the insulation system. In this article, a method to potentially increase the failure voltage, tested under multiple environmental conditions, without increasing the length of the solid spacer, was investigated. Three dielectric materials: high-density polyethylene (HDPE), Ultem (polyetherimide), and Delrin (polyoxymethylene), were tested under a 100/700 ns impulse voltage. Cylindrical spacers made of these materials were located in the center of a plane-parallel electrode arrangement in the air, which provided a quasi-uniform electric field distribution. Breakdown tests were performed in a sealed container at air pressures of -0.5, 0, and 0.5 bar gauge, with a relative humidity (RH) level of < 10%. The materials were tested under both, negative and positive polarity impulses. The surfaces of a set of solid spacers were subjected to a 'knurled' finish, where ∼ 0.5 mm indentations are added to the surface of the materials, prior to testing, to allow comparison with the breakdown voltages for samples with 'smooth' (machined) surface finishes. The results show that the flashover voltage can be increased by the addition of a spacer with a knurled surface, by up to 60 kV under certain conditions, in comparison to a 'smooth' (machined) surface finish.

ORCID iDs

Macpherson, R.W. ORCID logoORCID: https://orcid.org/0000-0002-0264-6943, Wilson, M.P. ORCID logoORCID: https://orcid.org/0000-0003-3088-8541, Timoshkin, I.V. ORCID logoORCID: https://orcid.org/0000-0002-0380-9003, Given, M.J. ORCID logoORCID: https://orcid.org/0000-0002-6354-2486 and MacGregor, S.J. ORCID logoORCID: https://orcid.org/0000-0002-0808-585X;
  • Item type:Article
    ID code:87010
    Dates:
    Date
    Event
    1 February 2024
    Published
    11 September 2023
    Accepted
    Notes:Copyright © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
    Subjects:Technology > Electrical engineering. Electronics Nuclear engineering > Electrical apparatus and materials
    Department:Faculty of Engineering > Electronic and Electrical Engineering
    Depositing user: Pure Administrator
    Date deposited:19 Oct 2023 15:06
    Last modified:21 Nov 2024 01:24
    URI:https://strathprints.strath.ac.uk/id/eprint/87010
CORE (COnnecting REpositories)