Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocity

Duernberger, Euan and MacLeod, Charles Norman and Lines, Dave (2023) Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocity. Composites Part B: Engineering, 254. 110577. ISSN 1359-8368 (https://doi.org/10.1016/j.compositesb.2023.110577)

[thumbnail of Duernberger-etal-CPBE-2023-Fibre-volume-fraction-screening-of-pultruded-carbon-fibre-reinforced-polymer-panels]
Preview
 Text. Filename: Duernberger_etal_CPBE_2023_Fibre_volume_fraction_screening_of_pultruded_carbon_fibre_reinforced_polymer_panels.pdf
Final Published Version
License: Creative Commons Attribution 4.0 logo
Download (5MB)| Preview

Abstract

Composites have become the material of choice in a wide range of manufacturing applications. Whilst ultrasound inspection is a well-established non-destructive testing (NDT) technique, the application to composite imaging presents significant challenges stemming from the inherent anisotropy of the material. The fibre-volume fraction (FVF) of a composite plays a key role in determining the final strength and stiffness of a part as well as influencing the ultrasonic bulk velocity. In this work, a novel FVF determination technique, based on the angular dependence of the sound velocity with respect to the composite fibre direction, is presented. This method is introduced and validated by inspection of pultruded carbon fibre reinforced polymer (CFRP) panels commonly used in the manufacture of high-power wind turbine blades. Full matrix capture (FMC) data acquired from a phased array (PA) ultrasonic probe is used to generate calibration data for samples ranging in FVF from 60.5 % to 69.9 %. Sample velocity, as a function of propagation angle, is used to estimate the FVF of samples and ensure they fall within the desired range. Experimental results show values of 61.1, 66.1 and 68.3 %, comparing favourably to the known values of 60.5, 66.3 and 69.9 % respectively. The work offers significant potential in terms of factory implementation of NDT procedures to ensure final parts satisfy standards and certification by ensuring any FVF inconsistencies are identified as early in the manufacturing process as possible.

CORE (COnnecting REpositories)