Mapping the effects of slurry concentration, velocity and electrochemical potential on the erosion-corrosion of WC/Co-Cr thermally sprayed coatings

Stack, M.M. and Abd El-Badia, T.M.; (2006) Mapping the effects of slurry concentration, velocity and electrochemical potential on the erosion-corrosion of WC/Co-Cr thermally sprayed coatings. In: Proceedings of the 12th Nordic Symposium on Tribology. DTU, Department of Mechanical Engineering, Lulea University of Technology, DNK. ISBN 87-90416-19-8

Full text not available in this repository.Request a copy

Abstract

At low slurry velocities, as compared to the unreinforced alloy, the erosion-corrosion resistance of the composite was improved because of increase in hardness as a result of whisker addition. However, steady-state erosion-corrosion rate was found to increase with the addition of whisker to the matrix alloy at high slurry velocities. The erosion-corrosion rates of materials in the saline slurry were much higher than those in the water slurry even though the corrosion components were very small.

ORCID iDs

Stack, M.M. ORCID logoORCID: https://orcid.org/0000-0001-6535-6014 and Abd El-Badia, T.M.;
CORE (COnnecting REpositories)