Turboelectric distributed propulsion protection system design trades

Tools

Ross, C. and Armstrong, M. and Blackwelder, M. and Jones, C. and Norman, P. and Fletcher, S. (2014) Turboelectric distributed propulsion protection system design trades. In: SAE ASTC, 2014-09-23 - 2014-09-25, Ohio. (https://doi.org/10.4271/2014-01-2141)

[thumbnail of Ross-etal-SAE2014-turboelectric-distributed-propulsion-protection-system-design-trades]
Preview
 Text. Filename: Ross_etal_SAE2014_turboelectric_distributed_propulsion_protection_system_design_trades.pdf
Accepted Author Manuscript
Download (899kB)| Preview

Abstract

The NASA N3-X blended-wing body with turboelectric distributed propulsion concept is being studied to achieve N+3 goals such as reduced noise, emissions, and improved energy efficiency. The electrical distribution system is cryogenic in order to maximize its efficiency and increase the power density of all associated components, while the motors, generators, and transmission lines are superconducting. The protection of a superconducting DC network poses unique electrical and thermal challenges due to the low impedance of the superconductor and operation in the superconducting or quenched states. For a given TeDP electrical system architecture with fixed power ratings, conventional and solid-state circuit breakers combined with superconducting fault-current limiters are examined with both voltage and current source control to limit and interrupt the fault current. To estimate the protection system weight and losses, scalable models of cryogenic bidirectional current-source converters, cryogenic bidirectional IGBT solid-state circuit breakers, and resistive-type superconducting fault current limiters are developed to assess how the weight and losses of these components vary as a function of nominal voltage and current and fault current ratings. The scalable models are used to assess the protection system weight for several trade-offs. System studies include the trade-off in fault-current limiting capability of SFCL on CB mass, alongside the fault-current limiting capability of the converter and its impact on CB fault-current interruption ratings and weight.

ORCID iDs

Ross, C., Armstrong, M., Blackwelder, M., Jones, C. ORCID logoORCID: https://orcid.org/0000-0001-7524-5756, Norman, P. ORCID logoORCID: https://orcid.org/0000-0001-5577-1281 and Fletcher, S. ORCID logoORCID: https://orcid.org/0000-0002-3510-9271;
CORE (COnnecting REpositories)