Investigation into grindability of a superalloy and effects of grinding parameters on its surface integrity

Zeng, Quanren and Liu, Geng and Liu, Lan and Qin, Yi (2015) Investigation into grindability of a superalloy and effects of grinding parameters on its surface integrity. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (2). pp. 238-250. ISSN 2041-2975 (https://doi.org/10.1177/0954405414526384)

[thumbnail of Zeng-etal-JEM2014-grindability-of-a-superalloy]
Preview
 PDF. Filename: Zeng_etal_JEM2014_grindability_of_a_superalloy.pdf
Accepted Author Manuscript
Download (1MB)| Preview

Abstract

GH4169 is comparatively a new superalloy mainly used as turbine components because of its outstanding combination properties such as high-temperature strength, thermal stability and wear resistance. But these also make it hard to cut, and its machined surface quality and integrity are particularly sensitive to the manufacturing process employed. The existing researches on machining-induced surface integrity and machinability of hard-to-cut materials are briefly reviewed; the effects of processing parameters on surface integrity for GH4169 components are studied in detail via orthogonal-designed external grinding experiment. The single-factorial plain grinding experiment was designed to further investigate the influence of depth of cut on the surface integrity characteristics. The surface roughness, residual stress distribution, microhardness profile and microstructural alteration within the subsurface were obtained and analyzed. It was shown that the surface integrity is susceptible to the magnitude of depth of cut, and the components ground with low depth of cut are of more acceptable surface quality with less variation in residual stress and microhardness within the machining-affected layer than those obtained with high depth of cut. No severe microstructural alteration or adverse surface cracking was discerned when the depth of cut is reasonably set.

CORE (COnnecting REpositories)