On creep-fatigue endurance of TIG-dressed weldments using the linear matching method
Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307 (https://doi.org/10.1016/j.engfailanal.2013.08.009)
Preview |
Text.
Filename: Gorash_Y_Chen_HF_Pure_On_creep_fatigue_endurance_of_TIG_dressed_weldments_using_the_linear_matching_method_Aug_2013.pdf
Accepted Author Manuscript License: Download (1MB)| Preview |
Abstract
This paper is devoted to parametric study on creep-fatigue endurance of the steel type 316N(L) weldments at 550◦C identified as type 3 according to R5 Vol. 2/3 procedure classification. The study is implemented using a direct method known as the Linear Matching Method (LMM) and based upon the creep-fatigue evaluation procedure considering time fraction rule for creep-damage assessment. Seven configurations of the weldment, characterised by particular values of a geometrical parameter ρ, are proposed. Parameter ρ, which represents different grades of TIG dressing, is a ratio between the radius of the fillet of the remelted metal on a weld toe and the thickness of welded plates. For each configuration, the total number of cycles to failure N⋆ in creep-fatigue conditions is assessed numerically for different loading cases defined by normalised bending moment ˜M and dwell period t. The obtained set of N⋆ is extrapolated by the analytic function dependent on ˜M, t and parameter ρ. Proposed function for N⋆ shows good agreement with numerical results obtained by the LMM. Therefore, it is used for the identification of Fatigue Strength Reduction Factors (FSRFs) effected by creep, which are intended for design purposes, and dependent on t and ρ.
ORCID iDs
Gorash, Yevgen ORCID: https://orcid.org/0000-0003-2802-7814 and Chen, Haofeng ORCID: https://orcid.org/0000-0001-6864-4927;-
-
Item type: Article ID code: 44578 Dates: DateEvent1 December 2013PublishedSubjects: Technology > Mechanical engineering and machinery
Technology > Mining engineering. MetallurgyDepartment: Faculty of Engineering > Mechanical and Aerospace Engineering Depositing user: Pure Administrator Date deposited: 27 Aug 2013 11:41 Last modified: 11 Nov 2024 10:28 URI: https://strathprints.strath.ac.uk/id/eprint/44578