Electrical, spectral and optical performance of yellow-green and amber micro-pixelated InGaN light-emitting diodes

Gong, Zheng and Liu, N.Y. and Tao, Y.B. and Massoubre, David and Xie, E.Y and Hu, X.D. and Chen, Z.Z. and Zhang, G.Y. and Pan, Y.B. and Hao, M.S. and Watson, Ian and Gu, Erdan and Dawson, Martin (2012) Electrical, spectral and optical performance of yellow-green and amber micro-pixelated InGaN light-emitting diodes. Semiconductor Science and Technology, 27 (1). 015003. ISSN 0268-1242 (https://doi.org/10.1088/0268-1242/27/1/015003)

Full text not available in this repository.Request a copy

Abstract

Micro-pixelated InGaN LED arrays operating at 560 and 600 nm, respectively, are demonstrated for what the authors believe to be the first time. Such devices offer applications in areas including bioinstrumentation, visible light communications and optoelectronic tweezers. The devices reported are based on new epitaxial structures, retaining conventional (0 0 0 1) orientation, but incorporating electron reservoir layers which enhance the efficiency of radiative combination in the active regions. A measured output optical power density up to 8 W cm−2 (4.4 W cm−2) has been achieved from a representative pixel of the yellow–green (amber) LED array, substantially higher than that from conventional broad-area reference LEDs fabricated from the same wafer material. Furthermore, these micro-LEDs can sustain a high current density, up to 4.5 kA cm−2, before thermal rollover. A significant blueshift of the emission wavelength with increasing injection current is observed, however. This blueshift saturates at 45 nm (50 nm) for the yellow–green (amber) LED array, and numerical simulations have been used to gain insight into the responsible mechanisms in this microstructured format of device. In the relatively low-current-density regime (<3.5 kA cm−2) the blueshift is attributable to both the screening of the piezoelectric field by the injected carriers and the band-filling effect, whereas in the high-current regime, it is mainly due to band-filling. Further development of the epitaxial wafer material is expected to improve the current-dependent spectral stability.

ORCID iDs

Gong, Zheng, Liu, N.Y., Tao, Y.B., Massoubre, David, Xie, E.Y, Hu, X.D., Chen, Z.Z., Zhang, G.Y., Pan, Y.B., Hao, M.S., Watson, Ian ORCID logoORCID: https://orcid.org/0000-0002-8797-3993, Gu, Erdan ORCID logoORCID: https://orcid.org/0000-0002-7607-9902 and Dawson, Martin ORCID logoORCID: https://orcid.org/0000-0002-6639-2989;