High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness

Tools

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409

Full text not available in this repository.Request a copy

Abstract

The effects of pre-oxidation of Incoloy 8OOH and Inconel 738 as a Possible protective measure in reducing erosion-corrosion of the underlying alloy at temperatures up to 700-degrees-C have been investigated under conditions of moderate particle velocities and high particle loadings. This research also included assessment of the variation of erosion-corrosion with impact angle and alloy hot hardness. The results showed that the pre-formed scale exerted negligible effect on the erosion-corrosion of the substrate under these conditions. There were no significant differences between the wastage rates of the pre-oxidized and the as received alloys as the temperature was increased. The variation of erosion rate with impact angle followed the classical ductile mode at high temperatures. The reasons why preoxidation is ineffective under these conditions are discussed in terms of existing knowledge of erosion-corrosion in similar conditions.

ORCID iDs

Stack, Margaret ORCID logoORCID: https://orcid.org/0000-0001-6535-6014, Stott, F.H. and Wood, G.C.;
CORE (COnnecting REpositories)