The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene
Yang, Liu and Thomason, James and Zhu, W.Z. (2011) The influence of thermo-oxidative degredation on the measured interface strength of glass fibre-polypropylene. Composites Part A: Applied Science and Manufacturing, 42 (10). pp. 1293-1300. ISSN 1359-835X (https://doi.org/10.1016/j.compositesa.2011.05.011)
Microsoft Word.
Filename: Thomason_JL_Pure_The_influence_of_thermo_oxidative_degredation_on_the_measured_interface_strength_of_glass_fibre_polypropylene_May_2011.doc
Preprint Download (426kB) |
Abstract
It has previously been found that thermal-oxidative degradation of the matrix can strongly affect the apparent interfacial shear strength (IFSS) in glass fibre-polypropylene (GF-PP) measured using the microbond method. In this work, different approaches were employed to further investigate this phenomenon. Hot-stage microscopy was used to establish a profile for dimensional loss of molten PP microdroplets during heat treatment. Under a given thermal load this reduction was found to be related to the initial droplet dimensions. A nanoindentation test was employed to directly probe the mechanical properties of the PP microdroplets, which also exhibited strong dimensional dependence in terms of property deterioration caused by the degradation. Characterisation of thermal mechanical properties and crystallinity was carried out on macroscopic PP samples to assist in elucidating how the polymer degradation affected the measured IFSS. Comparison of the degraded and non-degraded PP microbond samples for IFSS clearly showed the effect of thermal-oxidative degradation on adhesion.
ORCID iDs
Yang, Liu ORCID: https://orcid.org/0000-0001-8475-1757, Thomason, James ORCID: https://orcid.org/0000-0003-0868-3793 and Zhu, W.Z.;-
-
Item type: Article ID code: 29294 Dates: DateEventOctober 2011Published19 May 2011Published OnlineNotes: Impact Factor 2.410, Half-Life 5.2 Subjects: Technology > Mechanical engineering and machinery
Technology > Chemical engineeringDepartment: Faculty of Engineering > Mechanical and Aerospace Engineering Depositing user: Pure Administrator Date deposited: 07 Mar 2011 23:29 Last modified: 30 Nov 2024 01:04 URI: https://strathprints.strath.ac.uk/id/eprint/29294