Browse by Author or creator

Article

Kwame, JS and Yakushina, E and Blackwell, P (2021) Influence of longitudinal scratch defects on the bendability of titanium alloy. Journal of Material Sciences & Manufacturing Research, 2 (2). pp. 1-4.

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Prediction of hole expansion ratio of titanium alloys using R programming. Journal of Modeling and Optimization, 12 (2). pp. 125-137. ISSN 1759-7676

Allazadeh, M. R. and Baker, A. and Kwame, J. S. (2020) Investigating the edge forming performance of DP600 and FV 607. European Journal of Scientific Exploration, 3 (2). pp. 20-29. 3. ISSN 2616-5171

Kwame, J. S. and Yakushina, E. and Blackwell, P. (2020) Impact of machining induced surface defects on the edge formability of commercially pure titanium sheet at room temperature. SN Applied Sciences, 2. 1999. ISSN 2523-3971

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Influence of sheet conditions on in-plane strain evolution via ex-situ tensile deformation of Ti-3Al-2.5V at room temperature. Journal of Materials and Applications, 10 (1). pp. 15-26. ISSN 2051-7750

Kwame, J. S and Yakushina, E. and Blackwell, P. (2020) Effect of edge conditions on the formability of commercially pure titanium sheet (Grade 2) at room temperature. MATEC Web of Conferences, 321. 04027. ISSN 2261-236X

Kwame, J.S and Yakushina, E. and Blackwell, P. (2020) Examining failure behaviour of commercially pure titanium during tensile deformation and hole expansion test. Journal of Materials and Applications, 9 (1). pp. 32-37. ISSN 2051-7750

Mosleh, A.O and Mikhaylovskaya, A.V and Kotov, A.D and Kwame, J.S. (2019) Experimental, modelling and simulation of an approach for optimizing the superplastic forming of Ti-6%Al-4%V titanium alloy. Journal of Manufacturing Processes, 45. pp. 262-272. ISSN 1526-6125

Mosleh, A O and Mikhaylovskaya, A V and Kotov, A D and Sitkina, M and Mestre-Rinn, P and Kwame, J S (2019) Superplastic deformation behavior of ultra-fine-grained Ti-1V-4Al-3Mo alloy : constitutive modeling and processing map. Materials Research Express, 6 (9). pp. 1-9. 9. ISSN 2053-1591

Mosleh, Ahmed O. and Mikhaylovskaya, Anastasia V. and Kotov, Anton D. and Kwame, James S. and Aksenov, Sergey A. (2019) Superplasticity of Ti-6Al-4V titanium alloy : microstructure evolution and constitutive modelling. Materials, 12 (11). 1756. ISSN 1996-1944

Mikhaylovskaya, A.V and Mosleh, A.O and Kotov, A.D and Kwame, J.S. and Pourcelot, T. and Golovin, I.S and Portnoy, V.K (2017) Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy. Materials Science and Engineering: A, 708. pp. 469-477. ISSN 0921-5093

Mosleh, Ahmed and Mikhaylovskaya, Anastasia and Kotov, Anton and Pourcelot, Theo and Aksenov, Sergey and Kwame, James and Portnoy, Vladimir (2017) Modelling of the superplastic deformation of the near-a titanium alloy (Ti-2.5AL-1.8MN) using arrhenius-type constitutive model and artificial neural network. Metals, 7 (12). 568. ISSN 0379-6779

Book Section

Kwame, J. S. and Yakushina, E. and Blackwell, P.; Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori, eds. (2021) Effect of machining induced microstructure changes on the edge formability of titanium alloys at room temperature. In: Forming the Future. The Minerals, Metals & Materials Series . Springer, USA, pp. 2695-2704. ISBN 9783030753818