Online split-phase identification of asymmetric parameters between distribution lines and ground for unbalanced voltage compensation based on power electronics

Guo, Moufa and Jiao, Yaohui and Zheng, Zeyin and Zhang, Binlong and Lin, Jiahao and Hong, Qiteng (2024) Online split-phase identification of asymmetric parameters between distribution lines and ground for unbalanced voltage compensation based on power electronics. IEEE Transactions on Power Electronics, 39 (8). pp. 10067-10078. ISSN 0885-8993 (https://doi.org/10.1109/TPEL.2024.3396216)

[thumbnail of Guo-etal-IEEE-TPE-2024-Online-split-phase-identification-of-asymmetric-parameters-between-distribution-lines-and-ground]
Preview
 Text. Filename: Guo-etal-IEEE-TPE-2024-Online-split-phase-identification-of-asymmetric-parameters-between-distribution-lines-and-ground.pdf
Accepted Author Manuscript
License: Strathprints license 1.0
Download (1MB)| Preview

Abstract

Most of the phase-to-ground parameters induced between distribution lines and ground are asymmetric, which can result in the generation of unbalanced voltage, shifting the neutral point voltage. For compensated distribution networks, the existence of an arc suppression coil can increase the influence of asymmetric parameters and exacerbate the deviation of neutral point voltage. Maintaining the balance of three-phase voltage is not only a prerequisite for the stable operation of the distribution networks, but also for improving the reliability of single-phase ground fault detection. This paper proposes a novel online split-phase identification of asymmetric parameters between distribution lines and ground for unbalanced voltage compensation based on power electronics. Firstly, an adaptive active current-type compensation method based on power electronics is proposed, it can adapt to compensate for threephase unbalanced voltage with different neutral point grounding styles. Secondly, particle swarm optimization is used to realize the online split-phase identification of the phase-to-ground parameters of the distribution power lines. The identified parameters are used to calculate the reference value of the compensation current and the asymmetry of each phase-toground parameter. Finally, the feasibility and effectiveness of the proposed method are verified by simulation and experiment.

ORCID iDs

Guo, Moufa, Jiao, Yaohui, Zheng, Zeyin, Zhang, Binlong, Lin, Jiahao and Hong, Qiteng ORCID logoORCID: https://orcid.org/0000-0001-9122-1981;
  • Item type:Article
    ID code:89107
    Dates:
    Date
    Event
    1 August 2024
    Published
    2 May 2024
    Published Online
    28 April 2024
    Accepted
    15 December 2023
    Submitted
    Notes:© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
    Subjects:Technology > Electrical engineering. Electronics Nuclear engineering
    Department:Faculty of Engineering > Electronic and Electrical Engineering
    Depositing user: Pure Administrator
    Date deposited:03 May 2024 12:55
    Last modified:16 Nov 2024 01:27
    URI:https://strathprints.strath.ac.uk/id/eprint/89107
CORE (COnnecting REpositories)