Surface modification of self-assembled semiconductor quantum dot microlasers

Tools

Charlton, Bethan K. and Eling, Charlotte J. and Laurand, Nicolas (2022) Surface modification of self-assembled semiconductor quantum dot microlasers. In: Photon 2022, 2022-08-30 - 2022-09-02, East Midlands Conference Centre.

[thumbnail of Charlton-etal-Photon-2022-Surface-modification-of-self-assembled-semiconductor-quantum-dot-microlasers]
Preview
 Text. Filename: Charlton_etal_Photon_2022_Surface_modification_of_self_assembled_semiconductor_quantum_dot_microlasers.pdf
Accepted Author Manuscript
License: Creative Commons Attribution 4.0 logo
Download (165kB)| Preview

Abstract

Microlasers self-assembled entirely from colloidal quantum dots (CQDs) have been recently reported [1,2]. Surface functionalisation of such lasers, which has not been shown before, is essential for realising their biosensing potential. Here, we demonstrate an approach for the surface modification of self-assembled microlasers with streptavidin which can act as a platform for further functionalisation or sensing by exploiting the avidin–biotin interaction. Bottom-up self-assembly of orange-emitting CdSSe/ZnS CQDs was carried out using an oilin-water emulsion technique [1,2], yielding microspheres with an oleic acid surface that are insoluble in water. A ligand exchange with 3-mercaptopropionic acid (MPA) was carried out [3] to put a carboxylic acid group on the surface of the microspheres for the streptavidin to bind to [4]. Ligand exchange and streptavidin modification was indicated with FTIR and UVvis measurements. Microsphere size remained between 1 and 20 µm throughout the functionalisation process as measured by optical microscopy. Microspheres were optically pumped with a 355nm, 5ns pulsed Nd:YAG laser at a 10 Hz repetition rate with a beam spot area 2.6 ± 1.5 x10-5 cm². Oleate- and streptavidin-coated spheres, with diameters of 9.1 µm and 11.5 µm respectively, exhibited lasing with thresholds of 1.9 µJ and 8.7 µJ respectively. Figure 1(a) shows the threshold curve for the streptavidin-capped microsphere and Figure 1(b) shows its emission spectra above and below threshold. Lowering the threshold of the streptavidin coated microspheres to match oleate-coated spheres is required but the fact functionalised spheres can lase is promising for future applications.

ORCID iDs

Charlton, Bethan K. ORCID logoORCID: https://orcid.org/0009-0000-8484-3512, Eling, Charlotte J. ORCID logoORCID: https://orcid.org/0000-0002-3819-2728 and Laurand, Nicolas ORCID logoORCID: https://orcid.org/0000-0003-0486-4300;
CORE (COnnecting REpositories)