Comparison of single-solver FSI techniques for the Fe-prediction of a blow-off pressure for an elastomeric seal

Tools

Morrison, Niall and Gorash, Yevgen and Hamilton, Robert; Owen, Roger and de Borst, Rene and Reese, Jason and Pearce, Chris, eds. (2018) Comparison of single-solver FSI techniques for the Fe-prediction of a blow-off pressure for an elastomeric seal. In: Proceedings of the 6th European Conference on Computational Mechanics Solids, Structures and Coupled Problems, ECCM 2018 and 7th European Conference on Computational Fluid Dynamics, ECFD 2018. International Centre for Numerical Methods in Engineering, CIMNE, GBR, pp. 2099-2110. ISBN 9788494731167

[thumbnail of Morrison-etal-ECCM-2018-Comparison-of-single-solver-FSI-techniques-for-the-Fe-prediction]
Preview
 Text. Filename: Morrison_etal_ECCM_2018_Comparison_of_single_solver_FSI_techniques_for_the_Fe_prediction.pdf
Accepted Author Manuscript
Download (637kB)| Preview

Abstract

Summary: Assessment of leakage performance is a fundamental aspect in the design of elastomeric fluid seals. The key characteristic of the leakage performance is the blow-off pressure, which when it is reach, the leakage rate through the seal is no longer acceptable and the seal no longer performs its function. Prediction of the blow-off pressure under different operating conditions such as the amount of preload, pressure build-up rate, etc., would facilitate improvement in the seal design methodology and would allow subsequent efficient optimisation of a seal design. For an accurate prediction of the blow-off pressure, any computational methodology should ideally include Fluid-Structure Interaction (FSI), since the geometrical disposition of the seal, its deformation and its contact conditions with respect to the main structure are adversely affected by the fluid pressure. Two FSI single-solver techniques, available in the commercial FE-code Abaqus, are investigated in this study with application to the simulation of leakage. The first technique is Pressure Penetration Interaction, available for general structural analysis using a static implicit solver, which propagates the applied fluid pressure into contact openings. The second, more advanced FSI technique, is the Coupled Eulerian-Lagrangian (CEL) approach which is available for coupled fluid-structural analysis in a dynamic explicit solver. The CEL approach is the most versatile and can be applied to a wide range of FSI problems, e.g. simulation of a seal blow-off and fluid leakage through the resulting contact gap [1]. When trying to develop the art and science involved in the simulation of leakage phenomenon, a robust FSI technique has the potential to be a critically important design tool which could be applied to a wide range of more complex sealing geometries. This paper addresses a typical hollow rubber seal and investigates how the amount of initial compression and initial stretching affect the leak tightness of the seal using two different FSI techniques. The complexity of problem setup, the efficiency of the solver and the robustness of obtained solution will be compared and discussed.

ORCID iDs

Morrison, Niall, Gorash, Yevgen ORCID logoORCID: https://orcid.org/0000-0003-2802-7814 and Hamilton, Robert ORCID logoORCID: https://orcid.org/0000-0002-3504-9774; Owen, Roger, de Borst, Rene, Reese, Jason and Pearce, Chris
CORE (COnnecting REpositories)