Analysis of the effect of a series of back twist blade configurations for an active pitch-to-stall floating offshore wind turbine

Ward, Dawn and Collu, Maurizio and Sumner, Joy (2020) Analysis of the effect of a series of back twist blade configurations for an active pitch-to-stall floating offshore wind turbine. Journal of Offshore Mechanics and Arctic Engineering, 142 (6). 062001. ISSN 0892-7219 (https://doi.org/10.1115/1.4046567)

[thumbnail of Ward-etal-JOMAE-2020-back-twist-blade-configurations-for-an-active-pitch-to-stall-floating-offshore-wind-turbine]
Preview
 Text. Filename: Ward_etal_JOMAE_2020_back_twist_blade_configurations_for_an_active_pitch_to_stall_floating_offshore_wind_turbine.pdf
Accepted Author Manuscript
License: Creative Commons Attribution 4.0 logo
Download (669kB)| Preview

Abstract

For a turbine mounted on a floating platform, extreme induced loads can be increased by up to 1.6 times those experienced by a turbine situated on a fixed base. If these loads cannot be reduced, towers must be strengthened which will result in increased costs and weight. These tower loads would be additionally exasperated for a pitch-to-feather controlled turbine by a phenomenon generally referred to as "negative damping," if it were not avoided. Preventing negative damping from occurring on a pitch-to-feather controlled floating platform negatively affects rotor speed control and regulated power performance. However, minimizing the blade bending moment response can result in a reduction in the tower fore-aft moment response, which can increase the tower life. A variable-speed, variable pitch-to-stall (VSVP-S) floating semi-submersible wind turbine, which does not suffer from the negative damping and hence provides a more regulated power output, is presented. This incorporates a back twist blade profile such that the blade twist, starting at the root, initially twists toward stall and, at some pre-determined "initiation" point, changes direction to twist back toward feather until the tip. Wind frequency weighting was applied to the tower axial fatigue life trends of different blade profiles and a preferred blade back twist profile was identified. This had a back twist angle of -3 deg and started at 87.5% along the blade length and achieved a 5.1% increase in the tower fatigue life.

CORE (COnnecting REpositories)