Micromachining of a piezocomposite transducer using a copper vapour laser

Tools

Farlow, R. and Galbraith, W. and Knowles, M. and Hayward, G. (2001) Micromachining of a piezocomposite transducer using a copper vapour laser. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 48 (3). pp. 639-640. ISSN 0885-3010 (http://dx.doi.org/10.1109/58.920684)

Full text not available in this repository.Request a copy

Abstract

A 1-3 piezocomposite transducer with front face dimensions of 2×2 mm has been micromachined using a copper vapor laser. The device consists of PZT5A piezoceramic pillars with a 65-μm pitch suspended in a low viscosity thermosetting polymer. The kerf width is 13 μm, and the transducer thickness is 170 μm, making the device suitable for ultrasonic reception at frequencies close to 10 MHz.

ORCID iDs

Farlow, R., Galbraith, W. ORCID logoORCID: https://orcid.org/0000-0002-5620-7807, Knowles, M. and Hayward, G.;
CORE (COnnecting REpositories)