Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading

Porter, Kate E. and Ordonez-Sanchez, Stephanie E. and Murray, Robynne E. and Allmark, Matthew and Johnstone, Cameron M. and O'Doherty, Tim and Mason-Jones, Allan and Doman, Darrel A. and Pegg, Michael J. (2020) Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading. Journal of Fluids and Structures, 93. 102825. ISSN 0889-9746 (https://doi.org/10.1016/j.jfluidstructs.2019.10282...)

[thumbnail of Porter-etal-JFS-2020-Flume-testing-of-passively-adaptive-composite-tidal-turbine-blade]
Preview
 Text. Filename: Porter_etal_JFS_2020_Flume_testing_of_passively_adaptive_composite_tidal_turbine_blade.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo
Download (5MB)| Preview

Abstract

The tidal energy industry is progressing rapidly, but there are still barriers to overcome to realise the commercial potential of this sector. Large magnitude and highly variable loads caused by waves acting on the turbine are of particular concern. Composite blades within-built bend-twist elastic response may reduce these peak loads, by passively feathering with increasing thrust. This could decrease capital costs by lowering the design loads,and improve robustness through the mitigation of pitch mechanisms. In this study,the previous research is extended to examine the performance of bend-twist blades incombined wave-current flow, which will frequently be encountered in the field. A scaled 3 bladed turbine was tested in the flume at IFREMER with bend-twist composite blades and equivalent rigid blades, sequentially under current and co-directional wave-current cases. In agreement with previous research, when the turbine was operating in current alone at higher tip speed ratios the bend-twist blades reduced the mean thrust and power compared to the rigid blades. Under the specific wave-current condition tested the average loads were similar on both blade sets. Nevertheless, the bend-twist blades substantially reduced the magnitudes of the average thrust and torque fluctuations per wave cycle,by up to 10% and 14% respectively.

ORCID iDs

Porter, Kate E., Ordonez-Sanchez, Stephanie E. ORCID logoORCID: https://orcid.org/0000-0002-7253-6299, Murray, Robynne E., Allmark, Matthew, Johnstone, Cameron M. ORCID logoORCID: https://orcid.org/0000-0001-5171-1230, O'Doherty, Tim, Mason-Jones, Allan, Doman, Darrel A. and Pegg, Michael J.;
CORE (COnnecting REpositories)