Superplastic deformation behavior of ultra-fine-grained Ti-1V-4Al-3Mo alloy : constitutive modeling and processing map

Mosleh, A O and Mikhaylovskaya, A V and Kotov, A D and Sitkina, M and Mestre-Rinn, P and Kwame, J S (2019) Superplastic deformation behavior of ultra-fine-grained Ti-1V-4Al-3Mo alloy : constitutive modeling and processing map. Materials Research Express, 6 (9). pp. 1-9. 9. ISSN 2053-1591 (https://doi.org/10.1088/2053-1591/ab31f9)

[thumbnail of Mosleh-etal-MRE2019-Superplastic-deformation-behavior-of-ultra-fine-grained-Ti-1V-4Al-3Mo-alloy]
Preview
Text. Filename: Mosleh_etal_MRE2019_Superplastic_deformation_behavior_of_ultra_fine_grained_Ti_1V_4Al_3Mo_alloy.pdf
Accepted Author Manuscript

Download (846kB)| Preview

Abstract

This paper studies the superplasticity of conventional sheets of Ti-1V-4Al-3Mo (α+β) alloy. The flow behavior was investigated in a temperature range of 775 °C–900 °C and a constant strain rate range of 2×10−4–5×10−3 s−1 via uniaxial tensile tests. The microstructure evolution during the superplastic deformation was analyzed. The results revealed that, the flow behavior of Ti-1V-4Al- 3Mo (α+β) alloy is characterized by strain softening phenomena. The experimental stress-strain data were used to build a power law constitutive model. A processing map, which shows the safe and unsafe regions of deformation, was also constructed for the studied alloy. The optimal deformation regime was attained at a temperature of 875 °C and strain rate of 1×10−3 s−1 which provided a β phase fraction of 52%. Equiaxed fine-grained α and β structure with size of 2–3 μm as well as dislocation activity inside the α-grains were identified in the optimum deformation regime.