Pharmaceutical-grade oral films as substrates for printed medicine

Wimmer-Teubenbacher, M. and Planchette, C. and Pichler, H. and Markl, D. and Hsiao, W. K. and Paudel, A. and Stegemann, S. (2018) Pharmaceutical-grade oral films as substrates for printed medicine. International Journal of Pharmaceutics, 547 (1-2). pp. 169-180. ISSN 1873-3476 (https://doi.org/10.1016/j.ijpharm.2018.05.041)

[thumbnail of Wimmer-Teubenbacher-etal-IJP-2018-Pharmaceutical-grade-oral-films-as-substrates-for-printed]
Preview
 Text. Filename: Wimmer_Teubenbacher_etal_IJP_2018_Pharmaceutical_grade_oral_films_as_substrates_for_printed.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo
Download (675kB)| Preview

Abstract

In contact-less printing, such as piezo-electric drop on demand printing used in the study, the drop formation process is independent of the substrate. This means that having developed a printable formulation, printed pharmaceutical dosage forms can be obtained on any pharmaceutical grade substrate, such as polymer-based films. In this work we evaluated eight different oral films based on their suitability as printing substrates for sodium picosulfate. The different polymer films were compared regarding printed spot morphology, chemical stability and dissolution profile. The morphology of printed sodium picosulfate was investigated with scanning electron microscopy and optical coherence tomography. The spreading of the deposited drops was found to be governed by the contact angle of the ink with the substrate. The form of the sodium picosulfate drops changed on microcrystalline cellulose films at ambient conditions over 8 weeks and stayed unchanged on other tested substrates. Sodium picosulfate remained amorphous on all substrates according to small and wide angle X-ray scattering, differential scanning calorimetry and polarized light microscopy measurements. The absence of chemical interactions between the drug and substrates, as indicated by infrared spectroscopy, makes all tested substrates suitable for printing sodium picosulfate onto them.

ORCID iDs

Wimmer-Teubenbacher, M., Planchette, C., Pichler, H., Markl, D. ORCID logoORCID: https://orcid.org/0000-0003-0411-733X, Hsiao, W. K., Paudel, A. and Stegemann, S.;
CORE (COnnecting REpositories)