Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy

Mikhaylovskaya, A.V and Mosleh, A.O and Kotov, A.D and Kwame, J.S. and Pourcelot, T. and Golovin, I.S and Portnoy, V.K (2017) Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy. Materials Science and Engineering: A, 708. pp. 469-477. ISSN 0921-5093 (https://doi.org/10.1016/j.msea.2017.10.017)

[thumbnail of Mikhaylovskaya-etal-MSEA-2017-Superplastic-deformation-behaviour-and-microstructure-evolution]
Preview
 Text. Filename: Mikhaylovskaya_etal_MSEA_2017_Superplastic_deformation_behaviour_and_microstructure_evolution.pdf
Accepted Author Manuscript
License: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 logo
Download (1MB)| Preview

Abstract

Superplastic deformation behaviour of conventional sheets of a near-α titanium alloy (Ti-2.5Al-1.8Mn) was studied by a step-by-step decrease of the strain rate and constant strain rate tests in a temperature range of 790–915 °C. The research found that superplastic deformation is possible in a temperature range of 815–890 °С and a constant strain rate range of 2 × 10−4 to 1 × 10−3 s−1 with elongation above 300% and m-index above 0.4. Also, the research identified the optimum superplastic temperature range of 815–850 °C and constant strain rate of 4 × 10−4 s−1 which provide a maximum elongation of 600–650%. Strain hardening is accelerated by dynamic grain growth at high temperatures of 865 and 890 °С. High dislocation activity is observed at superplastic flow in α-phase. Constitutive modelling of superplastic deformation behaviour is performed, and possible deformation mechanisms are discussed. It is suggested that grain boundary sliding between the α-grains is accommodated by a dislocation slip/creep mechanism.

CORE (COnnecting REpositories)