Virtual prototyping of a catheter transducer array for internal hepatic sonoporation

Tools

Moldovan, Alexandru Corneliu and Dziewierz, Jerzy and Gachagan, Anthony and Cochran, Sandy and Lay, Holly; (2018) Virtual prototyping of a catheter transducer array for internal hepatic sonoporation. In: 2018 IEEE International Ultrasonics Symposium (IUS). IEEE, JPN. ISBN 9781538634257 (https://doi.org/10.1109/ULTSYM.2018.8579783)

[thumbnail of Moldovan-etal-IUS2018-Virtual-prototyping-of-a-catheter-transducer-array-for-internal]
Preview
 Text. Filename: Moldovan_etal_IUS2018_Virtual_prototyping_of_a_catheter_transducer_array_for_internal.pdf
Accepted Author Manuscript
Download (347kB)| Preview

Abstract

Sonoporation for targeted cancer chemotherapy in the liver with an external ultrasonic source is hampered by the ribs and fat surrounding the organ. Current therapies rely on array beam forming with sequential triggering of elements to spare the ribs. However, the peak negative pressures (PNPs) achieved in hepatic tumors are rather low and there is risk associated with high power ultrasound incident on the ribs. Here, we focus on the development of a 1-3 connectivity piezocomposite linear ultrasonic array that can be incorporated in an 11 Fr catheter to perform sonoporation of the liver from within a larger blood vessel. Issues encountered in the transducer design are mostly caused by the reduced dimensions of the catheter, which are inimical to the low frequency and high power therapeutic requirements. Thus, our approach to produce a transducer design is through a series of parametric sweeps of array parameters using finite element analysis. The output parameters of interest are PNP and beam forming to steer at more than 45° from normal. Two frequencies are considered: 1.5 MHz, set by the maximum physical transducer thickness, and 3.0 MHz, corresponding to the frequency of resonance of the contrast agents to carry the drugs. Piezoelectric materials of interest are ceramic (PZT-5H) and single crystal (PMN-29%PT, 26%PIN-PMN-32%PT). The parametric sweeps indicate that fewer pillars laterally per element, higher volume fraction (>0.68) and higher pillar aspect ratio (>0.42) achieve the lowest PNP in the load.

ORCID iDs

Moldovan, Alexandru Corneliu, Dziewierz, Jerzy ORCID logoORCID: https://orcid.org/0000-0001-6954-8224, Gachagan, Anthony ORCID logoORCID: https://orcid.org/0000-0002-9728-4120, Cochran, Sandy and Lay, Holly;
  • Item type:Book Section
    ID code:67113
    Dates:
    Date
    Event
    20 December 2018
    Published
    13 July 2018
    Accepted
    Notes:© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
    Subjects:Technology > Electrical engineering. Electronics Nuclear engineering
    Department:Faculty of Engineering > Electronic and Electrical Engineering
    Depositing user: Pure Administrator
    Date deposited:28 Feb 2019 10:30
    Last modified:11 Nov 2024 15:16
    Related URLs:
    URI:https://strathprints.strath.ac.uk/id/eprint/67113
CORE (COnnecting REpositories)