Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming

Allazadeh, M. R. and Zuelli, N. (2017) Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming. AIP Conference Proceedings, 1896 (1). 020028. ISSN 1551-7616 (https://doi.org/10.1063/1.5007985)

[thumbnail of Allazadeh-Zuelli-AIP-2017-Manufacture-of-a-four-sheet-complex-component-from-different]
Preview
 Text. Filename: Allazadeh_Zuelli_AIP_2017_Manufacture_of_a_four_sheet_complex_component_from_different.pdf
Final Published Version
Download (373kB)| Preview

Abstract

A superplastic forming (SPF) technology process was deployed to form a complex component with eight-pocket from a four-sheet sandwich panel sheetstock. Six sheetstock packs were composed of two core sheets made of Ti-6Al-4V or Ti-5Al-4Cr-4Mo-2Sn-2Zr titanium alloy and two skin sheets made of Ti-6Al-4V or Ti-6Al-2Sn-4Zr-2Mo titanium alloy in three different combinations. The sheets were welded with two subsequent welding patterns over the core and skin sheets to meet the required component’s details. The applied welding methods were intermittent and continuous resistance seam welding for bonding the core sheets to each other and the skin sheets over the core panel, respectively. The final component configuration was predicted based on the die drawings and finite element method (FEM) simulations for the sandwich panels. An SPF system set-up with two inlet gas pipe feeding facilitated the trials to deliver two pressure-time load cycles acting simultaneously which were extracted from FEM analysis for specific forming temperature and strain rate. The SPF pressure-time cycles were optimized via GOM scanning and visually inspecting some sections of the packs in order to assess the levels of core panel formation during the inflation process of the sheetstock. Two sets of GOM scan results were compared via GOM software to inspect the surface and internal features of the inflated multisheet packs. The results highlighted the capability of the tested SPF process to form complex components from a flat multisheet pack made of different titanium alloys.

ORCID iDs

Allazadeh, M. R. ORCID logoORCID: https://orcid.org/0000-0001-5710-1951 and Zuelli, N. ORCID logoORCID: https://orcid.org/0000-0002-5678-2166;
CORE (COnnecting REpositories)