Impact of various heat treatments on the microstructure evolution and mechanical properties of hot forged 18CrNiMo7-6 steel

Mandal, Paranjayee and Al Mamun, Abdullah and Lalvani, Himanshu and Da Silva, Laurie and Perez, Marcos and Muir, Lisa (2017) Impact of various heat treatments on the microstructure evolution and mechanical properties of hot forged 18CrNiMo7-6 steel. In: Heat Treat 2017, 2017-10-24 - 2017-10-26.

[thumbnail of Mandal-etal-HeatTreat2017-Impact-of-various-heat-treatments-on-the-microstructure-evolution]
Preview
 Text. Filename: Mandal_etal_HeatTreat2017_Impact_of_various_heat_treatments_on_the_microstructure_evolution.pdf
Final Published Version
Download (1MB)| Preview

Abstract

Carburizing is a method of enhancing the surface properties of components, primarily made from low to medium carbon steels, such as shafts, gears, bearings, etc. Carburized parts are generally quenched and tempered before being put into service; however, after quenching of carburized parts further annealing and hardening treatments can be employed before final tempering. This work analyses the impact of the two aforementioned heat treatment approaches on the development of subsequent microstructures and mechanical properties of hot forged 18CrNiMo7-6 steel. Moreover, this study aims to understand the impact of normalizing treatments prior to the two aforementioned heat treatment routes. Microstructural and mechanical tests were conducted on four as forged flat cylinder components that received a combination of the abovementioned heat treatments. In general, better microstructure refinement, in terms of prior austenite grain size (PAGS), was obtained for carburized parts that received the intermediate annealing and hardening treatments after quenching and prior to the final tempering. Additionally, further refinement of the martensitic pockets/blocks was observed for parts that did not receive a normalising treatment prior to carburisation. The studied heat treatments appear to have a negligible effect on the mechanical properties of the hot forged flat cylinder components.

ORCID iDs

Mandal, Paranjayee ORCID logoORCID: https://orcid.org/0000-0002-8440-703X, Al Mamun, Abdullah, Lalvani, Himanshu ORCID logoORCID: https://orcid.org/0000-0002-3466-8979, Da Silva, Laurie ORCID logoORCID: https://orcid.org/0000-0002-3079-7909, Perez, Marcos ORCID logoORCID: https://orcid.org/0000-0002-7908-044X and Muir, Lisa ORCID logoORCID: https://orcid.org/0000-0002-4336-3472;
  • Item type:Conference or Workshop Item(Paper)
    ID code:62322
    Dates:
    Date
    Event
    24 October 2017
    Published
    4 April 2017
    Accepted
    Notes:This article is made available as an electronic reprint with the permission of ASM International for the University of Strathclyde Institutional Repository. Reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this article for a fee or for commercial purposes, or modification of the content of this article is prohibited.
    Subjects:Technology > Manufactures
    Department:Faculty of Engineering > Design, Manufacture and Engineering Management
    Depositing user: Pure Administrator
    Date deposited:10 Nov 2017 12:51
    Last modified:21 Nov 2024 01:39
    URI:https://strathprints.strath.ac.uk/id/eprint/62322
CORE (COnnecting REpositories)