Synthesis of ammonia directly from wet nitrogen using a redox stable La0.75Sr0.25Cr0.5Fe0.5O3−δ–Ce0.8Gd0.18Ca0.02O2−δ composite cathode

Tools

Amar, Ibrahim A. and Lan, Rong and Tao, Shanwen (2015) Synthesis of ammonia directly from wet nitrogen using a redox stable La0.75Sr0.25Cr0.5Fe0.5O3−δ–Ce0.8Gd0.18Ca0.02O2−δ composite cathode. RSC Advances, 5 (49). pp. 38977-38983. ISSN 2046-2069 (https://doi.org/10.1039/c5ra00600g)

[thumbnail of Amar-etal-RSCA-2015-Synthesis-of-ammonia-directly-from-wet-nitrogen-using-redox-stable]
Preview
 Text. Filename: Amar_etal_RSCA_2015_Synthesis_of_ammonia_directly_from_wet_nitrogen_using_redox_stable.pdf
Accepted Author Manuscript
Download (694kB)| Preview

Abstract

Ammonia was directly synthesised from wet nitrogen at an intermediate temperature (375–425 °C) based on the oxygen-ion conduction of the Ce0.8Gd0.18Ca0.02O2−δ–((Li/Na/K)2CO3) composite electrolyte. A redox stable perovskite-based catalyst, La0.75Sr0.25Cr0.5Fe0.5O3−δ (LSCrF), was synthesised via a combined EDTA–citrate complexing sol–gel process to be used as a component of the La0.75Sr0.25Cr0.5Fe0.5O3−δ–Ce0.8Gd0.18Ca0.02O2−δ composite cathode for ammonia synthesis. Ammonia formation was studied at 375, 400 and 425 °C and a maximum ammonia formation rate of 4.0 × 10−10 mol s−1 cm−2 with corresponding Faradaic efficiency of 3.87% was observed at 375 °C when the applied voltage was 1.4 V. This is much higher than 7.0 × 10−11 mol s−1 cm−2 at 1.4 V and 400 °C when Cr-free Sr-doped LaFeO3−δ, La0.6Sr0.4FeO3−δ was used as the catalyst for the electrochemical synthesis of ammonia, indicating LSCrF is potentially a better catalyst. Ammonia was successfully synthesised using a redox stable cathode with higher formation rates at reduced temperature. Introduction of Cr3+ ions at the B-site of doped LaFeO3 improves both the chemical stability and catalytic activity for ammonia synthesis.

CORE (COnnecting REpositories)