Investigation of cold-formed steel top-hat sections under bending

Uzzaman, Asraf and Wrzesien, A.M. and Hamilton, Robert and Lim, JBP and Nash, David (2013) Investigation of cold-formed steel top-hat sections under bending. In: 14th International Conference on Civil, Structural and Environmental Engineering Computing, ICC2013, 2013-09-03 - 2013-09-06.

[thumbnail of Hamilton_R_Nash_DH_Pure_Investigation_of_cold_formed_steel_top_hat_sections_under_bending_Sep_2013.pdf]
Preview
PDF. Filename: Hamilton_R_Nash_DH_Pure_Investigation_of_cold_formed_steel_top_hat_sections_under_bending_Sep_2013.pdf
Preprint

Download (942kB)| Preview

Abstract

In recent years, with the introduction of higher strength grades, cold-formed steel sections have become increasingly more slender. As a result, top-hat purlin sections have become an alternative to conventional zed purlins, particularly when smaller purlin spans (around 4 m) are required. Such top-hat sections are torsionally stiffer than zed purlins, and have greater resistance against lateral-torsional buckling. Furthermore, they do not require anti-sag rods. However, when determining their strength, they are susceptible to buckling. In this paper, a combination of full-scale laboratory tests and finite element analyses are used to investigate the bending strength of such top-hat sections. Both upward and downward loading conditions are considered. In this paper, twenty-seven full-scale experimental tests on top-hat sections are described. The moment capacities obtained experimentally are compared against those predicted by the Eurocodes and non-linear elasto-plastic finite element analyses.

ORCID iDs

Uzzaman, Asraf ORCID logoORCID: https://orcid.org/0000-0001-9687-5810, Wrzesien, A.M., Hamilton, Robert ORCID logoORCID: https://orcid.org/0000-0002-3504-9774, Lim, JBP and Nash, David;