Aggregation kinetics of polymer colloids in reaction limited regime : experiments and simulations
Lattuada, M and Sandkuhler, P and Wu, H and Sefcik, J and Morbidelli, M (2003) Aggregation kinetics of polymer colloids in reaction limited regime : experiments and simulations. Advances in Colloid and Interface Science, 103 (1). pp. 33-56. ISSN 0001-8686 (https://doi.org/10.1016/S0001-8686(02)00082-9)
Full text not available in this repository.Request a copyAbstract
The kinetics of reaction-limited cluster aggregation of fluorinated polymer colloids in a broad range of particle volume fractions has been investigated experimentally by measuring independently the Fuchs stability ratio W and the time evolution of both the average radius of gyration <R-g> and the average hydrodynamic radius <R-h> of the aggregates mass distribution. The W value is determined from the aggregation rate at the very initial stage of the aggregation, where the presence of triplets is negligible. The time evolutions of <R-g> and <R-h> are then simulated using the cluster mass distribution calculated from the population balance equations with various aggregation kernels proposed in the literature. It is found that, when the measured W value is used, the only kernels that can correctly simulate the experimental results are the product kernel and the one derived by Odriozola et al. (Europhys. Lett. 53 (2001) 797), with some proper tuning of the exponent in the kernel. For the particle volume fraction phi < 1%, the obtained value for the exponent is 0.4 and independent of phi, while it tends to decrease for larger 4 values, most likely indicating a significant effect of multi-body interactions on the aggregation kinetics.
ORCID iDs
Lattuada, M, Sandkuhler, P, Wu, H, Sefcik, J ORCID: https://orcid.org/0000-0002-7181-5122 and Morbidelli, M;-
-
Item type: Article ID code: 44116 Dates: DateEvent19 March 2003PublishedSubjects: Technology > Chemical engineering Department: Faculty of Engineering > Chemical and Process Engineering
Technology and Innovation Centre > Bionanotechnology
Technology and Innovation Centre > Continuous Manufacturing and Crystallisation (CMAC)Depositing user: Pure Administrator Date deposited: 18 Jun 2013 14:07 Last modified: 11 Nov 2024 10:26 URI: https://strathprints.strath.ac.uk/id/eprint/44116