Frequency and fundamental signal measurement algorithms for distributed control and protection applications

Tools

Roscoe, Andrew J. and Burt, G.M. and McDonald, J.R. (2009) Frequency and fundamental signal measurement algorithms for distributed control and protection applications. IET Generation Transmission and Distribution, 3 (5). pp. 485-495. ISSN 1751-8695 (https://doi.org/10.1049/iet-gtd.2008.0517)

[thumbnail of J_2010_Roscoe_IET_GTD_FreqAndFundMeas_PostPrint.pdf]
Preview
 PDF. Filename: J_2010_Roscoe_IET_GTD_FreqAndFundMeas_PostPrint.pdf
Accepted Author Manuscript
Download (614kB)| Preview

Abstract

Increasing penetration of distributed generation within electricity networks leads to the requirement for cheap, integrated, protection and control systems. To minimise cost, algorithms for the measurement of AC voltage and current waveforms can be implemented on a single microcontroller, which also carries out other protection and control tasks, including communication and data logging. This limits the frame rate of the major algorithms, although analogue to digital converters (ADCs) can be oversampled using peripheral control processors on suitable microcontrollers. Measurement algorithms also have to be tolerant of poor power quality, which may arise within grid-connected or islanded (e.g. emergency, battlefield or marine) power system scenarios. This study presents a 'Clarke-FLL hybrid' architecture, which combines a three-phase Clarke transformation measurement with a frequency-locked loop (FLL). This hybrid contains suitable algorithms for the measurement of frequency, amplitude and phase within dynamic three-phase AC power systems. The Clarke-FLL hybrid is shown to be robust and accurate, with harmonic content up to and above 28% total harmonic distortion (THD), and with the major algorithms executing at only 500 samples per second. This is achieved by careful optimisation and cascaded use of exact-time averaging techniques, which prove to be useful at all stages of the measurements: from DC bias removal through low-sample-rate Fourier analysis to sub-harmonic ripple removal. Platform-independent algorithms for three-phase nodal power flow analysis are benchmarked on three processors, including the Infineon TC1796 microcontroller, on which only 10% of the 2000 mus frame time is required, leaving the remainder free for other algorithms.

ORCID iDs

Roscoe, Andrew J. ORCID logoORCID: https://orcid.org/0000-0003-1108-4265, Burt, G.M. ORCID logoORCID: https://orcid.org/0000-0002-0315-5919 and McDonald, J.R. ORCID logoORCID: https://orcid.org/0000-0002-7078-845X;
CORE (COnnecting REpositories)