Diode laser spectroscopy using a calibration free phasor decomposition approach with RAM nulling

Ruxton, K.C. and Chakraborty, A. and McGettrick, A.J. and Duffin, K. and Johnstone, W. and Stewart, G. (2009) Diode laser spectroscopy using a calibration free phasor decomposition approach with RAM nulling. In: 7th International Conference on Tunable Diode Laser Spectroscopy, 2009-07-13 - 2009-07-17.

Full text not available in this repository.Request a copy

Abstract

A limiting factor of tunable diode laser spectroscopy (TDLS) analysis is the large unwanted residual amplitude modulation (RAM) background present on the recovered 1st harmonic signal. A novel approach to remove the background RAM will be presented. This new technique will be used alongside the phasor decomposition method (PDM) [1], a calibration free technique for recovery of the absolute gas absorption line-shape. The RAM nulling method developed, successfully removes the background by optical cancellation. This is achieved by placing a fibre delay line, which introduces a π phase change in the modulation signal, in parallel with the gas cell line. When these lines are coupled together the background signals are at anti-phase and hence cancel each other. The main benefit being that measurement sensitivity can be increased. Results illustrating RAM nulling whilst using the PDM technique for absorption line-shape recovery will be presented. Figure 1 shows a recorded PDM measurement illustrating the difference with and without RAM Nulling.

ORCID iDs

Ruxton, K.C., Chakraborty, A., McGettrick, A.J., Duffin, K., Johnstone, W. ORCID logoORCID: https://orcid.org/0000-0002-6376-9445 and Stewart, G.;
CORE (COnnecting REpositories)