Diesel transport monitoring in simulated unconfined aquifers using miniature resistivity arrays

Tools

Sentenac, P. and Montinaro, A. and Kulessa, B. (2010) Diesel transport monitoring in simulated unconfined aquifers using miniature resistivity arrays. Environmental Earth Sciences, 61 (1). pp. 107-114. ISSN 1866-6280 (https://doi.org/10.1007/s12665-009-0325-9)

Full text not available in this repository.Request a copy

Abstract

The principal aim of this study is to assess the scope of monitoring diesel plume migration in a scaled aquifer model with a miniaturised electrical resistivity array. Respectively 1000 and 500 ml of diesel were injected in both the unsaturated and water-saturated zones of a sand body overlying a clay aquitard, and diesel migration was monitored with a miniature electrode array and an off-the-shelf resistivity meter. Inverted time-lapse electrical resistivity tomography (ERT) data reflect downward and lateral spreading of the diesel plume away from the injection point in the unsaturated zone. Diesel was also imaged to spread upwards and laterally away from the injection point in the saturated zone, as controlled by capillary rise. In both cases later-time ERT images reflected preferential pooling of diesel on the water table, as well as vertical smearing of pooled diesel in response to simulated water-table fluctuations. Repeat fluid electrical conductivity (EC) and dissolved oxygen (DO) measurements validate the observed changes in bulk resistivity caused by both diesel injections. Artefacts introduced by 2D inversion of 3D contaminant transport were abound. Time-lapse ERT imaging of diesel transport is therefore inferred to be feasible and well-suited to complementing conventional techniques of intrusive site investigation, although timelapse 3D or 4D ERT imaging is strongly advocated.

ORCID iDs

Sentenac, P. ORCID logoORCID: https://orcid.org/0000-0001-5582-7484, Montinaro, A. and Kulessa, B.;
CORE (COnnecting REpositories)