Determining the influence of ship hull deformations caused by draught change on shaft alignment application using FE analysis
Seo, Chul-Oh and Jeong, Byongug and Kim, Jung-Ryul and Song, Myeongho and Noh, Jung-Ho and Lee, Jae-ung (2020) Determining the influence of ship hull deformations caused by draught change on shaft alignment application using FE analysis. Ocean Engineering, 210. pp. 1-11. 107488. ISSN 0029-8018 (https://doi.org/10.1016/j.oceaneng.2020.107488)
Preview |
Text.
Filename: Seo_etal_OE_2020_Determining_the_influence_of_ship_hull_deformations_caused_by_draught.pdf
Accepted Author Manuscript License: Download (2MB)| Preview |
Abstract
This paper was to address the shortcomings of current design practice to evaluate the stability of the shaft alignment for a 300,000 DWT Very Large Crude Oil Carrier. An enhanced approach using FE was applied to identify the influence of hull deformation on the alignment of the shafting system. The effectiveness of this method was demonstrated in comparison with Jack up technique. Analysis results showed that the hull deformation could be a key factor affecting the offset distortion of each bearing supporting the shaft line. Moreover, it was confirmed that the deformation pattern of cargo hold was opposite to the deformation of engine room structure when hull deformation occurred due to draught change of the case ship. As new research findings, they are believed to contribute significantly to the prevention of shaft damage associated with hull deformations, thereby improving the reliability of shaft alignment for similar types of vessels.
ORCID iDs
Seo, Chul-Oh, Jeong, Byongug ORCID: https://orcid.org/0000-0002-8509-5824, Kim, Jung-Ryul, Song, Myeongho, Noh, Jung-Ho and Lee, Jae-ung;-
-
Item type: Article ID code: 72340 Dates: DateEvent15 August 2020Published11 June 2020Published Online3 May 2020Accepted20 September 2019SubmittedNotes: © 2020 Elsevier Ltd. All rights reserved. Chul-Oh Seo, Byongug Jeong, Jung-Ryul Kim, Myeongho Song, Jung-Ho Noh, Jae-ung Lee, Determining the influence of ship hull deformations caused by draught change on shaft alignment application using FE analysis, Ocean Engineering, Volume 210, 2020, 107488, https://doi.org/10.1016/j.oceaneng.2020.107488 Subjects: Naval Science > Naval architecture. Shipbuilding. Marine engineering Department: Faculty of Engineering > Naval Architecture, Ocean & Marine Engineering Depositing user: Pure Administrator Date deposited: 13 May 2020 11:00 Last modified: 23 Sep 2024 21:29 Related URLs: URI: https://strathprints.strath.ac.uk/id/eprint/72340