A tensile strength apparatus with the facility to monitor negative pore-water pressure

Murray, I. and Tarantino, A. and Francescon, F. (2018) A tensile strength apparatus with the facility to monitor negative pore-water pressure. Geotechnical Testing Journal. ISSN 0149-6115 (In Press)

[thumbnail of Murray-etal-GTJ-2018-A-tensile-strength-apparatus-with-the-facility-to-monitor]
Preview
Text. Filename: Murray_etal_GTJ_2018_A_tensile_strength_apparatus_with_the_facility_to_monitor.pdf
Accepted Author Manuscript

Download (1MB)| Preview

Abstract

This paper presents a new testing method for investigating the behaviour of clayey geomaterials subjected to a tensile (negative) total stress. The method includes the use of high capacity tensiometers to measure the pore-water pressure of the test specimen, an aspect which has not been demonstrated in any other direct tensile testing method. This addition allows interpretation of failure data in terms of effective stress rather than total stress, which is the approach that should be pursued in the saturated range. The test specimen shape and loading method have been modified from those commonly seen in existing literature to ensure that the direction of the major principal stress in the failure zone coincides with the direction of the externally applied tensile force, allowing for a more accurate analysis of tensile failure. Results are shown for saturated specimens and compared to results obtained for the same soil in uniaxial compression, using a modified version of the presented uniaxial tensile method, and a triaxial compression test. It is demonstrated that crack initiation occurs by shear failure if the data is interpreted in terms of effective stress rather than total stress, and that the failure mechanisms under tension do not differ from compression.

ORCID iDs

Murray, I. ORCID logoORCID: https://orcid.org/0000-0003-3470-6303, Tarantino, A. ORCID logoORCID: https://orcid.org/0000-0001-6690-748X and Francescon, F.;