Study on direct flame solid oxide fuel cell using flat burner and ethylene flame

Hossain, Md. Moinul and Myung, Jaeha and Lan, Rong and Cassidy, Mark and Burns, Iain and Tao, Shanwen and Irvine, John T. S. (2015) Study on direct flame solid oxide fuel cell using flat burner and ethylene flame. ECS Transactions, 68 (1). pp. 1989-1999. ISSN 1938-6737

[img]
Preview
Text (Hossain-etal-ECST-2015-Study-on-direct-flame-solid-oxide-fuel-cell-using-flat-burner-and-ethylene-flame)
Hossain_etal_ECST_2015_Study_on_direct_flame_solid_oxide_fuel_cell_using_flat_burner_and_ethylene_flame.pdf
Accepted Author Manuscript

Download (484kB)| Preview

    Abstract

    This paper presents an experimental investigation of direct flame solid oxide fuel cell (SOFC) by using a flat-flame burner and fuel-rich ethylene/air premixed flames. A direct flame fuel cell (DFFC) setup is designed and implemented to measure electrochemical characteristics of electrolyte supported (i.e., single cell consisting of Ce0.9Ni0.1O2-δ anode/GDC electrolyte/LSCF-GDC cathode) fuel cell. The fuel cell temperature and cell performance were investigated by operating various fuel/air equivalence ratios and varying distance between burner surface and the fuel cell. A maximum power density of 41 mW/cm2 and current density of 121 mA/cm2 were achieved. Experimental results suggest that the fuel cell performance was greatly influenced by the flame operating conditions and cell position in the flame. The uniformity of the flame temperature and the fuel cell stability were also investigated and calculations of equilibrium gas species composition were performed.