Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting

Tools

Zare Chavoshi, Saeed and Goel, Saurav and Luo, Xichun (2015) Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting. Modelling and Simulation in Materials Science and Engineering, 24 (1). 015002. ISSN 0965-0393 (https://doi.org/10.1088/0965-0393/24/1/015002)

[thumbnail of Chavoshi-etal-MSMSE-2015-Molecular-dynamics-simulation-investigation-on-the-plastic-flow-behaviour-of-silicon]
Preview
 Text. Filename: Chavoshi_etal_MSMSE_2015_Molecular_dynamics_simulation_investigation_on_the_plastic_flow_behaviour_of_silicon.pdf
Accepted Author Manuscript
Download (3MB)| Preview

Abstract

Molecular dynamics (MD) simulation was carried out to acquire an in-depth understanding of the flow behaviour of single crystal silicon during nanometric cutting on three principal crystallographic planes and at different cutting temperatures. The key findings were that (i) the substrate material underneath the cutting tool was observed for the first time to experience a rotational flow akin to fluids at all the tested temperatures up to 1200 K. (ii) The degree of flow in terms of vorticity was found higher on the (1 1 1) crystal plane signifying better machinability on this orientation in accord with the current pool of knowledge (iii) an increase in the machining temperature reduces the spring-back effect and thereby the elastic recovery and (iv) the cutting orientation and the cutting temperature showed significant dependence on the location of the stagnation region in the cutting zone of the substrate.

ORCID iDs

Zare Chavoshi, Saeed ORCID logoORCID: https://orcid.org/0000-0001-6083-585X, Goel, Saurav and Luo, Xichun ORCID logoORCID: https://orcid.org/0000-0002-5024-7058;
CORE (COnnecting REpositories)