Uniaxial experimental study of the deformation behavior and energy evolution of conjugate jointed rock based on AE and DIC methods

Pan, Jiliang and Wu, Xu and Guo, Qifeng and Xi, Xun and Cai, Meifeng (2020) Uniaxial experimental study of the deformation behavior and energy evolution of conjugate jointed rock based on AE and DIC methods. Advances in Civil Engineering, 2020. 8850250. ISSN 1687-8094 (https://doi.org/10.1155/2020/8850250)

[thumbnail of Pan-etal-ACE-2020-Uniaxial-experimental-study-of-the-deformation-behavior-and-energy-evolution-of-conjugate] Text. Filename: Pan_etal_ACE_2020_Uniaxial_experimental_study_of_the_deformation_behavior_and_energy_evolution_of_conjugate.pdf
Final Published Version
License: Creative Commons Attribution 4.0 logo
Download (8MB)

Abstract

Conjugate joint is one of the most common joint forms in natural rock mass, which is produced by different tectonic movements. To better understand the preexisting flaws, it is necessary to investigate joint development and its effect on the deformation and strength of the rock. In this study, uniaxial compression tests of granite specimens with different conjugate joints distribution were performed using the GAW-2000 compression-testing machine system. The PCI-2 acoustic emission (AE) testing system was used to monitor the acoustic signal characteristics of the jointed specimens during the entire loading process. At the same time, a 3D digital image correlation (DIC) technique was used to study the evolution of stress field before the peak strength at different loading times. Based on the experimental results, the deformation and strength characteristics, AE parameters, damage evolution processes, and energy accumulation and dissipation properties of the conjugate jointed specimens were analyzed. It is considered that these changes were closely related to the angle between the primary and secondary joints. The results show that the AE counts can be used to characterize the damage and failure of the specimen during uniaxial compression. The local stress field evolution process obtained by the DIC can be used to analyze the crack initiation and propagation in the specimen. As the included angle increases from 0° to 90°, the elastic modulus first decreases and then increases, and the accumulative AE counts of the peak first increase and then decrease, while the peak strength does not change distinctly. The cumulative AE counts of the specimen with an included angle of 45° rise in a ladder-like manner, and the granite retains a certain degree of brittle failure characteristics under the axial loading. The total energy, elastic energy, and dissipation energy of the jointed specimens under uniaxial compression failure were significantly reduced. These findings can be regarded as a reference for future studies on the failure mechanism of granite with conjugate joints.

CORE (COnnecting REpositories)