Strathprints Home | Open Access | Browse | Search | User area | Copyright | Help | Library Home | SUPrimo

Items where subject is "Technology > Manufactures"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item type | No Grouping
Number of items at this level: 216.

Article

Azushima, A. and Kopp, R. and Korhonen, A. and Yang, D.Y. and Micari, F. and Lahoti, G.D. and Groche, P. and Yanagimoto, J. and Tsuji, N. and Rosochowski, A. and Yanagida, A. (2008) Severe plastic deformation (SPD) processes for metals. CIRP Annals - Manufacturing Technology, 57 (2). pp. 716-735. ISSN 0007-8506

Bititci, U. and Suwignjo, P. and Carrie, A.S. (2001) Strategy management through quantitative modelling of performance measurement systems. International Journal of Production Economics, 69 (1). pp. 15-22. ISSN 0925-5273

Boyle, I. and Rong, Y. M. and Brown, David C. (2011) A review and analysis of current computer-aided fixture design approaches. Robotics and Computer Integrated Manufacturing, 27 (1). pp. 1-12. ISSN 0736-5845

Camilleri, Duncan (2012) Thermo-mechanical behaviour of DBC substrate assemblies subject to soldering fabrication processes. Soldering and Surface Mount Technology, 24 (2). pp. 100-111. ISSN 0954-0911

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

Campbell, Stuart and Ley, F.H. and Galloway, Alexander and McPherson, Norman (2014) Artificial neural network optimisation of shielding gas flow rate in gas metal arc welding subjected to cross drafts when using alternating shielding gases. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (In Press)

Carus, D. and Grant, C. and Wattie, R. and Pridham, M.S. (2006) Development and validation of a technique to measure and compare the opening characteristics of tamper-evident bottle closures. Packaging Technology and Science, 19 (2). pp. 105-118. ISSN 0894-3214

Chang, Wenlong and Luo, X-C and Ritchie, J. M. and Sun, J.-N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 0954-4054

Chang, Wenlong and Luo, X. and Ritchie, J.M. and Sun, J. and Mack, C. (2011) Laser deburring process for structured edges on precision moulds. International Journal of Nanomanufacturing, 7 (3-4). pp. 327-335. ISSN 1746-9392

Chang, Wenlong and Sun, J. and Luo, X. and Ritchie, J.M. and Mack, C. (2011) Investigation of microstructured milling tool for deferring tool wear. WEAR, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Chen, Wanqun and Liang, Yingchun and Luo, Xichun and Sun, Yazhou and Wang, Heran (2014) Multi-scale surface simulation of the KDP crystal fly cutting machining. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (In Press)

Chronakis, Ioannis S. and Mekras, Nikolaos D. and Wiesauer, Karin and Breuer, Eva and Stifter, David and Fuentes, Gonzalo F. and Qin, Yi (2010) MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 963-971. ISSN 0268-3768

Clark, Alasdair W. and Thompson, David G. and Graham, Duncan and Cooper, Jonathan M. (2014) Engineering DNA binding sites to assemble and tune plasmonic nanostructures. Advanced Materials, 26 (25). pp. 4286-4292. ISSN 0935-9648

Dai, X. and Qin, Yi and Ma, L. and Juster, N. (2009) A knowledge-based design advisory system for collaborative design for micromanufacturing. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Ding, P.P. and Yang, Y. and Qin, Yi and Liu, J. and Yao, W.X. (2009) Study on optimization of isothermal forging process of Ti alloys. Forging and Stamping Technology, 34 (3). pp. 121-123. ISSN 1000-3940

Eynard, B. and Yan, X.T. (2008) Collaborative product development. Concurrent Engineering: Research and Applications, 16 (1). pp. 5-7. ISSN 1063-293X

Farrugia, P. and Borg, J. and Camilleri, K. and Giannini, F. and Yan, X.T. (2005) Extracting 3D shape models and related life knowledge from paper-based sketches. International Journal of Computer Applications in Technology, 23 (2/3/4). pp. 120-137. ISSN 0952-8091

Fuentes, G.G. and Diaz de Cerio, M.J. and Garcia Alvarez, Joaquin and Martinez, R. and Bueno, R and Rodriguez, R.J and Rico, M and Montala, F and Qin, Yi (2009) CrCN cathodic arc PVD coatings. Thin Solid Films, 517 (20). pp. 5894-5899. ISSN 0040-6090

Fuentes, G.G. and Díaz de Cerio, M.J. and García, J.A. and Martínez, R. and Bueno, R. and Rodríguez, R.J. and Rico, M. and Montalá, F. and Qin, Yi (2008) Gradient Cr(C,N) cathodic arc PVD coatings. Surface and Coatings Technology, 203 (5-7). pp. 670-674. ISSN 0257-8972

Geissdöfer, S. and Rosochowski, A. and Olejnik, L. and Engel, U. and Richert, M. (2008) Micro-extrusion of ultrafine grained copper. International Journal of Material Forming, 1 (Suppl 1). pp. 455-458. ISSN 1960-6206

Gijo, E. V. and Antony, Jiju and Kumar, Maneesh and McAdam, Rodney and Hernandez, Jose Luis (2014) An application of Six Sigma methodology for improving the first pass yield of a grinding process. Journal of Manufacturing Technology Management, 25 (1). pp. 125-135. ISSN 1741-038X

Goel, S. and Luo, X. and Reuben, R.L. (2012) Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide. Computational Materials Science, 51 (1). pp. 402-408. ISSN 0927-0256

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. (2011) Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting. Nanoscale Research Letters, 6. pp. 1-9. ISSN 1931-7573

Grierson, Hilary (2011) A set of nine principles for distributed-design information storing. Design Principles and Practices, 5 (3). pp. 607-624. ISSN 1833-1874

Hart, R.A. and McGregor, P.G. (1988) The returns to labor services in West-German manufacturing-industry. European Economic Review, 32 (4). pp. 947-963. ISSN 0014-2921

Hatcher, G. D. and Ijomah, W. L. and Windmill, J. F. C. (2011) Design for remanufacture : a literature review and future research needs. Journal of Cleaner Production, 19 (17-18). pp. 2004-2014. ISSN 0959-6526

Ijomah, W.L. (2008) A tool to improve training and operational effectiveness in remanufacturing. International Journal of Computer Integrated Manufacture, 21 (6). pp. 676-701. ISSN 0951-192X

Ijomah, W.L. and Childe, S.J. (2007) A model of the operations concerned in re-manufacture. International Journal of Production Research, 45 (24). pp. 5857-5880. ISSN 0020-7543

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Development of design for remanufacturing guidelines to support sustainable manufacturing. Robotics and Computer Integrated Manufacturing, 23 (6). pp. 712-719. ISSN 0736-5845

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Development of robust design-for-remanufacturing guidelines to further the aims of sustainable development. International Journal of Production Research, 45 (18-19). pp. 4513-4536. ISSN 0020-7543

Ijomah, Winifred (2009) Addressing decision making for remanufacturing operations and design-for-remanufacture. International Journal of Sustainable Engineering, 2 (2). pp. 91-102. ISSN 1939-7038

Kakaie-Lafdaini, Mohammad Hadi and Ghadiri-Zahrani, Ismaeil and Galloway, Alexander (2014) Optimization study of weld geometry in the tandem submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (In Press)

Kennedy, B. and DeVor, R. and Rosochowski, A. (2010) First-place finish; imparting fine surface finishes when micromilling. Micromanufacturing, 3 (1). pp. 29-32.

King, Andrew M. and Burgess, Stuart C. and Ijomah, W. and McMahon, Chris A. (2005) Reducing waste: repair, recondition, remanufacture or recycle? Sustainable Development, 14 (4). pp. 257-267. ISSN 0968-0802

Kovach, Jami and Cho, Byung Rae and Antony, Jiju (2009) Development of a variance prioritized multiresponse robust design framework for quality improvement. International Journal of Quality and Reliability Management, 26 (4). pp. 380-396. ISSN 0265-671X

Kumar, Maneesh and Antony, Jiju and Tiwari, M.K. (2011) Six Sigma implementation Framework for SMEs : a roadmap to manage and sustain the change. International Journal of Production Research, 49 (18). pp. 5449-5467. ISSN 0020-7543

Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2002) The evolution of microstructure during thin slab direct rolling processing in vanadium microalloyed steel. ISIJ International, 42 (6). pp. 636-644. ISSN 0915-1559

Li, Junquan and Post, Mark and Lee, Regina (2013) Real-time nonlinear attitude control system for nanosatellite applications. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1661-1671. ISSN 0731-5090

Li, Y. and Baker, T.N. and Mitchell, P.S. (2005) Vanadium microalloyed steel for thin slab casting and direct rolling. Materials Science Forum, 500-501. pp. 237-244. ISSN 0255-5476

Liang, Yingchun and Chen, Wanqun and Sun, Yazhou and Luo, Xichun and Lu, Lihua and Liu, Haitao (2014) A mechanical structure-based design method and its implementation on a fly-cutting machine tool design. International Journal of Advanced Manufacturing Technology, 70 (9-12). pp. 1915-1921. ISSN 0268-3768

Lim, J.B.P. and King, C. and Rathbone, A. and Davies, J. and Edmondson, V. (2005) Eurocode 3 and the in-plane stability of portal frames. The Structural Engineer, 83 (21). pp. 43-49. ISSN 1466-5123

Lim, J.B.P. and Nethercot, D.A. (2002) Design and development of a general cold-formed steel portal framing system. The Structural Engineer, 80 (21). pp. 31-40. ISSN 1466-5123

Lim, J.B.P. and Nethercot, D.A. (2002) F. E.-assisted design of the eaves bracket of a cold-formed steel portal frame. Steel and Composite Structures, 2 (6). pp. 411-428. ISSN 1229-9367

Lim, J.B.P. and Nethercot, D.A. (2003) Serviceability design of a cold-formed steel portal frame having semi-rigid joints. Steel and Composite Structures, 3 (6). pp. 451-474. ISSN 1229-9367

Lim, T.C. and Medellin, H. and Sun, R. and Ritchie, J.M. and Corney, J.R. (2009) Virtual assembly rapid prototyping of near net shapes. Ingeniería Mecánica. Tecnología y Desarrollo, 3 (2). ISSN 1029516X

Lu, Dong and Yang, Yi and Qin, Yi and Yang, Gang (2012) Effect of particle size and sintering temperature on densification during coupled multifield-activated microforming. Journal of Materials Research, 27 (20).

Luo, X. and Sun, J. and Ritchie, J.M. and Chang, W. and Wang, W. (2011) Deterministic fabrication of nanostructures for plasmonic lens by focused ion beam. International Journal of Advanced Manufacturing Technology, 57 (9-12). pp. 1003-1009. ISSN 0268-3768

MacBryde, Jillian and Paton, Steve and Mendibil, Kepa (2010) From manufacturing to high value manufacturing : exploring this transition. Journal of General Management, 36 (2). pp. 65-79. ISSN 0306-3070

Mair, G.M. (1999) Transparent telepresence research. Industrial Robot: An International Journal, 26 (3). pp. 209-215. ISSN 0143-991X

Maritz, Alex and de Waal, Anton and Buse, Stephan and Herstatt, Cornelius and Lassen, Astrid and Maclachlan, Ross (2014) Innovation education programs : toward a conceptual framework. European Journal of Innovation Management, 17 (2). pp. 166-182. ISSN 1460-1060

McGregor, M. and Wheel, Marcus (2014) On the coupling number and characteristic length of micropolar media of differing topology. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 470 (2169). p. 20140150. ISSN 1364-5021

Medellin, H. and Corney, J.R. and Ritchie, J.M. and Lim, Theodore (2010) Automatic generation of robot and manual assembly plans using octrees. Assembly Automation, 30 (2). pp. 173-183. ISSN 0144-5154

Micheli, L. and Sarmah, N. and Luo, X. and Reddy, K.S. and Mallick, T.K. (2013) Opportunities and challenges in micro- and nano-technologies for concentrating photovoltaic cooling : a review. Renewable and Sustainable Energy Reviews, 20 (April). pp. 595-610. ISSN 1364-0321

Moroni, F. and Palazzetti, Roberto and Zucchelli, A. and Pirondi, A. (2013) A numerical investigation on the interlaminar strength of nanomodified composite interfaces. Composites Part B: Engineering, 55. pp. 635-641. ISSN 13598368

Munoz De Escalona, Patricia and Maropoulos, Paul G. (2014) A geometrical model for surface roughness prediction when face milling Al 7075-T7351 with square insert tools. Journal of Manufacturing Systems. ISSN 0278-6125

Muscat, Martin and Camilleri, Duncan (2013) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. International Journal of Pressure Vessels and Piping, 108-109. pp. 61-66. ISSN 0308-0161

Octavio, Alberto and O'Leary, Richard L. and Whiteley, Simon M. and Martínez- Graullera, Óscar and Martín-Arguedas, Carlos and Gómez-Ullate, Luis and Montero de Espinosa, Francisco (2011) Air-coupled linear and sparse cMUT array manufactured using MUMPs process. Microsystem Technologies, 17 (10-11). pp. 1635-1644. ISSN 0946-7076

Olejnik, L. and Kulczyk, M. and Pachla, W. and Rosochowski, A. (2009) Hydrostatic extrusion of UFG aluminium. International Journal of Material Forming, 2 (Suppl 1). pp. 621-624. ISSN 1960-6206

Olejnik, L. and Presz, W. and Rosochowski, A. (2009) Backward extrusion using micro-blanked aluminium sheet. International Journal of Material Forming, 2 (Suppl 1). pp. 617-620. ISSN 1960-6206

Olejnik, L. and Rosochowski, A. (2009) Incremental method of equal-channel angular pressing (ECAP). Przeglad Mechaniczny (10). pp. 22-27. ISSN 0033-2259

Olejnik, L. and Rosochowski, A. (2008) Scaled-up ECAP with enhanced productivity. Steel Research International, 2. pp. 439-447. ISSN 1611-3683

Olejnik, L. and Rosochowski, A. and Richert, M. (2008) Incremental ECAP of plates. Materials Science Forum, 548-586. pp. 108-113. ISSN 0255-5476

Palazzetti, R. and Zucchelli, A. and Gualandi, C. and Focarete, M. L. and Donati, L. and Minak, G. and Ramakrishna, S. (2012) Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates. Composite Structures, 94 (2). pp. 571-579. ISSN 0263-8223

Pan, W. and Qin, Y. (2008) FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models. Journal of Materials Processing Technology, 201 (1-3). pp. 220-225. ISSN 0924-0136

Pan, W. and Qin, Yi and Law, F. and Ma, Y. and Brockett, A. and Juster, N.P. (2008) Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming. International Journal of Advanced Manufacturing Technology, 38 (3-4). pp. 393-401. ISSN 0268-3768

Qin, Y. and Brockett, A. and Ma, Y. and Razali, Akhtar and Zhao, J. and Harrison, C.S. and Pan, W. and Dai, X. and Loziak, D. (2010) Micro-manufacturing : Research, technology outcomes and development issues. International Journal of Advanced Manufacturing Technology, 47 (9-12). pp. 821-837. ISSN 0268-3768

Qin, Yi and Díaz de Cerio, M.J. and Fuentes, G.G. and Martínez, R. and Rodriguez, R. and Spain, E. and Housden, J. and Hörnig, W. (2009) Temperature-dependent contact phenomena of PVD- and CVD-deposited DLC films sliding on the thin aluminium foil. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Qin, Yi and Zhou, J. and Peng, X. (2008) A coupled thermal-mechanical analysis of a mould-billet system during continuous casting. International Journal of Advanced Manufacturing Technology, 42 (5-6). pp. 421-428. ISSN 0268-3768

Quail, Francis J. and Scanlon, T.J. and Stickland, M.T. (2010) Development of a regenerative pump impeller using rapid manufacturing techniques. Rapid Prototyping Journal, 16 (5). pp. 337-344. ISSN 1355-2546

Rashid, W.B. and Goel, S. and Luo, X. and Ritchie, J.M. (2013) The development of a surface defect machining method for hard turning processes. WEAR, 302 (1-2). pp. 1124-1135. ISSN 0043-1648

Rashid, W.B. and Goel, S. and Luo, X. and Ritchie, J.M. (2013) An experimental investigation for the improvement of attainable surface roughness during hard turning process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (2). pp. 338-342. ISSN 0954-4054

Razali, Akhtar and Qin, Yi and Harrison, Colin and Brockett, Andrew (2009) Design considerations for developing a new, ultra-high precision feeder for micro-sheet-forming applications. International Journal of Nanomanufacturing, 3 (1-2). pp. 40-54. ISSN 1746-9392

Rehman, Fayyaz U. and Yan, Xiu-Tian (2010) Application of context knowledge in supporting conceptual design decision making. International Journal of Product Development, 13 (1). pp. 47-66. ISSN 1477-9056

Rosochowska, M. and Rosochowski, A. and Olejnik, L. (2009) Finite element analysis of forward extrusion of 1010 steel. Annals of Dunărea de Jos, University of Galaţi, Fascicle V, Technologies in Machine Building. ISSN 1221-4566

Rosochowski, A. (2009) UFG metals for micromanufacturing. Micromanufacturing, 2 (1). p. 40.

Rosochowski, A. and Olejnik, L. (2008) Finite element analysis of two-turn incremental ECAP. International Journal of Material Forming, 1 (Suppl 1). pp. 483-486. ISSN 1960-6206

Rosochowski, Andrzej and Olejnik, J (2010) Current practice and future opportunities for two-turn ECAP. Materials Science Forum, 667-669. pp. 121-126.

Rosochowski, Andrzej and Olejnik, Lech and Richert, Maria (2008) Double-billet incremental ECAP. Materials Science Forum, 584-586. pp. 139-144. ISSN 02555476

Rosochowski, A. and Olejnik, L. (2009) Ultrafine grains - a new option for light metals. Materials Technology, 24 (3). pp. 139-142. ISSN 1066-7857

Rosochowski, Andrzej and Olejnik, J (2011) Incremental equal channel angular pressing for grain refinement. Materials Science Forum, 674. pp. 19-28.

Rubio, Luis and De la Sen, Manuel and Longstaff, Andrew and Fletcher, Simon (2013) Model based expert system to automatically adapt milling forces in Pareto optimal multi-objective working points. Expert Systems with Applications, 40 (6). pp. 2312-2322. ISSN 0957-4174

Rubio, Luis and De la Sen, Manuel and Longstaff, Andrew and Myers, Alan (2013) Analysis of discrete time schemes for milling forces control under fractional order holds. International Journal of Precision Engineering and Manufacturing, 14 (5). pp. 735-744. ISSN 1229-8557

Saghafi, Hamed and Zucchelli, Andrea and Minak, Giangiacomo and Palazzetti, Roberto (2014) The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials. Composite Structures, 109 (1). pp. 41-47. ISSN 0263-8223

Salamati, Mohammad Reza and Rosochowski, Andrzej (2014) Using FEA in assessing backward extrusion of multiple micro-pins. Key Engineering Materials, 611-612. pp. 589-596. ISSN 1013-9826

Sinn, Thomas and Hilbich, Daniel and Vasile, Massimiliano (2014) Inflatable shape changing colonies assembling versatile smart space structures. Acta Astronautica, 104 (1). pp. 45-60. ISSN 0094-5765

Sun, J. and Liu, Yifan and Ritchie, J.M. and Luo, Xichun (2014) A haptic digital tool to assist the design, planning and manufacture of micro- and nanostructures. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089 (In Press)

Sundin, Erik and Lindahl, Mattias and Ijomah, Winifred (2009) Product design for product/service systems : design experiences from Swedish industry. Journal of Manufacturing Technology Management, 20 (5). pp. 723-753. ISSN 1741-038X

Tan, Xincai and Chen, Xiaogang and Conway, Paul P. and Yan, X.T. (2007) Effects of plies assembling on textile composite cellular structures. Materials and Design, 28 (3). pp. 857-870. ISSN 0261-3069

Tanyimboh, T. and Kalungi, P. (2008) Optimal long-term design, rehabilitation and upgrading of water distribution networks. Engineering Optimization, 40 (7). pp. 637-654. ISSN 0305-215X

Thomason, J.L. (2010) Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites. Polymer Composites, 31 (9). pp. 1525-1534. ISSN 0272-8397

Thomason, J.L. (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Composites Part A: Applied Science and Manufacturing, 40 (2). pp. 114-124. ISSN 1359-835X

Thomason, J.L. and Ali, J.Z. and Anderson, J. (2010) The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning. Composites Part A: Applied Science and Manufacturing, 41 (7). pp. 820-826. ISSN 1359-835X

Timans, W. and Antony, J. and Ahaus, K. and van Solingen, R. (2011) Implementation of Lean Six Sigma in small- and medium- sized manufacturing enterprises in the Netherlands. Journal of the Operational Research Society, 63. pp. 339-353. ISSN 0160-5682

Tingey, Christopher and Galloway, Alexander and Toumpis, Athanasios and Cater, Stephen R. (2014) Effect of centreline tool deviation on the mechanical properties of friction stir welded DH 36 steel. Materials and Design. ISSN 0261-3069 (In Press)

Tiwari, M.K. and Antony, J. and Montgomery, D.C. (2008) Editorial note for the special issue on 'effective decision support to implement lean and six sigma methodologies in the manufacturing and service sectors'. International Journal of Production Research, 46 (23). pp. 6563-6566. ISSN 0020-7543

Torres-Sanchez, Carmen and Corney, Jonathan (2009) Porosity tailoring mechanisms in sonicated polymeric foams. Smart Materials and Structures, 18 (10). pp. 1-13. ISSN 0964-1726

Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi and Poletz, Nicolas (2014) Thermo-mechanical deformation behaviour of DH36 steel during friction stir welding by experimental validation and modelling. Science and Technology of Welding and Joining. ISSN 1362-1718 (In Press)

Trendafilova, Irina and Palazzetti, Roberto and Zucchelli, Andrea (2014) Delamination assessment in structures made of composites based on general signal correlation. International Journal of Structural Stability and Dynamics, 14 (8). ISSN 0219-4554

Wang, Yan-en and Yan, Xiu-Tian and Maruthachalam, Raam Kumar and Wei, Sheng-Min (2006) Integration of collaborative design and process planning for artificial bone scaffold 3D printer nozzle. Lecture Notes in Computer Science, 4101. pp. 132-140. ISSN 0302-9743

Wood, Paul and Schley, C.A. and Williams, Mark A and Rusinek, A. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials and Design, 32 (4). pp. 2246-2259. ISSN 0264-1275

Wood, Paul and Qarni, Muhammad Jawad and Blackwell, Paul and Cerny, Vladimir and Brennand, Phillip and Wilkinson, Steven and Rosochowski, Andrzej (2013) Modelling the superplastic forming of a multi-sheet diffusion bonded titanium alloy demonstrator fan blade. Materials Science Forum, 735. pp. 215-223. ISSN 0255-5476

Yakushina, Evgenia and Reshetov, Aleksey and Rosochowski, Andrzej (2014) Optimisation of diffusion bonding parameters of Ti alloys through the structure and surface conditions. Materials Science Forum, 783-786. pp. 2845-2850. ISSN 0255-5476

Yan, Xiu-Tian and Stewart, Barry (2010) Developing modular product family using GeMoCURE within an SME. International Journal of Manufacturing Research, 5 (4). pp. 449-463. ISSN 1750-0591

Zeng, Q.F. and Zhang, L.T. and Xu, Y.D. and Cheng, L.F. and Yan, X.T. and Zu, J.K. and Dai, G.Z. (2009) Designing expert system for in situ toughened Si3N4 based on adaptive neural fuzzy inference system and genetic algorithms. Materials and Design, 30 (2). pp. 256-259. ISSN 0264-1275

Zhang, Guoyuan and Zhao, Weigang and Yan, Xiu (2014) Experimental study on the water lubrication of non-contacting face seals for turbopumps. Industrial Lubrication and Tribology, 66 (2). pp. 314-321. ISSN 0036-8792

Zhang, Yuxuan and Galloway, Alexander and Wood, James and Olsson Robbie, Mikael and Easton, David and Zhu, Wenzhong (2014) Interfacial metallurgy study of brazed joints between tungsten and fusion related materials for divertor design. Journal of Nuclear Materials. ISSN 0022-3115

Zhou, Xingguo and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

Zhu, Zheng Hong and Post, Mark and Meguid, Shaker A. (2012) The potential of ultrasonic non-destructive measurement of residual stresses by modal frequency spacing using leaky lamb waves. Experimental Mechanics, 52 (9). pp. 1329-1339. ISSN 0014-4851

Book

Geissdörfer, S. and Rosochowski, A. and Olejnik, L. and Engel, U. (2008) Micro-extrusion of an ultrafine grained copper can. Proceedings of the 4th International Conference on Multi-Material Micro Manufacture . Whittles Publishing, Dunbeath. ISBN 978-1904445-76-0

Mair, G.M. (1988) Industrial Robotics. Prentice Hall, UK, USA, pp. 1-354. ISBN 0-13-463209-5

Mair, G.M. (1993) Mastering Manufacturing. Macmillan, UK. ISBN 0-333-54230-4

Mair, G.M. (1996) Mastering Manufacturing (Mandarin Translation). Macmillan, Taiwan. ISBN 957-8894-83-X

Rees, A. and Dimov, S.S. and Minev, R. and Lalev, G. and Rosochowski, A. and Olejnik, L. (2009) The effect of surface integrity of components processed by μWEDM. International Conferences on Multi-Material Micro Manufacture (4M)/International Conferences on Micro Manufacturing (ICOMM) . Professional Engineering Publishing, United Kingdom.

Book Section

Albores-Barajas, P.A. and Ball, P.D. and MacBryde, J.C. and Bititci, U.S. (2003) A comparative study of the simulation analysis of e-business implementation in manufacturing companies. In: Collaborative Systems for Production Management. Springer Netherlands, pp. 359-374. ISBN 978-1-4020-7542-1

Camilleri, D. and Gray, T.G.F. and Nash, D.H. (2008) Mitigation of welding distortion and residual stresses via cryogenic CO2 cooling - a numerical investigation. In: 17th International Conference on Computer Technology in Welding and Manufacturing: Proceedings of Conference Held at Cranfield University in June 2008. TWI Ltd. ISBN 9781903761076

Chan, F. T. S. and Chung, S. H. and Wong, T. C. (2008) Scheduling of multi-site production problem with the machine maintenance by genetic algorithms. In: Proceedings of the 38th International Conference on Computers and Industrial Engineering. Publishing House Electronics Industry, pp. 2057-2061. ISBN 9787121074370

Chan, F. T. S. and Wong, T. C. and Chan, L. Y. (2004) Equal size lot streaming to job-shop scheduling problem using genetic algorithms. In: Proceedings of the 2004 IEEE International Symposium on Intelligent Control, 2004. IEEE, New York, pp. 472-476. ISBN 0780386353

Chan, F. T. S. and Wong, T. C. and Chan, P. L. Y. (2005) Lot streaming technique in job-shop environment. In: Proceedings of the 13th Mediterranean Conference on Control and Automation. IEEE, Piscataway, New Jersey, pp. 364-369. ISBN 0780389360

Chan, Felix T S and Wong, T. C. and Chan, P. L Y (2008) The application of lot streaming to assembly job shop under resource constraints. In: IFAC Proceedings Volumes (IFAC-PapersOnline). International Federation of Automatic Control (IFAC). ISBN 9783902661005

Chang, Wenlong and Luo, X. and Sun, J. and Zhao, Q. and Zhao, Y. (2012) Laser assisted micro grinding of high strength materials. In: Precision Machining VI. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 44-49. ISBN 9783037852972

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. and Sun, J. (2011) Simulation study of cutting forces, stresses and temperature during nanometric cutting of single crystal silicon. In: Key Engineering Materials. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 223-228. ISBN 9783037852972

Goel, S. and Luo, X. and Reuben, R.L. and Rashid, W.B. and Sun, J. (2011) Single point diamond turning of single crystal silicon carbide : molecular dynamic simulation study. In: Key Engineering Materials. Trans Tech Publications Ltd, Durnten-Zurich, Switzerland, pp. 150-155. ISBN 9783037852972

Harrison, C.S. and Gowland, T. and Dove, L.G. and Makin, B.M. (1988) A practical approach to CIM systems design. In: 4th International Conference on Computer Aided Production Engineering. Professional Engineering Publishing, pp. 91-98. ISBN 0852986823

Ijomah, Winifred L. and Childe, Stephen J. and Hammond, Geoffrey P. and McMahon, Christopher A. (2005) A robust description and tool for remanufacturing: a resource and energy recovery strategy. In: Fourth International symposium on environmentally concious design and inverse manufacturing. IEEE, pp. 472-479. ISBN 1-4244-0081-3

Ijomah, Winifred L. and Childe, Steve and McMahon, Chris (2004) Remanufacturing: a key strategy for sustainable development. In: Proceedings of the 3rd International Conference on Design and Manufacture for Sustainable Development. Cambridge University Press. ISBN 1-86058-470-5

King, A. and Ijomah, W.L. and McMahon, C.A. (2004) Reducing end-of-life waste: repair, recondition, remanufacture or recycle? In: Proceedings of the ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 28-October 2, 2004, Salt Lake City, Utah [CD-ROM]. American Society of Mechanical Engineers. ISBN 0791837424

Kokkonen, J. and Kuokkala, V-T and Olejnik, L. and Rosochowski, A. (2008) Dynamic behaviour of ECAP-processed aluminium at room and sub-zero temperature. In: Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics. Society for Experimental Mechanics. ISBN 0-912053-99-2

Kuokkala, V.T and Kokkonen, J. and Song, B. and Chen, W. and Olejnik, L. and Rosochowski, A. (2008) Dynamic response of severe plastic deformation processed 1070 aluminum at various temperatures. In: Proceedings of the 18th DYMAT Technical Meeting, The Behaviour of Bulk Nanomaterials and Metallic Glasses under Dynamic Loading. Nexter Munitions, La Chapelle, France. ISBN 2-9517947-3-8

Kwong, C. K. and Wong, T. C. (2008) A Neuro-Fuzzy approach to generating customer satisfaction model for new product development. In: 2008 IEEE International Conference on Industrial Engineering and Engineering Management. IEEM 2008. IEEE, pp. 1804-1808. ISBN 9781424426294

Mair, G.M. (1991) Industrial robotics and automation. In: Manufacturing Engineer's Reference Book. Butterworth - Heinemann, UK, pp. 73-87. ISBN 0 7506 1154 5

Mair, G.M. (1994) Industrial robotics and automation. In: Mechanical Engineer's Reference Book. Elsevier Butterworth - Heinemann, UK, 5/18-5/27. ISBN 0750642181; 9780750642187

Mair, G.M. (1993) Machine tool control elements. In: Manufacturing Engineer's Reference Book. Butterworth-Heinemann, UK, 12/1-12/20. ISBN 0 7506 1154 5

Mair, Gordon and Robinson, Andrew and Storr, John (2014) Applying augmented reality to the concept development stage of the total design methodology. In: Virtual, Augmented and Mixed Reality. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI, 8526 . Springer-Verlag, Berlin, pp. 414-425. ISBN 9783319074634 (In Press)

Pham, D.T. and Elkaseer, A.M. and Popov, K.P. and Dimov, S.S. and Olejnik, L. and Rosochowski, A. (2009) Micromiling of coarse-grained and ultrafine-grained Cu99.9E: Effects of material microstructure on machining conditions and surface quality. In: Proceedings of the International Conferences on Multi-Material Micro Manufacture (4M)/International Conferences on Micro Manufacturing (ICOMM). Professional Engineering Publishing, pp. 241-244.

Rosochowski, A. and Olejnik, L. (2009) Ultrafine grained metals in micro-manufacturing. In: Proceedings of the 2nd International Symposium on Bulk Nanostructured Materials: from fundamentals to innovations, BNM2009. Ufa State Aviation Technical University, Ufa, Russia. ISBN 978-5-86911-971-1

Rubio, Luis and De la Sen, Manuel (2006) Discrete-time model reference control schemes of milling forces using fractional order holds. Part I : known plant. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06. IEEE, Piscataway, New Jersey, pp. 1001-1004. ISBN 0780397584

Rubio, Luis and De la Sen, Manuel (2007) Optimization rules for mill cutter and cutting parameters selection incorporating a control algorithm. In: 12th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2007. IEEE, Piscataway, New Jersey, pp. 1421-1424. ISBN 9781424408252

Rubio, Luis and De la Sen, Manuel (2006) Selection of mill cutter and cutting parameters through an expert system. In: Advances in Computer, Information and Systems Sciences and Engineering. Springer, Netherlands, pp. 5-12. ISBN 9781402052606

Rubio, Luis and De la Sen, Manuel (2008) An expert mill cutter and cutting parameters selection system incorporating a control strategy. In: Proceedings of the 17th IFAC World Congress, 2008. International Federation of Automatic Control IFAC, COEX. The International Federation of Automatic Control. ISBN 9783902661005

Rubio, Luis and De la Sen, Manuel (2008) A procedure to obtain mill cutter and cutting parameters using parameter optimization under constraints and expert rules. In: IEEE International Conference on Control Applications, 2008. CCA 2008. IEEE, pp. 534-539. ISBN 9781424422227

Rubio, Luis and De la Sen, Manuel and Bilbao, Aitor (2007) Discrete-time adaptive control of milling forces using fractional order holds by on-line adjustment of the correcting gain. In: IEEE International Conference on Control Applications, 2007. IEEE, Piscataway, New Jersey, pp. 1330-1335. ISBN 9781424404421

Rubio, Luis and De la Sen, Manuel and Bilbao, Aitor (2007) Intelligent adaptive control of forces in milling processes. In: Mediterranean Conference on Control & Automation, 2007. IEEE, Piscataway, New Jersey, pp. 1-6. ISBN 9781424412815

Rubio, Luis and De la Sen, Manuel and Ibeas, Asier (2006) Discrete-time model reference control of milling forces under fractional order holds. Part II : extensions to adaptive control. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. IEEE, Piscataway, New Jersey, pp. 1005-1008. ISBN 0780397584

Rubio, Luis and De la Sen, Manuel and Ibeas, Asier (2006) Some aspects about milling : expert system for cutting parameters selection and control designs. In: Advances Technologies. ARS publishers, Germany. ISBN 9783866111974

Rubio, Luis and De la Sen, Manuel and Ibeas, Asier (2005) An expert mill cutter selection system. In: 10th IEEE Conference on Emerging Technologies and Factory Automation, 2005. IEEE, Piscataway, New Jersey, pp. 961-968. ISBN 0780394011

Rubio, Luis and Longstaff, Andrew and Fletcher, Simon and Myers, Alan and De la Sen, Manuel (2013) Control scheme for automatically controlling the milling system in between optimal working points. In: IEEE International Conference on Systems, Man and Cybernetics (SMC), 2013. IEEE, pp. 1628-1633.

Shih, J. and Banks, W.M. (2001) A study of the effects of manufacturing variables and solvents on the mechanical properties of carbon fibre composites. In: Design, Manufacturing and Application of Composites. Technomic Publishing Company, Lancaster, Pennsylvania, pp. 183-190. ISBN 9781587161148

Sun, Jining and Luo, Xichun (2014) Deterministic fabrication of micro- and nanostructures by focused ion beam. In: FIB Nanostructures. Lecture Notes in Nanoscale Science and Technology . Springer, pp. 161-204. ISBN 9783319028736

Whitfield, R.I. and Duffy, A.H.B. and Conway, Alastair and Wu, Zichao and Meehan, Joanne and Vassalos, Dracos and York, Philip (2007) A virtual environment to support the distributed design of large made-to-order products. In: Higher Creativity for Virtual Teams: Developing Platforms for Co-Creation. IGI Global, pp. 299-320.

Wood, J. (2005) The FENET plate/shell fabrication procedural benchmark and "round robin" exercise. In: Engineering Simulation: Best Practices and Visions of the Future, Proceedings of the NAFEMS World Congress 2005. NAFEMS.

Zhao, Jie (2015) The shaping of polymeric micro-tubes. In: Micro-Manufacturing Engineering and Technology. William Andrew, Norwich, NY. ISBN 9780323311496 (Submitted)

Conference or Workshop Item

Acur Bakir, Nuran and Binti Mustaffa Bakry, Faridah and Mendibil, Kepa (2013) Knowledge resources, management innovation and radical innovation. In: 20th International Product Development Management Conference “re-enchanting technology”, 2013-06-23 - 2013-06-25, Paris.

Anusas, Mike and Ingold, Tim (2013) Designing environmental relations : from opacity to textility. In: DRS OPENSiG Symposium. Good things and bad things: tricky objects, tricky people, tricky processes, 2013-06-10 - 2013-06-11, Nottingham.

Bititci, Umit and Kehoe, D.F. (1987) Implementing manufacturing strategy through the application of programmable control. In: MACON-2 Conference, 1987-05-01.

Bulgheroni, M. and D'Amico, E. and Bar-Heim, S. and Carus, D. and Harrison, C.S. and Marcellini, F. (2009) The SMILING project : prevention of falls by a mechatronic training device. In: The 2nd IASTED International Conference on Telehealth and Assistive Technology, TAT 2009, 2009-11-02 - 2009-11-04, Cambridge, Massachusetts. (Unpublished)

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, London.

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23, London.

Carus, D. and Hamilton, R. and Harrison, C.S. (2010) Motorised shoe mechanisms to apply chaotic perturbations for gait training. In: 1st International Conference on Applied Bionics & Biomechanics, ICABB-2010, 2010-10-14 - 2010-10-16, Venice, Italy.

Chase, Scott C. (2008) Virtual worlds as collaborative environments for design and manufacturing : from idea to product. In: 2nd International Workshop on Virtual Manufacturing, published in 5th INTUITION International Conference, 2008-10-08, Torino, Italy.

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18, Sheffield, UK.

Counsell, John M. and Haughton-Brown, Chris and Tuff, Simon (2009) Renewable power for lean desktops in media applications. In: IBC 2009 Conference, 2009-09-10 - 2009-09-15, Amsterdam.

Demirbag, Mehmet (1997) Competitive strategies of Turkish firms : a case study of manufacturing firms following Turkey's entry to the customs union. In: 24th Academy of International Business Conference, 1997-04-04 - 1997-04-05, Leeds.

Duffy, Alex H.B. and Harries, Stefan and Marzi, Jochen and Petz, Christoph and Wu, Zichao and , DMEM, University of Strathclyde, UK and , FRIENDSHIP SYSTEMS GmbH, Germany and , HSVA, Germany and , ZIB, Germany (2006) VIRTUE: integrating CFD ship design. In: 7th International Conference On Hydrodynamics, 2006-10-04 - 2006-10-06, Ischia, Italy.

Gijo, E. V. and Antony, Jiju and Kumar, Maneesh and McAdam, Rodney and Hernandez, Jose Luis (2014) An application of six sigma methodology for improving the first pass yield of a grinding process. In: UNSPECIFIED.

Goel, Saurav and Luo, Xichun and Stukowski, Alexander and Reuben, Robert L. (2012) Influence of nanoparticle coolant and crystal structure of the workpiece during nanometric cutting of silicon carbide. In: 12th euspen International Conference, 2012-06-04 - 2012-06-08, Stockholm.

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Olejnik, Lech and Pesci, Raphael (2014) Improving mechanical properties of magnesium alloy by incremental equal angular pressing (ECAP). In: 1st International Conference of Non-Ferrous Metals, ICNFM 2014, 2014-06-04 - 2014-06-06, Wisla. (Unpublished)

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Yakushina, Evgenia and Olejnik, Lech and Wood, Paul (2013) Mechanical properties of AZ31B magnesium alloy processed by I-ECAP. In: Magnesium Workshop Madrid 2013, 2013-05-21 - 2013-05-24, Madrid. (Unpublished)

Harrison, C.S. and Twist, R.J. and Hon, K.K.B. (1990) Simulation of the effects of uncertainty and its effects on production planning lead times. In: 6th International Conference on Computer Aided Production Engineering, 1990-11-01, Edinburgh.

Ijomah, W.L. and McMahon, C.A. and Hammond, G.P. and Newman, S.T. (2007) Enhancing product remanufacturability through design. In: 5th International Conference on Design and Manufacture for Sustainable Development, 2007-07-10 - 2007-07-11, Loughborough. (Unpublished)

Ijomah, Winifred L. and McMahon, Christopher A. and Hammond, Geoffrey P. and Newman, Stephen T. (2007) Development of a robust remanufacturing definition. In: 17th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2007), 2007-06-18 - 2007-06-20, Philadelphia, USA. (Unpublished)

Ijomah, Winifred L. and Newman, Stephen (2007) A reference model to verify and optimize remanufacturing operations. In: The 4th International Conference on Digital Enterprise Technology (DET 2007), 2007-09-19 - 2007-09-21, Bath, UK. (Unpublished)

Kokkonen, J. and Kuokkala, V-T and Seidt, J.D. and Walker, A. and Gilat, A. and Olejnik, L. and Rosochowski, A. (2009) High strain rate deformation analysis of UFG aluminum sheet samples. In: 2009 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2009-06-01 - 2009-06-04, Albuquerque, NM USA.

Krysinski, Adam and Coupland, Jeremy and Leach, Richard and Flockhart, Gordon M. H. (2014) A simple defect detection technique for high speed roll-to-roll manufacturing. In: 14th Euspen International Conference, 2014-06-02 - 2014-06-06, Dubrovnik. (Unpublished)

Lim, Theodore and Medellin, Hugo and Sung, Raymond C.W. and Ritchie, James M. and Corney, Jonathan (2009) Virtual bloXing - assembly rapid prototyping for near net shapes. In: World Conference on Innovative VR, 2009-02-25 - 2009-02-26, Chalon-sur-Saone, France.

Luo, Xichun (2010) Deterministic fabrication of nanostructures in plasmonics lens by focused ion beam (FIB). In: 10th euspen International Conference, 2010-05-31 - 2010-06-04, Delft.

Luo, Xichun (2010) Fabrication of micro fluidic mould by micromilling and laser deburring. In: 10th euspen International Conference, 2010-05-31 - 2010-06-04, Delft.

Luo, Xichun and Sun, J. (2008) A simulation study on tool wear in ultra precision diamond turning silicon. In: 8th euspen International Conference, 2008-05-18 - 2008-05-22, Zurich.

MacGregor, Steven P. and Bianchi, Mattia and Hernandez, Jose Luis and Mendibil, Kepa (2007) Towards the tipping point for social innovation. In: International Conference on Sustainable Innovation, 2007-10-29 - 2007-10-30, Surrey.

Maguire, Catherine and Bititci, U. and Ackermann, F. and Ates, Aylin and Bourne, M. and Davies, J. and Gibb, S. and MacBryde, Jillian C. and Mackay, D. and Shafti, F.S. and Van Der Meer, R.B. (2008) Learning to SEE : is scanning the external environment key to sustainability? In: 15th International Annual European Operations Management Association, EurOMA, 2008-01-01, Groningen, the Netherlands.

Nagel, Ulf and Kao, Chih-Chuan and Thomason, James (2013) Study on properties of composites reinforced by heat treated glass fibres simulating thermal recycling conditions. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02, Montréal.

Olejnik, L. and Rosochowski, A. (2008) Using ICFG guidelines for developing ECAP with enhanced productivity. In: 41st ICFG Plenary Meeting, 1900-01-01, Warsaw, Poland.

Pan, Wenke and Boyle, James and Mackenzie, Donald (2009) Simulation of the small punch creep test with consideration of variation of material properties. In: 17th UK Conference on Computational Mechanics, ACME UK, 2009-04-06 - 2009-04-08, London, UK.

Qin, Y. and Harrison, C.S. and Ma, Y. and Brockett, A. and Juster, N. and Uriarte, L. and Cuevas, A. and Eguia, J. (2007) Process and machine system development for the forming of miniature/micro sheet metal products. In: 7th Euspen International Conference, 2007-05-01, Bremen, Germany.

Qin, Yi (2013) Process chain and POLYTUBES micro-factory concept. In: The 8th International Conference on MicroManufacturing ICOMM 2013, 2013-03-25 - 2013-03-28, Victoria.

Qin, Yi and Perzon, Erik and Chronakis, Ioannis and Calderon, Ivan and Konrad, Konstantin and Hartl, Christoph and Holtkamp, Jens and Arentoft, Mogens and Larizza, Piero and Zhao, Jie (2013) Process Chain for the Manufacture of Polymeric Tubular Micro-Components and “POLYTUBES Micro-Factory” Concept. In: The 8th International Conference on MicroManufacturing ICOMM 2013, 2013-03-25 - 2013-03-28, Victoria.

Razali, Akhtar and Qin, Yi (2010) FE simulation of sheet-metal feeding in micro-forming. In: 21st International Computer-Aided Production Engineering Conference (CAPE 2010), 2010-04-13 - 2010-04-14, Edinburgh. (Unpublished)

Razali, Akhtar and Qin, Yi and Harrison, Colin and Brockett, Andrew (2008) Investigation of feeding devices and development of design considerations for a new feeder for micro-sheet forming. In: 6th International Conference on Manufacturing Research, ICMR 08, 2008-09-09 - 2008-09-11, London.

Razali, Akhtar and Qin, Yi and Zhao, Jie and Harrison, Colin (2009) Development of a linear-motor-driven feeder for micro-sheet-forming applications. In: International Conference on Manufacturing Research 2009, 2009-09-08 - 2009-09-10, Warwick, United Kingdom.

Rentizelas, Athanasios and Tolis, A. and Tatsiopoulos, Ilias P. (2005) Bioenergy supply chain optimization using multiple biomass sources. In: 14th European Biomass Conference and Exhibition, 2005-06-03, Paris.

Rentizelas, Athanasios and Tziralis, Georgios and Kirytopoulos, Konstantinos and Tatsiopoulos, I. P. (2006) A hybrid approach to investment decisions through genetic algorithm optimization & monte carlo simulation. In: 14th International Working Seminar on Production Economics – IGLS 2006, 2006-02-20 - 2006-02-24, Innsbruck.

Rosochowski, Andrzej (2014) Developments in incremental ECAP for manufacture of UFG metals. In: 1st International Conference of Non-Ferrous Metals, 2014-06-04 - 2014-06-06, Wisla. (Unpublished)

Rowell, William and Duffy, Alex H.B. and Boyle, I.M. and , Masson, Nick, Babcock Marine, Rosyth and , EPSRC and Babcock Marine (Funder) (2009) The nature of engineering change in a complex product development cycle. In: 7th Annual Conference on Systems Engineering Research, 2009-04-20 - 2009-04-23, Loughborough University.

Rubio, Luis and Longstaff, Andrew and Fletcher, Simon and Myers, Alan (2013) Towards an intelligent, open and modular control architecture for automating the milling process. In: 2nd Annual EPSRC Manufacturing the Future Conference, 2013-09-17 - 2013-09-18.

Rubio, Luis and Longstaff, Andrew and Fletcher, Simon and Myers, Alan (2013) Towards self-optimizing and self-adaptive milling processes. In: Lamdamap 10th International Conference, 2013-03-20 - 2014-03-21, Chester.

Rubio, Luis and Longstaff, Andrew and Fletcher, Simon and Myers, Alan (2013) An intelligent and modular adaptive control scheme for automating the milling process. In: NewTech 2013 Advanced Manufacturing Engineering and Technologies, 2013-10-27 - 2013-10-30, Stockholm.

Rudeiros Fernandez, Jose Luis and Thomason, James and Liggat, John and Soliman, M. (2013) Characterisation of the mechanical and thermal degradation behaviour of natural fibres for lightweight automotive applications. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02, Montréal.

Saez Rodriguez, Eduardo and Yang, Liu and Thomason, James (2013) Investigation of strength recovery of recycled heat treated glass fibres through chemical treatments. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02, Montréal.

Sun, Jining and Chang, Wenlong and Luo, Xichun (2009) Comparison of diamond drilling and laser drilling techniques in glass drilling for fabrication of MEMS. In: 9th euspen International Conference, 2009-06-02 - 2009-06-05, San Sebastain.

Sun, Jining and Hrncir, Tomas and Chang, Wenlong and Luo, Xichun (2009) FIB fabrication of three dimensional structured surfaces. In: 9th euspen International Conference, 2009-06-02 - 2009-06-05, San Sebastain.

Sun, Jining and Shu, Will and Luo, Xichun and Ritchie, James M. and Chang, Wenlong (2010) Fabrication of periodic metal nanodots array. In: ASPE 2010 Annual Meeting, 2010-10-31 - 2010-11-04, Atlanta.

Symington, Mark C. and David-West, Opukuro S. and Banks, W.M. and Thomason, J.L. and Pethrick, Richard A. (2008) Vacuum infusion of natural fibre composites for structural applications. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Symington, Mark C. and David-West, Opukuro S. and Banks, William M. and Thomason, J.L. and Pethrick, Richard A. (2008) The effect of alkalisation on the mechanical properties of natural fibres. In: 13th European Conference on Composite Materials (EECM 13), 2008-06-02 - 2008-06-05, Stockholm, Sweden.

Thomason, James and Yang, Liu (2013) Temperature dependence of the interfacial shear strength in glass reinforced polypropylene and epoxy composites. In: 19th International Conference on Composite Materials, 2013-07-28 - 2013-08-02, Montréal.

Tong, Zhen and Luo, Xichun (2013) An atomistic investigation of FIB process damage on diamond. In: euspen's 13th International Conference and Exhibition 2013, 2013-05-27 - 2013-05-31, Berlin.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Molter, Lars (2014) A techno-economic evaluation of friction stir welding of DH36 steel. In: 10th Friction Stir Welding Symposium, 10FSWS, 2014-05-20 - 2014-05-22, Beijing.

Weir, George and Anagnostou, N.K. (2007) Optimising content clarity for human-machine systems. In: Proceedings of the 10th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, 2007-09-04 - 2007-09-06, Seoul, Korea.

Wodehouse, Andrew and Sheridan, Marion (2014) Design for 'quality of use' : emotion and physical interface design. In: 8th International Conference on Interfaces and Human Computer Interaction 2014, 2014-07-15 - 2014-07-17, Lisbon.

Wood, J. (2004) Procedural benchmarks for common fabrication details in plate/shell structures. In: FENET Multi-physics and Analysis Workshop, 2004-03-25, Mallorca, Spain.

Wood, Paul and Qarni, Muhammad Jawad and Chippendale, John and Rosochowski, Andrzej (2013) Numerical study on the effect of the thermo-mechanical properties of alloys on the behaviour of super plastic forming tools. In: 9th EuroSPF Conference, 2013-09-09 - 2013-09-11, Speyer. (Unpublished)

Wood, Paul and Qarni, Muhammad Jawad and Rosochowski, Andrzej (2011) Effect of friction and back pressure on the formability of superplastically formed aluminium alloy sheet. In: SheMet Conference 2011, 2011-04-17 - 2011-04-20, Leuven.

Wu, Zichao and Duffy, Alex H.B. and Vassalos, Dracos and York, Philip and Whitfield, Ian (2007) Virtue Integrated Platform: holistic support for distributed ship hydrodynamic design. In: 16th International Conference on Engineering Design (ICED 07), 2007-08-28 - 2007-08-31, Paris, France.

Monograph

Macbryde, Jillian and Mendibil, Kepa and Paton, Steve and Davidson, Laura and Bititci, Umit (2009) Manufacturing in Scotland. Working paper. Strathclyde Institute for Operations Management, Glasgow, UK.

Patent

Rosochowski, A. (2014) Severe plastic deformation of metals. US8631673 B2.

Thomason, James (2014) Glass Fibre Recovery. PE955679GB.

Thesis

Maguire, Catherine (2010) An exploratory study of organisational transformation in manufacturing SMEs. PhD thesis, University Of Strathclyde.

This list was generated on Thu Aug 21 15:19:54 2014 BST.