Strathprints logo
Strathprints Home | Open Access | Browse | Search | User area | Copyright | Help | Library Home | SUPrimo

Items where subject is "Technology > Mining engineering. Metallurgy"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item type | No Grouping
Number of items at this level: 221.

Article

Abed, A. and Smith, A.C. and Hendry, A. (1995) The effect of nitrogen alloying on the densification process of a sialon ceramic-matrix composite containing stainless-steel. Materials Science and Engineering: A, 202 (1-2). pp. 218-225. ISSN 0921-5093

Abid, Muhammad and Parvez, Shahid and Nash, David (2013) Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding : A 3D simulation. International Journal of Pressure Vessels and Piping, 108-109. pp. 51-60. ISSN 0308-0161

Andrews, Nicola and Giourntas, Lampros Gerasimos and Galloway, Alexander and Pearson, Alastair (2014) Effect of impact angle on the slurry erosion-corrosion of Stellite 6 and SS316. WEAR, 320 (1-2). pp. 143-151. ISSN 0043-1648

Andrews, Nicola and Giourntas, Lampros Gerasimos and Galloway, Alexander and Pearson, Alastair (2015) Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316. International Journal of Refractory Metals and Hard Materials, 48. pp. 229-237. ISSN 0263-4368

Antonov, Maksim and Stack, Margaret and Hussainova, I. (2006) Erosion-corrosion of Cr3C2-Ni cermets in salt water. Proceedings of the Estonian academy of Science and Engineering, 12 (3-1). pp. 176-187. ISSN 1406-0175

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, 8 (8). pp. 651-655. ISSN N/K

Baker, Neville (2014) The role of zirconium in microalloyed steels. Materials Science and Technology. ISSN 0267-0836

Baker, T.N. (2009) Processes, microstructure and properties of vanadium microalloyed steels. Materials Science and Technology, 25 (9). pp. 1083-1107. ISSN 0267-0836

Baker, T.N. and Li, Y. and Wilson, J.A. and Carven, A.J. and Crowther, D.N. (2004) Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels. Materials Science and Technology, 20 (6). pp. 720-730. ISSN 0267-0836

Baker, T.N. and Selamat, M.S. (2008) Surface engineering of Ti-6Al-4V by nitriding and powder alloying using a CW CO2 laser. Materials Science and Technology, 24 (2). pp. 189-200. ISSN 0267-0836

Beyer, V. and Campbell, Stuart and Ramsey, Gemma and Galloway, Alexander and Moore, A.J. and McPherson, Norman (2013) Systematic study of effect of cross-drafts and nozzle diameter on shield gas coverage. Science and Technology of Welding and Joining, 18 (8). pp. 652-660. ISSN 1362-1718

Borggrafe, Andreas and Heiligers, Jeannette and Ceriotti, Matteo and McInnes, Colin (2014) Inverse problem for shape control of flexible reflectors using distributed solar pressure. Smart Materials and Structures, 23 (7). 075026. ISSN 0964-1726

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2010) Optimizing tack welding fabrication procedures using numerical finite element models. Journal of Ship Production and Design, 26 (2). pp. 117-134. ISSN 2158-2866

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2013) The applicability of using low transformation temperature welding wire to minimize unwanted residual stresses and distortions. International Journal of Pressure Vessels and Piping, 110. pp. 2-8. ISSN 0308-0161

Campbell, Stuart and Galloway, Alexander and Ramsey, Gemma and McPherson, Norman (2013) A computational fluid dynamic analysis of the effect of weld nozzle geometry changes on shielding gas coverage during gas metal arc welding. Journal of Manufacturing Science and Engineering, 135 (5). Article 051016. ISSN 1087-1357

Chacón-Nava, José G. and Martínez-Villafañe, Alberto and Almeraya-Calderón, F. and Cabral-Miramontes, J.A. and Stack, Margaret (2010) Some remarks on particle size effects on the abrasion of a range of Fe based alloys. Tribology International, 43 (8). pp. 1307-1317. ISSN 0301-679X

Chacón-Nava, José G. and Stott, F.H. and Stack, Margaret (1993) The effect of substrate hardness on the erosion-corrosion resistance of materials in low-velocity conditions. Corrosion Science, 35 (5-8). pp. 1045-1051. ISSN 0010-938X

Chen, Weihang and Chen, Haofeng (2013) Cyclic J-integral using the linear matching method. International Journal of Pressure Vessels and Piping, 108-109. pp. 72-80. ISSN 0308-0161

Chi, K. and McLean, M.S. and McPherson, N.A. and Baker, T.N. (2007) Single sided single pass submerged arc welding of austenitic stainless steel. Materials Science and Technology, 23 (9). pp. 1039-1048. ISSN 0267-0836

Donohue, L.A. and Lewis, D.B. and Munz, W.D. and Stack, M.M. and Lyon, S.B. and Wang, H.W. and Rafaja, D. (1999) The influence of low concentrations of chromium and yttrium on the oxidation behaviour, residual stress and corrosion performance of TiAlN hard coatings on steel substrates. Vacuum, 55 (2). pp. 109-114. ISSN 0042-207X

Ellul, B and Camilleri, Duncan and Betts, J (2013) A progressive failure analysis applied to fibre-reinforced composite plates subject to out-of-plane bending. Mechanics of Composite Materials, 49 (9). pp. 605-620. ISSN 0191-5665

Ewing, Helen and Hendry, Alan and Nash, David (2011) Finite element analysis applied to redesign of submerged entry nozzles for steelmaking. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (4). pp. 327-339. ISSN 1464-4207

Ewing, Helen and Yang, S. (2011) The effect of precursor composition and sintering additives on the formation of ß-sialon from Al, Si and Al2O3 powders. Ceramics International, 37 (5). pp. 1667-1673. ISSN 0272-8842

Galloway, A. and McPherson, Norman (2006) The effect of shielding gas composition on weld metal nitrogen retention in 316LN austenitic stainless steels. Welding and Cutting, 5 (4). pp. 225-230. ISSN 1612-3433

Galloway, Alexander and McGhie, W and McPherson, Norman (2013) Thin plate buckling mitigation and reduction challenges for naval ships. Journal of Marine Engineering & Technology, 12 (2). pp. 3-10. ISSN 1476-1548

Galloway, Alexander and McPherson, Norman and Baker, Thomas (2011) An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225 (2). pp. 61-69. ISSN 1464-4207

Galloway, Alexander and Sutherland, Peter F. and Longhurst, Gary (2012) Analysis of the integrity of a single stud assembly with externally corroded nuts. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (3). pp. 219-229. ISSN 1464-4207

Garcia, David and Trendafilova, Irina (2014) A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment : Application for delamination detection in composite materials. Journal of Sound and Vibration, 333 (25). pp. 7036-7050. ISSN 0022-460X

Gorash, Yevgen and Chen, Haofeng (2013) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). Materials Research Innovations, 17 (5). pp. 337-343. ISSN 1433-075X

Gorash, Yevgen and Chen, Haofeng (2013) Creep-fatigue life assessment of cruciform weldments using the linear matching method. International Journal of Pressure Vessels and Piping, 104. pp. 1-13. ISSN 0308-0161

Gorash, Yevgen and Chen, Haofeng (2013) On creep-fatigue endurance of TIG-dressed weldments using the linear matching method. Engineering Failure Analysis, 34. pp. 308-323. ISSN 1350-6307

Gzyl, Michal Zbigniew and Rosochowski, Andrzej and Pesci, Raphael and Olejnik, Lech and Yakushina, Evgenia and Wood, Paul (2014) Mechanical properties and microstructure of AZ31B magnesium alloy processed by I-ECAP. Metallurgical and Materials Transactions A, 45 (3). pp. 1609-1620. ISSN 1073-5623

Hamilton, Niall Robert and Wood, James and Galloway, Alexander and Olsson Robbie, Mikael and Zhang, Yuxuan (2013) The metallurgy, mechanics, modelling and assessment of dissimilar material brazed joints. Journal of Nuclear Materials, 432 (1-3). pp. 42-51. ISSN 0022-3115

Hodge, C. and Stack, Margaret (2010) Tribo-corrosion mechanisms of stainless steel in soft drinks. WEAR, 270 (1-2). pp. 104-114. ISSN 0043-1648

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2014) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part I - melt features. Materials Science and Technology, 30 (10). pp. 1209-1213. ISSN 0267-0836

Idriss, A.N. and Mridha, Shahjahan and Baker, neville (2014) Laser and GTAW torch processing of Fe-Cr-B coatings on steel : Part II - microstructure and hardness. Materials Science and Technology. ISSN 0267-0836 (In Press)

Jana, B. and Stack, M.M. (2005) Modelling impact angle effects on erosion-corrosion of pure metals. WEAR, 259 (1-6). pp. 243-255. ISSN 0043-1648

Jana, Buddhadev and Stack, Margaret (2011) A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. WEAR, 270 (7-8). pp. 439-445. ISSN 0043-1648

Jiang, Jiaren and Stack, Margaret and Neville, Anne (2002) Modelling the tribo-corrosion interaction in aqueous sliding conditions. Tribology International, 35 (10). pp. 669-679. ISSN 0301-679X

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) Characterization of wear scar surfaces using combined three-dimensional topographic analysis and contact resistance measurements. Tribology International, 30 (7). pp. 517-526. ISSN 0301-679X

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1994) Some frictional features associated with the sliding wear of the nickel-base alloy N80A at temperatures to 250 °C. WEAR, 176 (2). pp. 185-194. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (1997) The effect of partial pressure of oxygen on the tribological behaviour of a nickel-based alloy, N80A, at elevated temperatures. WEAR, 203-204. pp. 615-625. ISSN 0043-1648

Jiang, Jiaren and Stott, F.H. and Stack, Margaret (2004) A generic model for dry sliding wear of metals at elevated temperatures. WEAR, 256 (9/10). pp. 973-985. ISSN 0043-1648

Kakaie-Lafdaini, Mohammad Hadi and Ghadiri-Zahrani, Ismaeil and Galloway, Alexander (2014) Optimization study of weld geometry in the tandem submerged arc welding process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (In Press)

Koop, G.M. and Tole, Lise (2008) What is the environmental performance of firms overseas? An empirical investigation of the global gold mining industry. Journal of Productivity Analysis, 30 (2). pp. 129-143. ISSN 0895-562X

Li, Y. and Crowther, D. and Wilson, J.A. and Craven, A.J. and Baker, T.N. (2001) Precipitation in vanadium and vanadium-titanium microalloyed steels. Institute of Physics Conference Series, 168. pp. 183-187. ISSN 0951-3248

Li, Y. and Crowther, D.N. and Green, M.J.W. and Mitchell, P.S. and Baker, T.N. (2001) The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ International, 41 (1). pp. 46-55. ISSN 0915-1559

Li, Y. and Wilson, J.A. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2004) The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels. ISIJ International, 44 (6). pp. 1093-1102. ISSN 0915-1559

Li, Y. and Baker, T.N. (2010) Effect of the morphology of the martensite-austenite phase on fracture of the weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology, 26 (9). pp. 1029-1040. ISSN 0267-0836

Li, Y. and Baker, T.N. and Mitchell, P.S. (2005) Vanadium microalloyed steel for thin slab casting and direct rolling. Materials Science Forum, 500-501. pp. 237-244. ISSN 0255-5476

Li, Y. and Milbourn, D. and Baker, Thomas (2011) Effect of Vanadium microalloying on the HAZ microstructure and properties of low carbon steels. Journal of Iron and Steel Research International, 18 (Supple). pp. 393-403. ISSN 1006-706X

Li, Y. and Wilson, J.A. and Craven, A.J. and Mitchell, P.S. and Crowther, D. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging: Part I - Processing parameters, mechanical properties and microstructure. Materials Science and Technology, 23 (5). pp. 509-518. ISSN 0267-0836

Liu, H. and Stack, M.M. and Lyon, S.B. (1998) Reactive element effects on the ionic transport processes in Cr2O3 scales. Solid State Ionics, 109 (3-4). pp. 247-257. ISSN 0167-2738

Lu, Q. and Stack, M.M. and Wiseman, C.R. (2001) AC impedence spectroscopy as a technique for investigating corrosion of iron in hot flowing Bayer liquors. Journal of Applied Electrochemistry, 31 (12). pp. 1373-1379. ISSN 0021-891X

Lu, Q and Stack, M M and Wiseman, C R (2000) Corrosion behaviour and characterisation of iron in hot flowing Bayer liquors. Materials and Corrosion-Werkstoffe und Korrosion, 51 (10). pp. 705-711. ISSN 0947-5117

Macdonald, Martin and Rhodes, James and Heiyantuduwa, M.A. (2008) Recent developments in the design of cold-formed steel members and structures. Thin-Walled Structures, 46 (7-9). pp. 1047-1053. ISSN 0263-8231

Macdonald, Martin and Rhodes, James and Kotelko, Maria (2007) Stainless steel stub columns subject to combined bending and axial loading. Thin-Walled Structures, 45 (10-11). pp. 893-897. ISSN 0263-8231

Mackenzie, Donald and Li, Hongjun and Hamilton, Robert (2013) Multiphysics models for friction stir welding simulation. International Journal of CFD Case Studies, 10. pp. 19-30. ISSN 1642-236X

Maltin, Charles and Galloway, Alexander and Mweemba, M (2014) Alternative nickel based filler metals for use in the girth welding of bi-metallic pipelines. Metallurgical and Materials Transactions A. ISSN 1073-5623 (Submitted)

Maltin, Charles and Galloway, Alexander and Mweemba, M (2014) Microstructural evolution of Inconel 625 and Inconel 686CPT weld metal for clad carbon steel linepipe joints : A comparator study. Metallurgical and Materials Transactions A, 45A. pp. 3519-3532. ISSN 1073-5623

Maltin, Charles and Nolton, Lauren J. and Scott, Jamie L. and Toumpis, Athanasios and Galloway, Alexander (2014) The potential adaptation of stationary shoulder friction stir welding technology to steel. Materials and Design, 64. pp. 614-624. ISSN 0261-3069

Mathew, M.T. and Matijevic, B. and Stack, Margaret and Rocha, L.A. and Ariza, E. (2008) Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: Mechanisms, maps, materials selection. Tribology International, 41 (2). pp. 141-149. ISSN 0301-679X

McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Hambling, S.J. (2013) Friction stir welding of thin DH36 steel plate. Science and Technology of Welding and Joining, 18 (5). pp. 441-450. ISSN 1362-1718

Md Mahbubur Rahman, M and Xu, Yixiang and Lim, James and Switzer, Christine and Hamilton, Robert and Comlekci, Tugrul and Pritchard, D. (2013) Behaviour of steel portal frames in fire : Comparison of implicit and explicit finite element methods. International Journal of Structural Stability and Dynamics, 13 (4). ISSN 0219-4554

Mridha, S. and Baker, T.N. (2007) Incorporation of 3 μm SiCp into Titanium surfaces using a 2.8 kW laser beam of 186 and 373 MJ m-2 energy densities in a nitrogen environment. Journal of Materials Processing Technology, 185 (1-3). pp. 38-45. ISSN 0924-0136

Mridha, Shahjahan and Baker, Neville (2014) Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces. Materials Science and Technology. ISSN 0267-0836

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2012) Incorporation of TiC on Alsi 4340 low alloy steel surfaces via tungsten inert gas arc melting. Advanced Materials Research, 445. pp. 655-660. ISSN 1022-6680

Mridha, Shahjahan and Idriss, A.N. and Maleque, M.A. and Jaacob, I.L. and Baker, Neville (2014) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology. ISSN 0267-0836

Munoz De Escalona, Patricia and Maropoulos, Paul G. (2014) A geometrical model for surface roughness prediction when face milling Al 7075-T7351 with square insert tools. Journal of Manufacturing Systems. ISSN 0278-6125

Muscat, Martin and Camilleri, Duncan (2013) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. International Journal of Pressure Vessels and Piping, 108-109. pp. 61-66. ISSN 0308-0161

Pan, Wenke and Boyle, James and Ramlan, Mohd. and Dun, C. and Ismail, Mohd. and Hakoda, K. (2011) Material plastic properties characterization using a generic algorithm and finite element method modelling of the plane strain small punch test. Czech Metallurgican Journal, LXIII. pp. 174-179. ISSN None

Parvez, Shahid and Abid, Muhammad and Nash, David and Fawad, H. and Galloway, Alexander (2013) Effect of torch angle on arc properties and weld pool shape in stationary GTAW. Journal of Engineering Mechanics, 139 (9). pp. 1268-1277. ISSN 0733-9399

Patel, P and Mridha, Shahjahan and Baker, neville (2014) Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique. Materials Science and Technology, 30 (12). pp. 1506-1514. ISSN 0267-0836

Purandare, Yashodhan and Ehiasarian, A.P. and Stack, Margaret and Hovsepian, P. (2010) CrN/NbN coatings deposited by HIPIMS : A preliminary study of erosion-corrosion performance. Surface and Coatings Technology, 204 (8). pp. 1158-1162. ISSN 0257-8972

Purandare, Yashodhan and Stack, Margaret and Hovsepian, P. (2005) A study of the erosion-corrosion of PVD CrN/Nb superlattice coatings in aqueous slurries. WEAR, 259 (1-6). pp. 256-262. ISSN 0043-1648

Rasool, Ghulam and Stack, Margaret (2014) Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribology International, 74. pp. 93-102. ISSN 0301-679X

Reese, Jason (1997) Characterisation of the flow in the molten metal sump during direct chill aluminium casting. Metallurgical and Materials Transactions B, 28 (3). pp. 491-499. ISSN 1073-5615

Rosochowski, A. and Olejnik, L. (2009) Ultrafine grains - a new option for light metals. Materials Technology, 24 (3). pp. 139-142. ISSN 1066-7857

Roy, Mannish and Pauschitz, A. and Stack, Margaret (2010) Guest Editorial: Tribocorrosion 2009: East meets West. Tribology International, 43 (7). pp. 1201-1202. ISSN 0301-679X

Schnier, Gladys and Wood, James and Galloway, Alexander (2014) Investigating the effects of process variables on the residual stresses of weld and laser cladding. Advanced Materials Research, 996. pp. 481-487. ISSN 1022-6680

Selamat, M.S. and Baker, T.N. and Watson, L.M. (2001) Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment. Journal of Materials Processing Technology, 113 (1-3). pp. 509-515. ISSN 0924-0136

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2003) XRD and XPS studies on surface MMC layer of SiC reinforced Ti-6Al-4V alloy. Journal of Materials Processing Technology, 142 (3). pp. 725-737. ISSN 0924-0136

Selamat, M.S. and Watson, L.M. and Baker, T.N. (2006) XRD and XPS studies of surface MMC layers developed by laser alloying Ti6Al4V using a combination of a dilute nitrogen environment and SiC powder. Surface and Coatings Technology, 201 (3-4). pp. 724-736. ISSN 0257-8972

Stack, M.M. and Chi, K. (2002) Effect of preferential dissolution on erosion-corrosion for chromium steel in alkali slurry. Transactions of the Non-Ferrous Metal Society of China, 12 (5). pp. 931-935. ISSN 1003-6326

Stack, M.M. and Chi, K. (2003) Mapping sliding wear of steels in aqueous conditions. WEAR, 255 (1-6). pp. 456-465. ISSN 0043-1648

Stack, M.M. and James, J.S. and Lu, Q. (2004) Erosion-corrosion of chromium steel in a rotating cylinder electrode system: some comments on particle size effects. WEAR, 256 (5). pp. 557-564. ISSN 0043-1648

Stack, M.M. and Jana, B. (2004) Modelling particulate erosion-corrosion in aqueous slurries: some views on the construction of erosion maps for a range of pure metals. WEAR, 256 (9-10). pp. 986-1004. ISSN 0043-1648

Stack, M.M. and Mathew, M.T. (2003) Micro-abrasion transitions for metallic materials. WEAR, 255 (1-6). pp. 14-22. ISSN 0043-1648

Stack, M.M. and Mathew, M.T. (2004) Some comments on micro-abrasion interactions for pure metals in bio-oils. Journal of Synthetic Lubrication, 21 (2). pp. 105-118. ISSN 0265-6582

Stack, M.M. and Mathew, M.T. (2005) Transitions in microabrasion mechanisms for WC - Co (HVOF) coated steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 49-57. ISSN 1350-6501

Stack, M.M. and Pungwiwat, N. (2004) Erosion-corrosion mapping of Fe in aqueous slurries: some views on a new rationale for defining the erosion-corrosion interaction. WEAR, 256 (5). pp. 565-576. ISSN 0043-1648

Stack, M M (1999) Looking beyond the millennium : critical issues in the evaluation of materials performance for resistance to erosive wear in corrosive conditions. WEAR, 235. pp. 484-496. ISSN 0043-1648

Stack, M M and Corlett, N and Zhou, S (1997) A methodology for the construction of the erosion-corrosion map in aqueous environments. WEAR, 203. pp. 474-488. ISSN 0043-1648

Stack, M M and Pena, D (1997) Solid particle erosion of Ni-Cr/WC metal matrix composites at elevated temperatures : construction of erosion mechanism and process control maps. WEAR, 203. pp. 489-497. ISSN 0043-1648

Stack, M.M. and Abd El-Badia, T.M. (2008) Some comments on mapping the combined effects of slurry concentration, impact velocity and electrochemical potential on the erosion–corrosion of WC/Co–Cr coatings. WEAR, 264 (9-10). pp. 826-837. ISSN 0043-1648

Stack, M.M. and Abdelrahman, M. and Jana, B. (2010) A new methodology for modelling erosion–corrosion regimes on real surfaces : Gliding down the galvanic series for a range of metal-corrosion systems. WEAR, 268 (3-4). pp. 533-542. ISSN 0043-1648

Stack, M.M. and Abdelrahman, Shehab (2011) A CFD model of particle concentration effects on the erosion-corrosion of Fe in aqueous conditions. WEAR, 273 (1). pp. 38-42. ISSN 0043-1648

Stack, M.M. and Abdulrahmen, G.H. (2010) Mapping erosion-corrosion of carbon steel in oil exploration conditions : some new approaches to characterizing mechanisms and synergies. Tribology International, 43 (7). pp. 1268-1277. ISSN 0301-679X

Stack, M.M. and Bray, L. (1995) Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion—corrosion maps and computer graphics. WEAR, 186-187 (1). pp. 273-283. ISSN 0043-1648

Stack, M.M. and Corlett, N. and Zhou, S. (1996) Construction of erosion-corrosion maps for erosion in aqueous slurries. Materials Science and Technology, 12 (8). pp. 662-672. ISSN 0267-0836

Stack, M.M. and Lekatos, S. and Stott, F.H. (1995) Erosion-corrosion regimes : number, nomenclature and justification? Tribology International, 28 (7). pp. 445-451. ISSN 0301-679X

Stack, M.M. and Pungwiwat, N. (1999) Slurry erosion of metallics, polymers, and ceramics : particle size effects. Materials Science and Technology, 15 (3). pp. 337-344. ISSN 0267-0836

Stack, M.M. and Wang, H.W. and Munz, W.D. (1999) Some thoughts on the construction of erosion-corrosion maps for PVD coated steels in aqueous environments. Surface and Coatings Technology, 113 (1-2). pp. 52-62. ISSN 0257-8972

Stack, M.M. and Zhou, S. and Newman, R.C. (1996) Effects of particle velocity and applied potential on erosion of mild steel in carbonate/bicarbonate slurry. Materials Science and Technology, 12 (3). pp. 261-268. ISSN 0267-0836

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) A CFD model of erosion-corrosion of Fe at elevated temperatures in aqueous environments. Advances in Science and Technology (72). pp. 75-86. ISSN 1662-8969

Stack, Margaret and Abdelrahman, Shehab and Jana, Buddhadev (2010) Some perspectives on modelling the effect of temperature on the erosion-corrosion of Fe in aqueous conditions. Tribology International, 43 (12). pp. 2279-2297. ISSN 0301679X

Stack, Margaret and Abdulrahman, Ghaith (2012) Mapping erosion-corrosion of carbon steel in oil-water solutions : Effect of velocity and applied potential. WEAR, 274-275. pp. 401-413. ISSN 0043-1648

Stack, Margaret and Antonov, Maksim and Hussainova, Irina (2006) Some views on the erosion-corrosion response of bulk chromium carbide based cermets. Journal of Physics D: Applied Physics, 39 (15). pp. 3165-3174. ISSN 0022-3727

Stack, Margaret and Chacón-Nava, José G. and Jordan, M.P. (1996) Elevated temperature erosion of range of composite layers of Ni-Cr based functionally graded material. Materials Science and Technology, 12 (2). pp. 171-177. ISSN 0267-0836

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments at elevated temperatures. WEAR, 180 (1-2). pp. 91-99. ISSN 0043-1648

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1995) Synergism between effects of velocity, temperature, and alloy corrosion resistance in laboratory simulated fluidised bed environments. Materials Science and Technology, 11 (11). pp. 1180-1185. ISSN 0267-0836

Stack, Margaret and Corlett, N. and Turgoose, S. (1999) Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions. WEAR, 233-235. pp. 535-541. ISSN 0043-1648

Stack, Margaret and Corlett, N. and Turgoose, S. (2003) Some thoughts on modelling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries. WEAR, 255 (1-6). pp. 225-236. ISSN 0043-1648

Stack, Margaret and Hong, Ting-Fu and Wang, Hsin-Chun and Wang, Moo-Chin and Li, Wang-Long (2010) On the construction of wear maps for Y-TZP dental ceramics in aqueous environments: pH, exposure time and impact angle effects. Tribology International, 43 (12). pp. 2258-2267. ISSN 0301-679X

Stack, Margaret and Jawan, H. and Mathew, M.T. and Mathew, Mathew T (2005) On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments. Tribology International, 38 (9). pp. 848-856. ISSN 0301-679X

Stack, Margaret and Mathew, Mathew T and Hodge, C. (2011) Micro-abrasion-corrosion interactions of Ni-Cr/WC based coatings : Approaches to construction of tribo-corrosion maps for the abrasion-corrosion synergism. Electrochimica Acta, 56 (24). pp. 8249-8259. ISSN 0013-4686

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) Computer simulation of the effect of pre-oxidation in erosion-corrosion environments. Journal of Physics D: Applied Physics, 25 (1A). A170-A176. ISSN 0022-3727

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion–corrosion of preoxidised Incoloy 800H in fluidised bed environments : effects of temperature, velocity, and exposure time. Materials Science and Technology, 7 (12). pp. 1128-1137. ISSN 0267-0836

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) High temperature erosion of preoxidized and as received alloys : effects of impact angle, temperature and hot hardness. Materials at High Temperatures, 9 (3). pp. 153-159. ISSN 0960-3409

Stack, Margaret and Stott, F.H. and Wood, G.C. (1993) Review of mechanisms of erosion-corrosion of alloys at elevated temperatures. WEAR, 162-164 (B). pp. 706-712. ISSN 0043-1648

Stack, Margaret and Stott, F.H. and Wood, G.C. (1992) The effect of pre-oxidation of chromia and alumina forming alloys on erosion in laboratory simulated fluidized-bed conditions. Corrosion Science, 33 (6). pp. 965-983. ISSN 0010-938X

Stack, Margaret and Wang, H.W. (1999) Simplifying the erosion-corrosion mechanism map for the erosion of thin coatings in aqueous slurries. WEAR, 233-235. pp. 542-551. ISSN 0043-1648

Stott, F.H. and JORDAN, M P and LEKATOS, S and Stack, Margaret and Wood, G.C. (1995) The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperature. WEAR, 186 (1). pp. 291-298. ISSN 0043-1648

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1995) A mathematical model for sliding wear of metals at elevated temperatures. WEAR, 181-183 (1). pp. 20-31. ISSN 0043-1648

Stott, F.H. and LEKATOS, S and JORDAN, M P and Wood, G.C. and Stack, Margaret (1995) The interactions of sulphidation and particle erosion at high temperatures. Materials and Corrosion-Werkstoffe und Korrosion, 46 (5). pp. 261-270. ISSN 0947-5117

Telfer, C.G. and Stack, Margaret and Jana, Buddhadev (2012) Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries. Tribology International, 53. pp. 35-44. ISSN 0301-679X

Tingey, Christopher and Galloway, Alexander and Toumpis, Athanasios and Cater, Stephen R. (2015) Effect of tool centreline deviation on the mechanical properties of friction stir welded DH36 steel. Materials and Design, 65. pp. 896-906. ISSN 0261-3069

Toumpis, Athanasios and Galloway, Alexander and Arbaoui, Larbi and Poletz, Nicolas (2014) Thermomechanical deformation behaviour of DH36 steel during friction stir welding by experimental validation and modelling. Science and Technology of Welding and Joining, 19 (8). pp. 653-663. ISSN 1362-1718

Toumpis, Athanasios and Galloway, Alexander and McPherson, Norman and Cater, Stephen R. (2014) Development of a process envelope for friction stir welding of DH36 steel : A step change. Materials and Design, 62. pp. 64-75. ISSN 0261-3069

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-Formed Steel Sections with Web Openings Subjected to Web Crippling under Two-Flange Loading Conditions — Part I : Tests and Finite Element Analysis. Thin-Walled Structures, 56. pp. 38-48. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions — Part II : Parametric study and proposed design equations. Thin-Walled Structures, 56. pp. 79-87. ISSN 0263-8231

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Structures, 50 (1). pp. 76-86. ISSN 0263-8231

Uzzaman, Asraf and Wrzesien, Andrzej M. and Hamilton, Robert and Lim, James and Nash, David (2014) FE-assisted design of cold-formed steel top-hat purlins. Computers and Structures. ISSN 0045-7949 (Submitted)

Wang, H.W. and Stack, M.M. and Lyon, S.B. and Hovsepian, P. and Munz, W.D. (2001) Preferential erosive wear of droplet particles for cathodic arc/unbalanced magnetron sputtering CrN.NbN superlattice PVD coatings. Journal of Materials Science Letters, 20 (6). pp. 547-550. ISSN 0261-8028

Wang, H W and Stack, M M (2000) The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles. Journal of Materials Science, 35 (21). pp. 5263-5273. ISSN 0022-2461

Wang, H.W. and Stack, M.M. (1998) Corrosion of PVD TiN coatings under simultaneous erosion in sodium carbonate bicarbonate buffered slurries. Surface and Coatings Technology, 105 (1-2). pp. 141-146. ISSN 0257-8972

Wang, H.W. and Stack, M.M. (1998) Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buffer slurries containing alumina particles. Surface and Coatings Technology, 106 (1). pp. 1-7. ISSN 0257-8972

Wang, H.W. and Stack, M.M. (1999) The slurry erosive wear of physically vapour deposited TiN and CrN coatings under controlled corrosion. Tribology letters, 6 (1). pp. 23-36. ISSN 1023-8883

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2007) Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging. Part 2 - chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, 23 (5). pp. 519-527. ISSN 0267-0836

Zhang, B. and Baker, T.N. (2004) Effect of heat treatment on the hot deformation behaviour of AA6082 alloy. Journal of Materials Processing Technology, 153-154. pp. 881-885. ISSN 0924-0136

Zhang, J. and Baker, T.N. (2003) Effect of equalisation time on the austenite grain size of simulated thin slab direct charged (TSDC) vanadium microalloyed steels. ISIJ International, 43 (12). pp. 2015-2022. ISSN 0915-1559

Zhang, Yuxuan and Galloway, Alexander and Wood, James and Olsson Robbie, Mikael and Easton, David and Zhu, Wenzhong (2014) Interfacial metallurgy study of brazed joints between tungsten and fusion related materials for divertor design. Journal of Nuclear Materials, 454 (1-3). pp. 207-216. ISSN 0022-3115

Zhou, S and Stack, M M and Newman, R C (1996) Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions. Corrosion Science, 38 (7). pp. 1071-1084. ISSN 0010-938X

Zhou, S. and Stack, M.M. and Newman, R.C. (1996) Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corrosion - Houston Tx, 52 (12). pp. 934-946. ISSN 0010-9312

Zhou, Xingguo and Mackenzie, Donald and Fu, Ruidong (2014) Identifying plastic properties of friction stir-welded material by small punch beam test. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 228 (3). pp. 201-207. ISSN 1464-4207

Zhou, Xingguo and Pan, Wenke and Mackenzie, Donald (2013) Identifying friction stir welding process parameters through coupled numerical and experimental analysis. International Journal of Pressure Vessels and Piping, 108-109 (Aug-Se). 2–6. ISSN 0308-0161

Book

Gray, Thomas and Camilleri, Duncan (2011) Using computationally efficient, reduced-solution methods to understand welding distortion. Woodhead Publishing Ltd, Cambridge, UK, pp. 124-165. ISBN 9780857092908

Gray, Thomas and Camilleri, Duncan and McPherson, Norman (2014) Control of welding distortion in thin plate fabrication : Design support exploiting computational simulation. Welding and Other Joining Technologies . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9780857090478

Book Section

Baker, T.N. (2001) Quantitative metallography using transmission electron microscopy. In: 5th International Conference on Quantitive Microscopy of High Temperature Materials 2001. Maney Publishing, pp. 161-189. ISBN 1861251092

Baker, T.N. (2010) Laser surface modification of Ti alloys. In: Surface Engineering of Light Alloys - Aluminium, Magnesium and Titanium Alloys. Woodhead Publications, Cambridge, UK, pp. 398-443. ISBN 1-84569-537-2

Bewick, Russell and Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Usage of asteroid resources for space-based geoengineering. In: Asteroids. Springer Berlin Heidelberg, pp. 581-604. ISBN 978-3-642-39243-6

Blau, Peter and Stack, Margaret and Wood, Robert and Mischler, Stefano and Jiang, Jiaren and Drees, Dirk and Rocha, Luis and Wimmer, Marcus and Celis, Jean-Pierre and Cowan, Rick (2013) Future Needs for Tribo-Corrosion Research and Testing. In: Tribo-Corrosion. ASTM International, pp. 1-13.

Chacón-Nava, José G. and Almeraya-Calderón, F. and Orozco-Carmona, V.M. and Martínez-Villafañe, Alberto and Stack, Margaret (2012) Erosion-corrosion of carbon steel and 310 stainless steel at low impact velocities : Effect of erodent particle type. In: VIII Latincorr 2012. National Association of Corrosion Engineers, NACE.

Galloway, A. and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic steel welds. In: FabTech International Conference. Society of Manufacturing Engineers, pp. 281-283.

Gorash, Yevgen and Chen, Haofeng (2013) Linear matching method for parametric studies of weldments creep-fatigue endurance. In: ASME 2013 Pressure Vessels and Piping Conference. ASME, PVP2013-97221. ISBN 978-0-7918-5570-6

Li, Y. and Crowther, D. and Mitchell, P.S. and Baker, T.N. (2002) Evolution of precipitation in direct charged thin slab cast VoN and V-Ti-N steels. In: Proceedings of the Institute of Physics Conference: Electron Microscopy and Analysis Group Conference. Institute of Physics Conference series, 168 (11). Institute of Physics, Bristol, United Kingdom. ISBN 0750308125

Macdonald, Martin and Heiyantuduwa, M.A. and Rhodes, James (2006) Finite element analysis of web crippling behaviour of cold-formed steel flexural members. In: Proceedings of the 18th International Speciality Conference on Cold Formed Steel Structures. University of Missouri-Rolla.

Manoach, Emil and Trendafilova, Irina (2010) Damage detections in nonlinear vibrating thermally loaded plates. In: Materials with complex behaviour. Advanced Structural Materials . Springer-Verlag, Berlin Heidelberg, pp. 193-211. ISBN 9783642126673

Sanchez Cuartielles, Joan-Pau and McInnes, Colin (2013) Available asteroid resources in the Earth's neighbourhood. In: Asteroids. Springer Berlin Heidelberg, pp. 439-458. ISBN 978-3-642-39243-6

Schnier, Gladys and Wood, James and Galloway, Alexander (2014) An experimental validation of residual stresses in weld clad pipelines. In: Research and Applications in Structural Engineering, Mechanics & Computation. Taylor and Francis, CRC Press, pp. 613-617. ISBN 978-1-138-00061-2

Sing, W. and Baker, T.N. (2002) Dry sliding wear behaviour of AA2014 alloy and AA2618 aluminium based composites. In: Proceedings of 1st International Conference on Materials Processing for Properties and Performance. UNSPECIFIED.

Smith, A. and Abed, A. and Edrees, H.J. and Hendry, A. (1994) Ceramic-matrix composites of silicon-nitride with conducting particles. In: Silicon Nitride 93: proceedings of the international conference on silicon nitride-based ceramics, Stuttgart, October 4-6, 1993. Key Engineering Materials, 89-91 . Trans Tech Publications, Aedermannsdorf, Switzerland, pp. 423-428. ISBN 0-87849-668-8

Stack, Margaret and Crawley, Joshua and Miller, Mark (2013) An approach to mapping the erosion-corrosion of stainless steel : Applications to tidal energy systems. In: Tribo-Corrosion. ASTM International, pp. 1-28.

Stack, Margaret and Jana, Buddhadev and Abdelrahman, Shehab (2011) Models and mechanisms of erosion-corrosion in metals. In: Tribocorrosion of Passive Metals and Coatings. Tribocorrosion of Passive Metals and Coatings . Woodhead Publishing Ltd, Cambridge, UK. ISBN 9781845699666

Stack, Margaret and Pena, D. (1997) Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites. In: Microscopy of Oxidation. Institute of Materials, London, UK, pp. 757-765. ISBN 9781861250346

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments. In: Heat Resistant Materials. ASM International, Ohio, USA, pp. 333-342. ISBN 978-0871704290

Stott, F.H. and Jiang, Jiaren and Stack, Margaret (1997) Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys. In: Advances in Surface Engineering. Advances in Surface Engineering, 1 . Royal Society of Chemistry, Cambridge, UK, pp. 143-157. ISBN 0854047475

Stott, F.H. and Stack, Margaret and Wood, G.C. (1991) The role of oxides in the erosion-corrosion of alloys in low velocity conditions. In: Corrosion-Erosion-Wear of Materials at Elevated Temperatures. National Association of Corrosion Engineers, NACE, Houston, Texas, Article 12, 1-16.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Research Publishing Services, National University of Singapore, Singapore, pp. 179-186. ISBN 978-981-07-2615-7

Wang, H.W. and Stack, Margaret (1997) Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries. In: Proceedings of the World Tribology Congress. Bookcraft Ltd, Bath, UK, p. 215. ISBN 978-1-86058-109-0

Wilson, J.A. and Craven, A.J. and Li, Y. and Baker, T.N. (2002) Nanoanalysis of dispersion strengthening particles in thin slab cast vanadium microalloyed steels. In: Proceedings of the Institute of Physics Electron Microscopy and Analysis Group (EMAG 2001 Conference). EMAG Conference Series, 168 . Institute of Physics, London, United Kingdom, pp. 187-190. ISBN 0-7503-0812-5

Conference or Workshop Item

Abdulrahman, Ghaith and Stack, M.M. (2010) Erosion-corrosion maps for carbon steel in crude oil/water slurries : Impact angle and applied potential effects. In: 11th Mediterranean Petroleum Conference and Exhibition, MPC 2010, 2010-02-23 - 2010-02-25, Tripoli, Libya.

Abdulrahman, Ghaith and Stack, Margaret (2012) Erosion-corrosion of carbon steel in crude oil : Velocity effects on the erosion-corrosion map. In: 12th Mediterranean Petroleum Conference & Exhibition, MPC 2012, 2012-11-20 - 2012-11-22, Tripoli.

Antonov, Maksim and Stack, M.M. and Hussainova, Irina (2005) Interaction between particle erosion, aqueous corrosion and binder content in chromium carbide based cermets at room temperatures. In: 14th International Baltic Conference, Materials Engineering, 2005-10-06 - 2005-10-07, Kaunas, Lithuania.

Baillie, Philip and Campbell, Stuart and Galloway, Alexander and Cater, Stephen R. and McPherson, Norman (2014) A comparison of double sided friction stir welding in air and underwater for 6mm S275 steel plate. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Vancouver.

Boyle, James (2013) The role of uncertainty in creep mechanics. In: 4th Canadian Conference on Nonlinear Solid Mechanics, 2013-07-23 - 2013-07-26, Montréal.

Cairns, Jonathan and McPherson, Norman and Galloway, Alexander and MacPherson, M. and McKechnie, C. (2013) Optimised penetration for fillet welding. In: 17th International Conference on Joining Materials, JOM 17, 2013-05-05 - 2013-05-08, Helsingør.

Camilleri, Duncan (2008) Integrating finite element analysis in design and manufacture of welded structures. In: 17th Annual Conference on Marine Engineering: Beyond Our Shores, 2008-04-17 - 2008-04-17.

Camilleri, Duncan and Gray, Thomas and McPherson, Norman (2008) Numerical modelling of MIG welded multiply-stiffened plate structures to optimise fabrication procedure. In: 17th International Conference and Tutorial Workshop on Computer Technology in Welding and Manufacturing, 2008-06-17 - 2008-06-19, London.

Camilleri, Duncan and McPherson, Norman and Gray, Thomas (2012) The applicability of using low transformation temperature welding wire to minimise unwanted residual stresses and distortion. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23, London.

Campbell, Stuart and Galloway, Alexander and McPherson, Norman (2013) Derivation of forces acting on the liquid weld metal based on arc pressure measurements produced using alternating shielding gases in the GTAW process. In: 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013-08-04 - 2013-08-09, Hawaii.

Campbell, Stuart and Galloway, Alexander and McPherson, Norman and Camilleri, Duncan and Micallef, Daniel (2014) Modelling magnetohydrodynamics to investigate variation of shielding gases on arc characteristics in the GTAW process. In: International Conference on Materials and Product Technology, ICMPT14, 2014-08-07 - 2014-08-08, Vancouver.

Cater, Stephen R. and Martin, Jonathan and Galloway, Alexander and McPherson, Norman (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. In: Symposium on Friction Stir Welding and Processing, 2013-03-03.

Chen, Haofeng and Gorash, Yevgen (2013) Novel direct method on the life prediction of component under high temperature-creep fatigue conditions. In: 13th International Conference on Fracture, 2013-06-16 - 2013-06-21, Beijing.

Galloway, Alexander and McPherson, Norman (2006) Nitrogen retention/enrichment of 316LN austenitic stainless steel welds. In: FabTech International Conference, 2011-06-20. (Unpublished)

Gorash, Yevgen and Chen, Haofeng (2012) Application of the linear matching method to creep-fatigue failure analysis of cruciform weldment manufactured of the austenitic steel AISI type 316N(L). In: 4th International Conference on the Integrity of High Temperature Welds/9th International Conference on Creep and Fatigue at Elevated Temperatures, 2012-09-25 - 2012-09-27, London.

Gorash, Yevgen and Chen, Haofeng (2012) Creep-fatigue life assessment of high-temperature weldments using the linear matching method. In: RAMS: Recent Appointees in Materials Science, 2012-09-05 - 2012-09-07, Glasgow. (Unpublished)

Jackson, Colin and Wrzesien, Andrzej and Johnston, Ross P. and Uzzaman, Asraf and Lim, James (2012) Effect of reduced joint strength and semi-rigid joints on cold-formed steel portal frames. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow.

Li, Tianbai and Chen, Haofeng and Chen, Weihang and Ure, James Michael (2011) Ratchet limits for a crack in a welded pipe subjected to a cyclic temperature load an a constant mechanical load. In: ASME Pressure Vessels and Piping Conference, 2011-07-17 - 2011-07-21, Baltimore, Maryland,.

Macdonald, M. and Rhodes, J. (2004) Stainless steel stub columns subject to combined bending and axial loading. In: 17th International Speciality Conference on Cold Formed Steel Structures, 2004-11-04 - 2004-11-05, Orlando, Florida.

Mathew, M.T. and Stack, M.M. (2002) Micro-abrasion interactions of pure metals in bio-oils. In: Third International Symposium on Fuels and Lubricants, 2002-10-07 - 2002-10-09, New Delhi, India.

McConnell, B.K. and Banks, W.M. and Doyle, G.T. and Hayward, D. and Pethrick, R.A. (2007) Ageing in non isothermal environments of adhesively bonded metal structures. In: 30th Annual Meeting of the Adhesion Society, 2007-02-01 - 2007-02-01, Tampa Bay.

McPherson, Norman and Galloway, Alexander and Cater, Stephen R. and Osman, M.M. (2012) A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08, Chicago.

McPherson, Norman and Galloway, Alexander and Wood, James and Cater, Stephen R. (2012) A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate. In: 9th International Conference on Trends in Welding Research, 2012-06-04 - 2012-06-08, Chicago.

Micallef, Daniel and Camilleri, Duncan and Mollicone, Pierluigi (2013) Simplified thermo-elastoplastic numerical modelling techniques applied to friction stir welding of mild steel. In: ASME 2013 International Mechanical Engineering Congress and Expositi, 2013-11-15 - 2013-11-21, San Diego.

Mollicone, Pierluigi and Camilleri, Duncan and Gray, Thomas (2007) Procedural influences on non-linear distortions in welded thin plate fabrication. In: Retiral Conference to celebrate the work of Professor Jim Rhodes, 2007-06-26, Glasgow.

Mridha, Shahjahan and Baker, Neville (2014) Oxidation protection behaviour of titanium aluminide coatings develped by TIG technique. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Dubai. (In Press)

Mridha, Shahjahan and Idriss, A.N. and Baker, Thomas (2011) Incorporation of TiC particles on AlSi 4340 low alloy steel surfaces via tungsten inert gas melting. In: 14th international Conference on Advances in Materials and Processing Technologies, 2011-07-13 - 2011-07-16, Istanbul,.

Munoz De Escalona, Patricia and Mridha, Shahjahan and Baker, neville (2014) Effect of shielding gas on the properties and microstructure of melted steel surface using a TIG torch. In: International Conference on Advances in Materials and Processing Technologies, AMPT 2014, 2014-11-16 - 2014-11-20, Dubai. (In Press)

Muscat, Martin and Camilleri, Duncan (2012) Comparison between different design approaches to prevent buckling of torispherical heads under internal pressure. In: 13th International Conference on Pressure Vessel Technology (ICPVT-13), 2012-05-20 - 2012-05-23, London.

Parvez, Shahid and Abid, Muhammad and Fawad, Hassan and Nash, David (2010) The effect of electrode tip angle on arc and anode temperature in GTAW. In: 7th Jordanian International Mechanical Engineering Conference, JIMEC'7, 2010-09-27 - 2010-09-29, Amman.

Roy, Mannish and Stack, Margaret (2003) An electrochemical technique to measure wear of metals in polymers in corrosive environments. In: Tribology - Science and Application Conference, 2003-04-23 - 2003-04-27, Vienna.

Stack, M.M. and Jawan, H. and Mathew, M.T. (2004) Some thoughts on micro-abrasion mapping of steels in corrosive environments. In: 8th International Conference on Tribology, 2004-03-24 - 2004-03-27, Pretoria, South Africa.

Stack, M.M. and Mathew, M.T. (2002) Micro-abrasion mapping of steels: some thoughts on the construction of micro-abrasion maps. In: International Conference on Materials and Tribology, 2002-09-12 - 2002-09-13, Dublin, Ireland.

Stack, M.M. and Abdelrahman, Shehab (2010) CFD modelling of erosion-corrosion of steel in aqueous environments : particle concentration effects on the regime boundaries. In: 14th Nordic Conference on Tribology, NordTrib 2010, 2010-06-08 - 2010-06-11, Luleå, Sweden.

Stack, M.M. and Abdulrahman, Ghaith and Jana, B. (2009) A map and a pipe: a new approach to characterizing erosion-corrosion regimes of Fe in three dimensions using CFD modelling. In: EuroCorr 2009, 2009-09-06 - 2009-09-10, Nice, France.

Stack, Margaret (1995) Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions. In: Workshop on Corrosion in Alumina Plants, 1995-06-06 - 1995-06-08.

Stack, Margaret and Abdelrahman, Shehab (2009) Some reflections on a model to predict the erosion rate of the passive film on pure metals. In: 13th International Conference on Aerospace Science and Aviation Technology, ASAT 2009, 2009-05-26 - 2009-05-28, Cairo, Egypt.

Stack, Margaret and Chacón-Nava, José G. and Stott, F.H. (1998) The erosion-corrosion performance of mild steel and SA313-T22 steel in low velocity conditions. In: 3rd NACE Latin American Region Corrosion Conference, 1998-10-01, Mexico.

Stack, Margaret and Stott, F.H. and Wood, G.C. (1991) Erosion-corrosion mechanisms in fluidized bed environments : materials for combined cycle power plant. In: UNSPECIFIED.

Stott, F.H. and Tiong, K.K. and Stack, Margaret (1991) The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions. In: The European Corrosion Congress, EUROCORR 91, 1991-10-21 - 1991-10-25, Budapest.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Burling, Paul and Stanhope, Chris (2014) Friction stir welding of steel for marine applications. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014, 2014-06-08 - 2014-06-13, San Francisco.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Micallef, Daniel and Camilleri, Duncan and Poletz, Nicolas and Arbaoui, Larbi (2014) Advances in friction stir welding of steel : Project HILDA. In: Transport Research Arena (TRA2014), 2014-04-14 - 2014-04-17, Paris.

Toumpis, Athanasios and Galloway, Alexander and Cater, Stephen R. and Molter, Lars (2014) A techno-economic evaluation of friction stir welding of DH36 steel. In: 10th Friction Stir Welding Symposium, 10FSWS, 2014-05-20 - 2014-05-22, Beijing.

Toumpis, Athanasios and Galloway, Alexander and Polezhayeva, Helena and Molter, Lars (2015) Fatigue assessment of friction stir welded DH36 steel. In: TMS Annual Meeting and Exhibition, TMS2015, 2015-03-15 - 2015-03-19, Orlando. (Submitted)

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Experimental and analytical studies of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) Parametric studies and design recommendations of cold-formed steel sections with web openings subjected to web crippling. In: 6th International Conference on Coupled Instabilities in Metal Structures, CIMS 2012, 2012-12-03 - 2012-12-05, Glasgow.

Uzzaman, Asraf and Lim, James and Nash, David and Rhodes, James and Young, Ben (2012) The effects of web opening on web crippling strength of cold-formed steel channels under interior-two-flange loading condition. In: 21st International Specialty Conference on Cold Formed Steel Structures, 2012-10-24 - 2013-03-25, St Louis.

Uzzaman, Asraf and Wrzesien, A.M. and Hamilton, Robert and Lim, JBP and Nash, David (2013) Investigation of cold-formed steel top-hat sections under bending. In: 14th International Conference on Civil, Structural and Environmental Engineering Computing, ICC2013, 2013-09-03 - 2013-09-06, Cagliari, Sardinia.

Uzzaman, Asraf and Wrzesien, Andrzej and Hamilton, Robert and Lim, James B.P. and Nash, David (2014) Numerical investigation of cold-formed steel top-hat purlins. In: 22nd Specialty Conference on Cold-Formed Steel Structures, CCFSS 2014, 2014-11-05 - 2014-11-06, St Louis. (In Press)

Review

Stack, Margaret (1996) Book Review : Fretting and Fatigue. [Review]

This list was generated on Fri Nov 28 12:14:31 2014 GMT.