Strathprints Home | Open Access | Browse | Search | User area | Copyright | Help | Library Home | SUPrimo

Browse by Author or Creator

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item type | No Grouping
Number of items: 55.

Article

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh and Rout, Bijay Kumar and Corney, Jonathan (2013) Influences of design tools on the original and redesign processes. International Journal of Design Creativity and Innovation. ISSN 2165-0349

Cairns, Nicola and Murray, Kevin and Corney, Jonathan and McFadyen, Angus (2013) Satisfaction with cosmesis and priorities for cosmesis design reported by lower limb amputees in the United Kingdom : instrument development and results. Prosthetics and Orthotics International. ISSN 0309-3646

Bourne, David and Corney, Jonathan and Gupta, Satyandra K. (2011) Recent advances and future challenges in automated manufacturing planning. Journal of Computing and Information Science in Engineering, 11 (2). -. ISSN 1530-9827

Torres-Sanchez, C. and Corney, J. R. (2011) Morphological and biological characterization of density engineered foams fabricated by ultrasonic sonication. Journal of Materials Science, 46 (2). pp. 490-499. ISSN 0022-2461

Corney, Jonathan and Torres-Sanchez, Carmen and Jagadeesan, Ananda Prasanna and Yan, Xiu and Regli, W.C. and Medellin, H. (2010) Putting the crowd to work in a knowledge-based factory. Advanced Engineering Informatics, 24 (3). pp. 243-250. ISSN 1474-0346

Sung, Raymond C.W. and Ritchie, J.M. and Rea, Heather and Corney, Jonathan (2010) Automated design knowledge capture and representation in single-user CAD environments. Journal of Engineering Design. pp. 1-17. ISSN 0954-4828

Medellin, H. and Corney, J.R. and Ritchie, J.M. and Lim, Theodore (2010) Automatic generation of robot and manual assembly plans using octrees. Assembly Automation, 30 (2). pp. 173-183. ISSN 0144-5154

Sung, Raymond C.W. and Ritchie, James M. and Robinson, Graham and Day, Philip N. and Corney, J.R. and Lim, Theodore (2009) Automated design process modelling and analysis using immersive virtual reality. Computer-Aided Design, 41 (12). pp. 1082-1094. ISSN 0010-4485

Torres-Sanchez, Carmen and Corney, Jonathan (2009) Porosity tailoring mechanisms in sonicated polymeric foams. Smart Materials and Structures, 18 (10). pp. 1-13. ISSN 0964-1726

Torres-Sanchez, C. and Corney, J. (2009) Identification of formation stages in a polymeric foam customised by sonication via electrical resistivity measurements. Journal of Polymer Research, 16 (5). pp. 461-470. ISSN 1022-9760

Torres-Sanchez, C. and Corney, J.R. (2009) Toward functionally graded cellular microstructures. Journal of Mechanical Design, 131 (9). 091011. ISSN 1050-0472

Corney, J.R. and Torres-Sánchez, C. and Jagadeesan, P. and Lynn, A. and Regli, W. (2009) Outsourcing labour to the cloud. International Journal of Innovation and Sustainable Development, 4 (4). 294 - 313. ISSN 1740-8822

Lim, T.C. and Medellin, H. and Sun, R. and Ritchie, J.M. and Corney, J.R. (2009) Virtual assembly rapid prototyping of near net shapes. Ingeniería Mecánica. Tecnología y Desarrollo, 3 (2). ISSN 1029516X

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T. and Ritchie, J.M. (2008) Octree-based production of near net shape components. IEEE Transactions on Automation Science and Engineering, 5 (3). pp. 457-466. ISSN 1545-5955

Torres-Sanchez, C. and Corney, J.R. (2008) Effects of ultrasound on polymeric foam porosity. Ultrasonics Sonochemistry, 15 (4). pp. 408-415. ISSN 1350-4177

Medellin, H. and Lim, T.C. and Corney, J.R. and Ritchie, J.M. and Davies, J.B.C. (2007) Automatic subdivision and refinement of large components for rapid prototyping production. Journal of Computing and Information Science in Engineering, 7 (3). pp. 249-258. ISSN 1530-9827

Lim, T.C. and Ritchie, J.M. and Dewar, R. and Corney, J.R. and Wilkinson, P. and Callis, M. and Desmulliez, M. and Fang, J.J. (2007) Factors affecting user performance in haptic assembly. Virtual Reality, 11 (4). pp. 241-252. ISSN 1359-4338

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T.C. and Ritchie, J.M. (2006) Algorithms for the physical rendering and assembly of octree models. Computer-Aided Design, 38 (1). pp. 69-85. ISSN 0010-4485

Clark, D. and Corney, J.R. and Mill, F. and Rea, H. and Sherlock, A. and Taylor, N.K. (2006) Benchmarking shape signatures against human perceptions of geometric similarity. Computer-Aided Design, 38 (9). pp. 1038-1051. ISSN 0010-4485

Rea, H. and Corney, J.R. and Clark, D. and Taylor, N.K. (2006) Commercial and business issues in the e-sourcing and reuse of mechanical components. International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 952-958. ISSN 0268-3768

Sung, R. and Corney, J.R. and Towers, D.P. and McPherson, F. and Hand, D. and Clark, D. and Gross, M. and Black, I. (2006) Direct writing of images onto 3D surfaces. Industrial Robot: An International Journal, 33 (1). pp. 27-36. ISSN 0143-991X

Corney, J.R. and Hayes, C. and Sundararajan, V. and Wright, P. (2005) The CAD/CAM interface: a 25-year retrospective. Journal of Computing and Information Science in Engineering, 5 (3). pp. 188-197. ISSN 1530-9827

Lim, T.C. and Medellin, H. and Torres-Sanchez, C. and Corney, J.R. and Ritchie, J.M. and Davies, J.B.C. (2005) Edge-based identification of DP-features on freeform solids. IEEE Transactions on Pattern Analysis and Machine Intelligence, 27 (6). pp. 851-860. ISSN 0162-8828

Rea, H. and Sung, R. and Corney, J.R. and Clark, D. and Taylor, N.k. (2005) Interpreting three-dimensional shape distributions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (6). pp. 553-566. ISSN 0954-4062

Medellin, H. and Corney, J.R. and Davies, J.B.C. and Lim, T.C. and Ritchie, J.M. (2004) An automated system for the assembly of octree models. Assembly Automation, 24 (3). pp. 297-312. ISSN 0144-5154

Corney, Jonathan R. and Rea, Heather and Clark, Doug and Pritchard, John and Breaks, Michael and MacLeod, Roddy (2002) Course filters for shape matching. IEEE Computer Graphics and Applications, 22 (3). pp. 65-74. ISSN 0272-1716

Corney, J.R. and Rea, H. and Clark, D. and Pritchard, J. and Breaks, M. and MacLeod, R. (2002) Part sourcing in a global market. Concurrent Engineering: Research and Applications, 10 (4). pp. 325-334. ISSN 1063-293X

Corney, J.R. and Rea, H. and Clark, D. and Pritchard, J. and Sung, R. (2002) ShapeSifter: a retrieval system for databases of 3D engineering data. New Review of Information Networking, 8 (1). pp. 33-54. ISSN 1361-4576

Lim, T.C. and Corney, J.R. and Clark, D. (2001) Laminae-based feature recognition. IEEE Transactions on Pattern Analysis and Machine Intelligence, 23 (9). pp. 1043-1048. ISSN 0162-8828

Sung, R. and Corney, J.R. and Clark, D. (2001) Automatic assembly feature recognition and disassembly sequence generation. Journal of Computing and Information Science in Engineering, 1 (4). pp. 291-299. ISSN 1530-9827

Lim, T.C. and Corney, J.R. and Ritchie, J.M. and Clark, D. (2001) Optimizing tool selection. International Journal of Production Research, 39 (6). pp. 1239-1256. ISSN 0020-7543

Book Section

Corney, Jonathan and Annamalai Vasantha, Gokula Vijayumar and Lynn, Andrew and Jagadeesan, Ananda Prasanna and Acur Bakir, Nuran and Smith, Marisa and Agarwal, Anupam (2013) Computing the incomputable with human processing units. In: Intelligent interactive technologies and multimedia. Communications in computer and information science, 276 . Springer, pp. 14-24. ISBN 9783642374623

Ritchie, J.M. and Sung, Raymond C.W. and Robinson, Graham and Day, Philip N. and Dewar, R.G. and Corney, J.R. and Simmons, J.E.L. (2008) Automated design analysis, assembly planning and motion study analysis using immersive virtual reality. In: Product Engineering: Tools and Methods Based on Virtual Reality. Intelligent Systems, Control and Automation: Science and Engineering, 35 . Springer, Dordrecht, The Netherlands, p. 485. ISBN 9781402081996

Salamon, C. and Corney, J.R. and Ritchie, J.M. (2008) Information hiding through variance of the parametric orientation underlying a B-rep face. In: Information Hiding: 10th International Workshop, IH 2008, Sana Barbara, CA, USA, May 19-21, 2008, Revised Selected Papers. Lecture Notes in Computer Science, 5284 . Springer, Berlin, Germany, pp. 268-282. ISBN 9783540889601

Corney, J.R. and Torres-Sanchez, C. (2008) Towards functionally graded cellular microstructures. In: Smart Materials, Adaptive Structures and Intelligent Systems. ASME Conference Proceedings, 1 . ASME, pp. 45-53. ISBN 978-0-7918-4331-4

Ritchie, J.M. and Sung, Raymond C.W. and Rea, H. and Lim, T. and Corney, J.R. and Howley, I. (2008) The use of non-intrusive user logging to capture engineering rationale, knowledge and intent during the product life cycle. In: 2008 Portland International Conference on Management of Engineering & Technology. Institute of Electrical and Electronics Engineers. ISBN 9781890843175

Conference or Workshop Item

Annamalai Vasantha, Gokula Vijayumar and Corney, Jonathan and Acur Bakir, Nuran and Lynn, Andrew and Jagadeesan, Ananda Prasanna and Smith, Marisa and Agarwal, Anupam (2014) Social implications of crowd sourcing in rural Scotland. In: International Conference on Advances in Social Science, Economics and Management Study - SEM, 2014-06-01 - 2014-06-02, London. (In Press)

Annamalai Vasantha, Gokula Vijayumar and Hussain, Romana and Roy, Rajkumar and Corney, Jonathan (2013) Requirements for computer-aided product-service systems modeling and simulation. In: The 4th International Conference on Research Into Design, Indian Institute of Technology, Chennai, 2013-01-06, Chennai.

Annamalai Vasantha, Gokula Vijayumar and Chakrabarti, Amaresh and Corney, Jonathan (2012) Influences of design tools on concepts generation. In: 2nd International Conference on Design Creativity (ICDC), 2012-09-18 - 2012-09-20, Glasgow.

Cairns, Nicola and Corney, Jonathan and Murray, Kevin (2012) Mechanical testing of polyurethane foams to cover lower limb prostheses. In: Orthopadie + Reha-Technik 2012, 2012-05-15 - 2012-05-18, Leipzig.

Mair, Gordon and Divis, Pavel and Corney, Jonathan (2011) Desktop scanner based metrology. In: M2VIP 18th International Conference, 2011-12-06 - 2011-12-07, Brisbane.

Cairns, Nicola Jeanne and Corney, Jonathan and Murray, Kevin (2011) What do lower limb amputees think of their cosmesis? In: ISPO UK NMS Scientific Meeting and Exhibition, 2011-10-07 - 2011-10-08, London.

Yip, Arthur Lan Kuan and Jagadeesan, Ananda Prasanna and Corney, Jonathan and Qin, Yi (2011) Development of a front-end system for customised product specification in the ManuCloud. In: The 22nd International Conference on Computer-Aided Production Engineering (CAPE2011), 2011-04-27 - 2011-04-28, Edinburgh.

Jagadeesan, P. and Wenzel, J. and Corney, J.R. and Yan, X.T. and Sherlock, A. and Torres-Sanchez, C. and Regli, W. (2009) Validation of purdue engineering shape benchmark clusters by crowdsourcing. In: Proceedings of the International Conference on Product Lifecycle Management, 2009-07-06 - 2009-07-08, Bath, UK.

Lim, Theodore and Medellin, Hugo and Sung, Raymond C.W. and Ritchie, James M. and Corney, Jonathan (2009) Virtual bloXing - assembly rapid prototyping for near net shapes. In: World Conference on Innovative VR, 2009-02-25 - 2009-02-26, Chalon-sur-Saone, France.

Torres-Sanchez, C. and Corney, J.R. (2008) Towards functionally graded cellular microstructures. In: Adaptive Structures and Intelligent Systems SMASIS08, 1900-01-01.

Jagadeesan, P. and Wenzel, J. and Corney, J.R. and Yan, X.T. and Sherlock, A. and Regli, W. (2008) Geometric Reasoning With a Virtual Workforce (Crowdsourcing for CAD/CAM). In: VirMan 08 part of the 5th INTUITION International Conference: Virtual Reality in Industry and Society: From Research to Application,, 2008-10-06 - 2008-10-08, Torino, Italy.

Corney, J. and Wren, G. and Rosochowski, A. and Ewing, H. and Yi, Q. and Stack, M. (2008) The Advanced Forming Research Centre at Strathclyde University: aims, objectives and methodologies. In: SMEA Conference and Exhibition, The Influence of Rolling and Forging on Product Quality and Properties, 2008-06-17 - 2008-06-18, Sheffield, UK.

Ritchie, James M. and Sung, R. and Rea, H. and Lim, T. and Corney, J.R. and Salamon, Csaba and Howley, I. (2008) Automated knowledge capture in 2D and 3D design environments. In: 2nd International Workshop Virtual Manufacturing VirMan 08 as part of the 5th INTUITION International Conference: Virtual Reality in Industry and Society: From Research to Application, 2008-10-06 - 2008-10-08, Torino, Italy.

Ritchie, J.M. and Lim, T. and Sung, R.C.W. and Corney, J.R. and Rea, H. (2007) The Analysis of design and manufacturing tasks using haptic and immersive VR - Some case studies. In: 2nd Advanced study institute on product engineering tools and methods based on virtual reality, 2007-05-30 - 2007-06-06, Chania, Creete.

Proceedings Paper

Yan, Xiu and Corney, Jonathan (2013) A novel haptic model and environment for maxillofacial surgical operation planning and manipulation. [Proceedings Paper]

Yip, Arthur Lan Kuan and Jagadeesan, Ananda Prasanna and Qin, Yi and Corney, Jonathan (2012) Towards a dynamically generated product configurator that reflects the available manufacturing capability. [Proceedings Paper]

Rauschecker, Ursula and Meier, Matthias and Muckenhirn, Ralf and Yip, Arthur Lan Kuan and Jagadeesan, Ananda Prasanna and Corney, Jonathan (2011) Cloud-based manufacturing-as-a-service environment for customized products. [Proceedings Paper]

Yip, Arthur Lan Kuan and Jagadeesan, Ananda Prasanna and Corney, Jonathan and Qin, Yi and Rauschecker, Ursula (2011) A front-end system to support cloud-based manufacturing of customised products. [Proceedings Paper]

Jagadeesan, P. and Lynn, A. and Wenzel, J. and Corney, J.R. and Yan, X.T. and Sherlock, A. and Torres-Sanchez, C. and Regli, W. (2009) Geometric reasoning via internet crowdsourcing. [Proceedings Paper]

This list was generated on Sat Apr 19 00:05:57 2014 BST.